1
Download Garmin Software Version 0720.10 Cockpit Reference Guide
Transcript
Procedures Flight Instruments 4) Turn the large FMS Knob to highlight the desired arrival. 5) Press the ENT Key. A list of transitions is displayed for the selected arrival. 6) Turn either FMS Knob to select the desired transition. EICAS 7) Press the ENT Key. A list of runways may be displayed for the selected arrival. Nav/Com/ XPDR/Audio 8) Turn the large FMS Knob to highlight the desired runway. 9) Press the ENT Key. 10) With ‘LOAD?’ highlighted, press the ENT Key. Activate An Arrival Leg 1) Press the FPL Key to display the active flight plan. 2) Press the FMS Knob to activate the cursor. Flight Planning GPS Nav AFCS 11) The arrival becomes part of the active flight plan. 4) Select the ACT LEG Softkey. A confirmation window showing the selected leg is displayed. 5) With ‘ACTIVATE’ highlighted, press the ENT Key. Load and/or Activate an Approach Procedure Additional Features Hazard Avoidance Procedures 3) Turn the large FMS Knob to highlight the TO waypoint of the desired leg within the arrival. Abnormal Operation NOTE: If certain GPS parameters (WAAS, RAIM, etc.) are not available, some published approach procedures for the desired airport may not be displayed in the list of available approaches. 1) Press the PROC Key. Annun/ Alerts 2) Turn the large FMS Knob to highlight ‘SELECT APPROACH’. 3) Press the ENT Key. A list of available approaches for the destination airport is displayed. Appendix 4) Turn either FMS Knob to highlight the desired approach. Index 5) Press the ENT Key. A list of available transitions for the selected approach procedure is now displayed. 36 G1000 Cockpit Reference Guide for the Piper PA-46 Mirage/Matrix 190-01107-00 Rev. A
