Download FUNAI CSV20PFD Owner's Manual

MAINTENANCE
CABINET CLEANING
SERVICING
• Wipe the front panel and other exterior surfaces of
• Should your unit become inoperative, do not try to
•
correct the problem by yourself. There are no userserviceable parts inside. Turn off, unplug the power
cord and please call our help line mentioned on
the front page, to locate an Authorized Service
Center.
the unit with a soft cloth immersed in lukewarm
water and wrung dry.
Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may
cause damage and discoloration to the exposed surfaces.
IF THE LASER OPTICAL PICKUP UNIT IS DIRTY
• If the unit still does not perform properly when it is operated, while referring to the relevant sections and to
“TROUBLESHOOTING GUIDE” in this Owner’s Manual, the laser optical pickup unit may be dirty.
Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup
unit.
DISC HANDLING
• Handle the discs so that fingerprints and dust do
• To clean-off, use a soft cloth.
• Do not use a hard cloth since this will mar the disc.
• Wipe the disc in a straight line from center to edge.
• Never wipe with a circular motion.
• Do not use detergent or abrasive cleaning agents.
not adhere to the surfaces of the discs.
• Always store the disc in its protective case when it
is not used.
- 32 -
EN