Download GE WM7M Data Sheet

GE
Lighting Solutions
Area Lighting
Wallmount™ 175 (WM7M & WM7S)
imagination at work
Product Features
For that extra security in an insecure world, GE Area Wallighters provide light were needed, on pathways, entrances,
walkways, and building parameters. These area wallighters offer an attracitve, yet economical solution to those outdoor lighting needs where a wall-mounted fixture is the only practical choice.
Applications
Unique Features
•
•
•
•
•
•
•
•
•
Building perimeters, entrances, walkways, residential yards and loading docks
Area lighting applications where a glass refractor is needed or desired
Housing
• Die-cast aluminum housing and door
Finish
• Dark bronze polyester powder finish
• Electrocoat paint finish
Rating
•
•
/
1598 Listed Suitable for Wet Locations
listed to Canadian National Standards and Codes
Mounting
• Multiple junction box mounting patterns (3.25 in. [83mm] octagonal, 4-in [102mm] octagonal,
2-in. X 4-in. [51X102mm] rectangle)
Reflectors
•
•
Prismatic borosilicate refractor
“Snap-in” anodized aluminum reflector
Standard and tamper-resistant hardware included
Complete front acess to ballast and lamp
Side-hinged front door
Top .5 in. (13mm) threaded conduit entrance
Knock-out for field installed photoelectric control kit (Order kit separately)
Two socket sizes available: mogul base – E39
standard and medium base – E26 standard (lamp included with medium base)
Enclosed and Gasketed
Ordering Number Logic
Wallmount™ 175 (WM7M & WM7S)
_ _ _ _ - _ _
-
_
-
_
Light
Source
-
_
ballast
type
selection
-
_
SN4
___
-
IES
Distribution
type
PE
Function
Prod. ID
wattage
WM7M =
Wallmount
175 Luminaire
(Mogul Base
E39 Socket
Standard
without Lamp)
See Ballast and See Ballast and See Ballast and
Photometric
Photometric
Photometric
Selection Table Selection Table Selection Table
See Ballast
1 = None
and Photometric 3 = Internal
Selection Table
*PE control
See Ballast and
Photometric
Selection Table
60Hz
0 = 120/208/
240/277 Multivolt
1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
C = 120x240x
277V
D = 347
F = 120X347*
T = 220
A = Autoreg
* Not available H = HPF
with multivolt Reactor or or 480V
Lag
K = Hot Restart*
N = NPF
Reactor or
Lag
SN4 = Short,
Non-cutoff, Type IV
WM7S =
Wallmount
175 Luminaire
(Medium Base
E26 Socket
Standard with
Lamp)
05 =50
07 =70
10 =100
15 =150 (55V)
17 =175
Voltage
E = Energy Act
Compliant Pulse
MH (EPMH)
S = HPS
M= MH
P= PMH
-
__
color
DB = Dark Bronze
GR = Gray
-
_
OPTIONs
B = Time Delay Automatically
Switched Quartz
F = Fusing—Not available with
multivolt or 120X347 volt
(Non-UL)
L = Latch on door
(Non-UL)
*Available in WM7M only.
(Non-UL)
50Hz
6 = 220
*NOTE: 120X347V
connected for
120V
Ballast and Photometric Selection Table
All light sources are clear unless otherwise indicated.
Ballast Type/Voltage
60Hz
Ballast Type/Voltage
50Hz
Light
208, 347,
Wattage
Source
Multivolt
120
240, 480
277
120X347
220
220
IES
Distribution
Type
Photometric
Curve Number
35-
WM7M Mogul Base Without Lamp
50, 70, 100, 150 (55V)
175
HPS
MH
H, N
N/A
H, K, N
N/A
H, N
N/A
H, N
N/A
H
A
H
A
H
A
SN4
SN4
177576
177580
WM7S Medium Base With Lamp
50, 70, 100, 150 (55V)
70, 100
HPS
PMH H, N
H
H, N
N/A
N/A
N/A
H,N
N/A
N/A
N/A*
N/A
N/A
H
H
SN4
SN4
177576
177580
150****
PMH
H*** H
H
H,A
H,A
N/A
N/A
SN4
177580
NOTE: N/A = Not Available.
**347 available “H”
***150W PMH Available in Tri-Volt Multivolt: 120X208X277V or 120X240X277V
****150W PMH Only available in HPF-LAG (H) Ballast Type for 120 or 208 or 240 or 277V and Auto-Reg (A) in 120 or 277V
Product Dimensions
4.375 in.
(111 mm)
.188 in. (5 mm) DIA KNOCKOUT
FOR USE WITH GEMBOX
(2 PLACES)
.500 in. (13 mm) NPT
CENTERLINE
5.774 in.
(147 mm)
.312 in. (8 mm) DIA
KNOCKOUT
(4 PLACES)
.615 in. DIA (41 mm) DIA KNOCKOUT
FOR PHOTOELECTRIC KIT
7.950 in.
(202 mm)
9.750 in.
(248 mm)
2.875 in.
(73 mm)
1.312 in.
(33 mm)
7.750 in.
(197 mm)
.875 in. (22 mm) DIA
KNOCKOUT
.188 in. (5 mm) DIA KNOCKOUT
FOR USE WITH 3.000 in. (76 mm)
OCTAGON BOX (4 PLACES)
BACK VIEW
D ATA
.188 in. (5 mm) DIA KNOCKOUT
FOR USE WITH 4.000 in. (102 mm)
OCTAGON BOX (4 PLACES)
SIDE VIEW
.625 in.
(16 mm)
12.625 in.
(321 mm)
FRONT VIEW
• Approximate Net Weight: 20-25 lbs (9-11 kgs)
• Suggested Mounting Height: 8-20 ft. (3-6 M)
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1-8 8 8 - 6 9 - 4 3-533
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
OLP-2952 (Rev. 06/19/12)