Download Garmin Software Version 0552.00 Cockpit Reference Guide

SECTION 10 – HAZARD
AVOIDANCE
10.5 SKYWATCH TRAFFIC ADVISORY
SYSTEM (TAS)(OPTIONAL)
Traffic Advisory,
aircraft is 400’ below
Traffic Mode Altitude Mode
& climbing
Traffic, Out of
Range
Refer to the SkyWatch pilot’s guide for a detailed
discussion of the SkyWatch system.
Displaying Traffic on the Traffic Map Page
1)
Turn the large FMS Knob to select the Map
Page Group.
2)
Turn the small FMS Knob to select the Traffic
Map Page.
3)
Press the OPERATE Softkey to begin displaying
traffic. ‘TAS OPERATING’ is displayed in the
Traffic mode field.
4)
Press the ALT MODE Softkey to change the
altitude volume. Select the desired altitude
volume by pressing the the BELOW, NORMAL,
ABOVE, or UREST (unrestricted) Softkey. The
selection is displayed in the Altitude mode
field.
5)
6)
10-8
Press the STANDBY Softkey to place the system
in the Standby mode. ‘TAS STANDBY’ will be
displayed in the Traffic mode field.
Rotate the Joystick clockwise to display a larger
area or rotate counter-clockwise to display a
smaller area.
“Non-Bearing” Traffic (system
is unable to determine bearing),
distance is 8.0 nm, 1190’ above
and descending
Proximity Traffic,
1000’ above &
descending
Figure 10-12 Traffic Map Page
Displaying Traffic on the Navigation Map
1)
Ensure the SkyWatch system is operating. With
the Navigation Map displayed, press the MAP
Softkey.
2)
Press the TRAFFIC Softkey. Traffic will now be
displayed on the map.
Garmin G1000 Cockpit Reference Guide for the Quest Kodiak 100
190-00645-00 Rev. A