Download Garmin Software Version 0552.22 Cockpit Reference Guide

Transcript
Additional Features
Flight
Instruments
7) Press the ENT Key. The Export Log Window is displayed and the ‘OK’
Button is highlighted.
EIS
8) Press the ENT Key. A .csv file is copied to the SD Card in top card slot of
the MFD.
Nav/Com/
XPDR/Audio
Delete All Logs From a Selected Folder
1) While viewing the Maintenance Logs Page, press the FMS Knob to activate
the cursor.
2) Turn the large FMS Knob to display the list of available folders.
AFCS
3) Turn either FMS Knob to select the desired folder.
4) Press the ENT Key.
GPS Nav
5) Press the MENU Key to display the Page Menu.
6) Turn either FMS Knob to highlight ‘Delete All Logs In Folder’.
Flight
Planning
7) Press the ENT Key. The Confirmation Window is displayed.
8) With ‘YES’ highlighted, press the ENT Key.
Procedures
Delete All Logs From Internal Memory
2) Turn either FMS Knob to highlight ‘Delete All Logs’.
3) Press the ENT Key. The Confirmation Window is displayed.
SCHEDULER
The Scheduler feature can be used to enter and display reminder messages (e.g.,
Change Oil, Switch Fuel Tanks, or Altimeter-Transponder Check) in the Alerts
Window on the PFD. Messages can be set to display based on a specific date and time
(event), once the message timer reaches zero (one-time; default setting), or recurrently
whenever the message timer reaches zero (periodic). Message timers set to periodic
alerting automatically reset to the original timer value once the message is displayed.
When power is cycled, all messages are retained until deleted, and message timer
countdown is resumed.
Index
Appendix
Annun/
Alerts
Abnormal
Operation
Additional
Features
Hazard
Avoidance
1) While viewing the Maintenance Logs Page, press the MENU Key to display
the Page Menu.
72
Garmin G1000 Cockpit Reference Guide for the Quest KODIAK™ 100
190-00645-07 Rev. A