Download Garmin Software Version 0985.02 Cockpit Reference Guide

Transcript
Hazard Avoidance
Flight
Instruments
Hazard Avoidance
Customizing the Hazard Displays on the Navigation Map
Nav/Com/
XPDR/Audio
1) With the Navigation Map Page displayed, press the MENU Key to display
the Navigation Map Page Menu. The cursor flashes on the ‘Map Setup’
option.
GPS Nav
3) Press the small FMS Knob to return to the Navigation Map Page.
STORMSCOPE® (Optional)
2) Press the STRMSCP Softkey. Press the STRMSCP Softkey again to remove
Stormscope Lightning Data from the Navigation Map Page.
Additional
Features
Symbol
Annun/Alerts
Strike is between 6 and 60 seconds old
Strike is between 1 and 2 minutes old
Strike is between 2 and 3 minutes old
Appendix
Select ‘Cell’ or ‘Strike’ as the Stormscope Lightning Mode
2) Turn the large FMS Knob to select ‘STRMSCP MODE’.
Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
35
Index
1) With the Weather Group selected, press the ENT Key. The cursor flashes on
‘STRMSCP LTNG’.
190-00929-01 Rev. A
Hazard
Avoidance
1) Press the MAP Softkey.
Procedures
Displaying Stormscope Lightning Data on the Navigation Map Page
Flight
Planning
WARNING: The Stormscope system is not intended to be used for hazardous
thunderstorm penetration. Weather information on the G1000 MFD is
approved for weather avoidance only. Refer to the WX-500 Pilot’s Guide for
detailed operation.
Lightning Age
Strike is less than 6 seconds old
AFCS
2) Press the ENT Key. The Map Setup Menu is displayed. Turn the small FMS
Knob to select ‘Weather’ to customize the display of weather features.
Select ‘Traffic’ to customize the display of traffic.