Download Garmin Software Version 1578.01 Cockpit Reference Guide

Flight Planning
Flight
Instruments
4) Press the ENT Key to accept the selected name.
5) If desired, define the type and location (i.e., LAT/LON, RAD/RAD or RAD/
DIS) of the waypoint.
EIS
6) Press the ENT Key to accept the new waypoint.
8) Press the FMS Knob to remove the flashing cursor.
9) Press the GO BACK Softkey to return to the map page.
DELETE A USER WAYPOINT
1) Turn the large FMS Knob to select the ‘WPT’ page group.
Flight
Planning
GPS Nav
Nav/Com/
XPDR/Audio
7) If desired, change the storage method of the waypoint to “TEMPORARY” or
“NORMAL” by moving the cursor to “TEMPORARY” and selecting the ENT
Key to check or uncheck the box.
2) Turn the small FMS Knob to select the User WPT Information Page.
Procedures
3) Press the FMS Knob to activate the cursor.
4) Turn the large FMS Knob to the place the cursor in the ‘USER WAYPOINT LIST’
field.
Hazard
Avoidance
5) Turn the small FMS Knob to highlight the desired waypoint.
6) Press the DELETE Softkey.
Additional
Features
7) The message ‘Would you like to delete the user waypoint?’ is displayed. With
‘YES’ highlighted, press the ENT Key.
Abnormal
Operation
CREATE A FLIGHT PLAN
Annun/Alerts
NOTE: When creating a flight plan in the Active Flight Plan Window, the first
leg is activated automatically after it is created.
Index
Appendix
Creating an active flight plan:
1) Press the FPL Key.
2) Press the FMS Knob to activate the cursor (only on MFD).
3) Turn the small FMS Knob to display the Waypoint Information Window.
(Turning it clockwise displays a blank Waypoint Information Window,
turning it counter-clockwise displays the Waypoint Information Window
with a waypoint selection submenu allowing selection of active flight plan,
nearest, recent, user, or airway waypoints).
30
Garmin G1000 Cockpit Reference Guide for the Piper PA-34-220T Seneca
190-01405-00 Rev. A