Download Garmin Software Version 0369.13 Cockpit Reference Guide

SECTION 10 – HAZARD
AVOIDANCE
10.4 TRAFFIC INFORMATION SERVICE (TIS)
Traffic Advisory, aircraft is 1200’
TNA Mute above & climbing, moving in the Traffic out of
direction of the line
Traffic Mode Status
range
NOTE: Traffic Information Service (TIS) is only
available when the aircraft is within the service
volume of a TIS capable terminal radar site.
Displaying Traffic on the Traffic Map Page
1) Turn the large FMS Knob to select the Map Page
Group.
2) Turn the small FMS Knob to select the second
rectangular page icon.
3) Press the OPERATE Softkey to begin displaying
traffic. ‘OPERATING’ is displayed in the Traffic Mode
field.
4) Press the STANDBY Softkey to place the system in
the Standby mode. ‘STANDBY’ will be displayed in
the Traffic Mode field.
5) Rotate the Joystick clockwise to display a larger
area or rotate counter-clockwise to display a smaller
area.
If data is not received for a period longer than 6
seconds, the age of the present data will be displayed in
the lower left of the screen along with the annunciation
that the system has entered Coast mode. The system
will maintain the traffic display (up to 60 seconds) until
the next data reception. If no data is received after 60
seconds, traffic will be removed from the display.
190-00324-07 Rev. A
Last data update Traffic at same altitude, ProximityTraffic 1200’ above
is older than 6 level flight & moving in the & descending, moving in the
sec. resulting in
direction of the line
direction of the line
Coast Mode
Figure 10-11 Traffic Map Page
Displaying Traffic on the Navigation Map
1) Ensure TIS is operating. With the Navigation Map
displayed, press the MAP Softkey.
2) Press the TRAFFIC Softkey. Traffic will now be
displayed on the map.
TIS Audio Alert
When a Traffic Advisory (TA) is displayed, an audio
alert “Traffic” is given.
“Traffic Not Available” will be heard whenever TIS
service becomes unavailable.
Garmin G1000 Cockpit Reference Guide for the DA40/40F
10-7