Download Garmin Software Version 0370.14 Cockpit Reference Guide
Transcript
SECTION 7 – NAVIGATION SECTION 7: NAVIGATION The following discussions pertain to the Multi Function Display, unless otherwise indicated. 7.1 NAVIGATION MAP PAGE 7.2 DIRECT-TO NAVIGATION Direct-to Navigation from the MFD Identifier Facility Name City Symbol Nearest Airport Flight Plan Field Select the MAP Page Group Map Orientation 1) Turn the large FMS Knob until ‘MAP’ is highlighted in the Page Group Box in the lower right of the MFD display. 2) Turn the small FMS Knob to select the first MAP page (indicated by a solid rectangular icon). 3) Press the MAP Softkey to display softkeys for the available information which may be displayed on the map. WARNING: The map display should only be used for situational awareness. Any map display indication should be compared with approved navigation sources. Map of the Selected Waypoint Map Range Region Latitude/ Longitude Activate Field Bearing Distance Direct-to Course Figure 7-2 MFD Direct-to Window Enter a Direct-to Destination 1) Press the Direct-to ( 2) Turn the small FMS Knob to enter the first letter of the destination waypoint identifier. Turn the large FMS Knob to the right to move the cursor to the next character position. 3) Repeat step 2 to spell out the rest of the waypoint identifier. 4) Press the ENT Key to confirm the identifier. The ‘Activate?’ field is highlighted. 5) Press the ENT Key to activate. ) Key. Select a Direct-to Destination to a Flight Plan Waypoint or Nearest Airport Figure 7-1 Navigation Map Page 1) While navigating an active flight plan, press the Direct-to ( ) Key. 2) Turn the large FMS Knob to highlight the ‘FPL/ NRST WAYPOINT’ field. Garmin G1000 Cockpit Reference Guide for the DA42 7-1