Download Garmin Software Version 0720.13 Cockpit Reference Guide

MISCELLANEOUS MESSAGE ADVISORIES (CONT.)
Message
NO WGS84 WPT – Non WGS 84
waypoint for navigation -[xxxx]
TRAFFIC FAIL – Traffic device has
failed.
FAILED PATH – A data path has
failed.
MAG VAR WARN – Large magnetic
variance. Verify all course angles.
SVS – SVS DISABLED: Out of
available terrain region.
SVS – SVS DISABLED: Terrain DB
resolution too low.
SCHEDULER [#] – <message>.
CHECK CRS – Database course for
LOC1 / [LOC ID] is [CRS]°.
CHECK CRS – Database course for
LOC2 / [LOC ID] is [CRS]°.
Comments
The position of the selected waypoint [xxxx]
is not calculated based on the WGS84 map
reference datum and may be positioned in
error as displayed. Do not use GPS to navigate
to the selected non-WGS84 waypoint.
The system is no longer receiving data from
the traffic system. The traffic device should be
serviced.
A data path connected to the GDU, GSD 41, or
the GIA 63/W has failed.
The GDU’s internal model cannot determine
the exact magnetic variance for geographic
locations near the magnetic poles. Displayed
magnetic course angles may differ from the
actual magnetic heading by more than 2°.
Synthetic Vision is disabled because the aircraft
is not within the boundaries of the installed
terrain database.
Synthetic Vision is disabled because a terrain
database of sufficient resolution (9 arc-second
or better) is not currently installed.
Message criteria entered by the user.
Selected course for LOC1 differs from published
localizer course by more than 10 degrees.
Selected course for LOC2 differs from published
localizer course by more than 10 degrees.
Index
Appendix
Annun/
Alerts
Abnormal
Operation
Additional
Features
Hazard
Avoidance
Procedures
Flight
Planning
GPS Nav
AFCS
Nav/Com/
XPDR/Audio
EICAS
Flight
Instruments
Annunciations & Alerts
86
Garmin G1000 Cockpit Reference Guide for the Piper PA-46 Meridian
190-00764-03 Rev. C