Download GE Ultra Thin Data Sheet
Transcript
GE Lighting Solutions LED Lamps for Programmable View Modules 5.5 inch Features, Benefits and Values • • • • • • High efficiency & long life LED light source Failure of single LED results in loss of light from only that LED Moisture and dust resistant Direct retrofit design Regulated power supply Conforms to Caltrans light intensity requirements LED Lamps for Programmable View Modules • 5.5 inch Mechanical Outline Dimensions in inches. (mm) indicates metric equivalent 5.6" (142) 5.6" 1.2" (142) (30) 3" (76) Design Compliance 1.2" (30) Operating Specifications Test Type Compliance Chromaticity ITE VTCSH-STD Part 2 Moisture Resistance NEMA STD 250 Type 4 - 1991 Mechanical Vibration MIL-STD-883 Method 2007 Electronic Noise FCC Title 47 Sec 15 Sub. B1 Transient Voltage Protection Controller Compatibility 1 3" (76) ITE VTCSH-STD Part 2 NEMA TS-2-1992 Parameter Rating Operating Temperature Range Operating Voltage Range -40 to + 74°C (-40 to +165°F) 80 to 135 V (60Hz AC) Power Factor (PF) > 90 % Total Harmonic Distortion (THD) < 20 % Lens & Shell Material UV Stabilized Polycarbonate Note: To ensure full interoperability, the dimming option and its resistor must be disconnected before turning on the LED lamp. Class A Product Information AC Model NumberVoltage PowerWavelengthMaintained (W) (nm) Intensity (Cd/m2) • • • ----Nominal------- Nominal Dominant Minimum2- DR3-RCFB-01A 120V – 60 Hz 10 626 314 DR3-YCFB-01A 120V – 60 Hz 14 589 314 DR3-GCFB-01A 120V – 60 Hz 10 508 314 Distributed by: - Standard product equipped with spade connectors. 2 Test condition : Ta = 25°C GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com 1-888-69-43-533 GE Lighting Solutions is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company. © 2010 GE Lighting Solutions. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. TRAF020-R120110