Download Graco 3A2496D User's Manual

Installation
b. Non-Graco Isolated Enclosure: Connect
hose as instructed in the isolation system
manual, and comply with the requirements
in the Warning below.
For Shielded Hose Systems:
Conductive hose layer (C) must be
grounded through its connection to the
isolation system’s grounded enclosure (L)
or grounded fence. To maintain grounding
continuity, the conductive hose layer (C)
must be engaged in the ferrule when the
strain relief nut is tightened. Failure to
properly install the hose in the strain relief
could result in an electric shock.
3A2496D
Figure 18 Shielded Fluid Hose Connection
at Non-Graco Isolation Enclosure
c.
Connect the end of the tube (T) to the pump
fluid outlet fitting (Z).
NOTE: The Graco warranty and approvals are
void if the electrostatic spray gun is connected
to a non-Graco voltage isolation system or if the
gun is operated above 60 kV.
21