Download Garmin Software Version 0767.05 Cockpit Reference Guide

Transcript
Flight Planning
6) With ‘OK’ highlighted, press the ENT Key to delete the flight plan. To cancel,
turn the large FMS Knob to highlight ‘CANCEL’ and press the ENT Key.
Flight
Instruments
5) Press the DELETE Softkey. A ‘Delete flight plan #?’ confirmation window is
displayed.
EIS
GRAPHICAL FLIGHT PLAN CREATION
Hazard
Avoidance
EXPORT A FLIGHT PLAN TO AN SD CARD
Procedures
5) To change the user waypoint name, follow the procedure for modifying a user
waypoint.
Flight
Planning
4) Press the LD WPT Softkey. The selected waypoint is inserted at the selected
point. The default user waypoint naming is USR000, USR001, USR002, and
so on.
GPS Nav
3) The default insertion point is at the end of the flight plan. If the selected
waypoint is to be placed anywhere other than the end of the flight plan,
press the FMS Knob to activate the cursor. Waypoints are inserted ABOVE
the cursor. Turn the large FMS Knob to select the desired insertion point.
AFCS
2) Press the Joystick to activate the map pointer. Use the Joystick to move
the pointer to the desired point on the map to be inserted as a waypoint in
the flight plan.
Nav/Com/
XPDR/Audio
1) Press the FPL Key to display the Active Flight Plan Page on the MFD.
1) Insert the SD card into the top card slot on the MFD.
Abnormal
Operation
3) Turn the small FMS Knob to select the Flight Plan Catalog Page.
Additional
Features
2) Press the FPL Key on the Contol Unit to display the Active Flight Plan Page
on the MFD.
4) Press the FMS Knob to activate the cursor.
5) Turn the large FMS Knob to highlight the flight plan to be exported.
Annun/
Alerts
6) Press the EXPORT Softkey.
7) Press the ENT Key to confirm the export.
Appendix
Index
190-00748-02 Rev. D
Garmin G1000 Cockpit Reference Guide for the Cessna Caravan
35