Download GE WMTS Data Sheet

GE
Lighting Solutions
Area Lighting
Wallmount™ 400 (WMTS)
imagination at work
Product Features
For that extra security in an insecure world, GE Area Wallighters provide light were needed, on pathways, entrances,
walkways, and building parameters. These area wallighters offer an attracitve, yet economical solution to those outdoor lighting needs where a wall-mounted fixture is the only practical choice.
Applications
Unique Features
•
•
•
•
•
•
•
•
Building perimeter security, high-activity entrances, loading docks and small work areas adjacent to buildings
Wall mounted luminaire applications where high light levels and low costs are required
Housing
• Die-cast aluminum housing means rugged,
long-lasting construction
Finish
• Dark Bronze polyester powder paint finish is standard. Provides corrosion resistant finish
Rating
•
/
1598 Listed Suitable for Wet Locations
Reflectors
•
Enclosed and gasketed borosilicate glass
refractor provides long-lasting, non-yellowing
optics with high thermal and impact resistance
Easily removable, side-hinged, gasketed door
Complete front access to lamp and ballast for easy maintenance and relamping
Multiple threaded conduit entrances
Factory-installed UL Listed internal button photo
electric control provides dusk-to-dawn operation. Field installed (Non-UL Listed) PE kit is optional
Mogul base porcelain lamp socket – E39 standard
Improved packaging design keeps glass refractor and die-cast housing separate
to significantly reduce chances of glass fracture
during shipment
Ordering Number Logic
Wallmount™ 400 (WMTS)
W
_ M
_ _TS_ - _ _
Prod. ID
wattage
WMTS =
17 =175
Wallmount 400 25 =250
Luminaire
40 =400
-
_
-
Light
Source
_
-
Voltage
D
_B
_
-
__
OPTIONs
color
E = Energy Act 60Hz
Compliant Pulse 0 = 120/208/
MH (EPMH)
240/277 S = HPS
Multivolt
1 = 120
Standard: Lamp 2 = 208
not included
3 = 240
4 = 277
5 = 480
D = 347
F = 120X347
DB = Dark Bronze
Standard
F = Fusing (Not Available on multivolt or 120 x 347)
PE = Factory-installed button p­ hotoelectric control.
Discrete voltage required — specify 120, 208, 240, 277 or 347 volt.
*NOTE: Factory installed PE require
*NOTE: Not available in 120x347 or 480 volt.
longer lead times.
Contact Manufacturer.
Ballast and Photometric Selection Table
All light sources are clear unless otherwise indicated.
Ballast Type/Voltage
60Hz
Light
Wattage
Source
Multivolt
480
120 X 347
Photometric
Curve Number
35-
250
400
175
250
250
400
400
171134
171133
171137
171135
171136
171131
171132
HPS
HPS
EPMH
EPMH
EPMH (Coated)
EPMH
EPMH (Coated)
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Product Dimensions
0.31-in. (8 mm) DIA. MOUNTING HOLES (3 PLACES)
12.17 in.
(309 mm)
13.00 in.
(330 mm)
6.09 in.
(155 mm)
5.53 in.
(142 mm)
9.00 in.
(229 mm)
18.11 in.
(460 mm)
Accessory Dimensions
WIRE GUARD WG-WMTS
2.1
3 in
6
(15 .13 in
6m .
m)
. (5
POLYCARBONATE VANDAL SHIELD
LVS-WMTS
4m
m)
17
(43 .00 in
2m .
m)
10
(26 .50 in
7m .
m)
PHOTOELECTRIC CONTROL KIT
BUTTON PC
D ATA
10
(25 .09 in
6m .
m)
16
(40 .12 in
9m .
m)
APPROX.
14.000 in.
(356 mm)
• Approximate Net Weight: 25-40 lbs (11-18 kgs)
• Suggested Mounting Height: 8-20 ft. (2-6 M)
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1-8 8 8 - 6 9 - 4 3-533
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
OLP-2953 (Rev. 06/19/12)