Download Fujitsu SCA.1 User's Manual

SCA.1, SCA. 2 INTERFACE CONNECTOR
240 SERIES (SCA)
■
FEATURES
• Half pitch connector conformed to SCA system (80
pins).
• Add mating guide and ESD protection to do plug-in
safety and reliability (They are newly added on SCA.
2CN).
• Hot-plugging. Ground contacts mate first before other
contacts mate when engagement is done (conforms to
SCA.2 specification).
• To prevent pin-bending, bellows contacts are used.
• Plug: 2 types are available.
1) The center of a SMT plug mates the center of a PCB.
2) 0.9 mm (0.035 in.) off-set from center
■
■
SPECIFICATIONS
Item
Specifications
MATERIALS
Item
Materials
Operating temperature range
–55°C to +105°C
Insulator
Polyester (UL94V-0)
Current rating
DC 1 A
Conductor
Copper alloy
Voltage rating
AC 240 V
Contact resistance
40 mΩ max. (DC 6 V, 0.1 A)
Insulation resistance
1000 MΩ min. (DC 500 V)
Dielectric withstand voltage)
AC 750 V for 1 minute
Plating
Contact
Gold plating
Terminal
Palladium plating
1
240 Series (SCA.1)
PLUG, SMT [0.9 mm (0.035 in.) OFFSET]
DIMENSIONS
#1
#41
1.0 (0.039)
10.0
(0.393)
4.0 (0.157)
12.0 (0.472)
12.70 (0.500)
#80
0.76±0.05
(0.029±0.001)
57.92±0.05 (2.280±0.001)
R0
.63
5(
1.27 (0.050) 0.025
0.06
2)
R1
.6 (
49.53±0.1 (1.950±0.004)
1.27±0.05 (0.050±0.001)
24.765 (0.975)
1.52±0.05 (0.059±0.001)
R
1.27±0.05 (0.050±0.001 )
#40
3.70 (0.145)
1.52±0.05 (0.059±0.001)
52.15 (2.446)
58.00 (2.283)
49.53 (1.950)
0.9 (0.035)
7.0 (0.275)
■ PC BOARD MOUNTING PATTERN
3.50±0.1 (0.137±0.004)
1.52±0.1 (0.059±0.004)
3.70±0.1 (0.145±0.004)
■
)
1.27 (0.050)
Recommended PCB Thickness 1.0 ± 0.1 mm
49.53 (1.950)
52.00 (2.047)
Unit: mm (in.)
■ PART NUMBER
Unit: mm (in.)
FCN-248Q080-L/CS
PLUG, SMT (STRADDLE MOUNT)
■
52.15 (2.446)
58.00 (2.283)
49.53 (1.950)
1.27±0.05 (0.050±0.001 )
#40
#1
0.9 (0.035)
7.0 (0.275)
DIMENSIONS
#41
1.0 (0.039)
10.0
(0.393)
4.0 (0.157)
12.0 (0.472)
12.70 (0.500)
#80
.6 (
0.06
2)
R0
.63
5(
1.27 (0.050) 0.025
)
R1
1.27 (0.050)
49.53 (1.950)
52.00 (2.047)
Unit: mm (in.)
FCN-248Q080-L/BS
49.53±0.1 (1.950±0.004)
1.27±0.05 (0.050±0.001)
24.765 (0.975)
±0.05
1.52±0.05 (0.059±0.001)
R
0.76
(0.029±0.001)
■ PART NUMBER
57.92±0.05 (2.280±0.001)
3.50±0.1 (0.137±0.004)
1.52±0.1 (0.059±0.004)
3.70±0.1 (0.145±0.004)
3.70 (0.145)
1.52±0.05 (0.059±0.001)
■ PC BOARD MOUNTING PATTERN
Recommended PCB Thickness 1.0 ± 0.1 mm
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
2
240 Series (SCA.1)
SOCKET, VERTICAL MOUNT
■
DIMENSIONS
#1
#80
6.59
(0.255)
9.85
(0.387)
#41
Hold on bar
0.50
(0.019)
0.30
(0.011)
2.90
(0.114)
2.69
(0.105)
Housing
#40
7.10
(0.279)
62.15 (2.446)
55.07 (2.168)
49.53 (1.950)
0.30
(0.011)
58.51 (2.031)
Unit: mm (in.)
1.905 (0.075)
0.952 (0.037)
2.20±0.1 (0.086±0.004)
■ PC BOARD LAYOUT
59.51 (2.031)
#40
#39
#2
#1
0.80±0.1
(0.031±0.004)
#79
#80
2.60±0.1
(0.102±0.004)
#41
2.60 ±0.1
(0.10
2.60±0.1
(0.102±0.004)
2 ±0.004
)
#42
2.70±0.1
(0.106±0.004)
Unit: mm (in.)
■ PART NUMBER
FCN-244B080-G/AS
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
3
240 Series (GBIC)
PLUG, SMT (STRADDLE MOUNT), 20 PIN
■
DIMENSIONS
11.43 (0.45)
1.27(0.05)
#10
5.0 (0.197)
7.0 (0.276)
27.38 (1.078)
23.03 (0.907)
19.77 (0.778)
#1
10
1
20
FT
#11
#20
0.50 (0.019)
12.70(0.5)
6.72(0.264)
R
0.6 Retention leg
35
(0
.02
5)
1.27(0.05)
)
29
.6
(0
60
1.
R
3.55(0.149)
1.0(0.004)
1.0(0.004)
A
A
1.27(0.05)
0.635(0.025)
1.52(0.060)
13.12(0.517) 9.25(0.364)
26.24 (1.033)
Unit: mm (in.)
■ PC BOARD LAYOUT
23.06 (0.908)
0.81±0.03 (0.032±0.001)
TYP
1.52(0.060)
TYP
4.22(0.166)
TYP
1.31(0.052)
0.05 S W
V
2.33(0.092)
2.53(0.099)
3.19(0.126)
19.87±0.2 (0.782±0.008)
TYP
0.81±0.03 (0.032±0.001)
0.7 )
R .028
(0
0.28(0.011)
1.37±0.05
(0.908±0.002)
0.05 S W
2.60±0.4(0.102±0.016)
0.81±0.03 (0.032±0.001)
TYP
1.52 (0.060)
1.27(0.05)
3.50(0.138)
0.05 S W
0.05 S W
2 PLC
Recommended PCB Thickness 1.0 ± 0.1 mm
Unit: mm (in.)
■ PART NUMBER
FCN-248Q020-L/ES
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
4
240 Series (SCA.2)
PLUG, SMT [0.9 mm (0.035 in.) OFFSET] SCA.2
P/
N
FC
1.27±0.05 (0.050±0.001 )
#40
#1
#41
R1
.6 (
)
co
.93 (0.036)
S
nt
49.53±0.1 (1.950±0.004)
1.52±0.05 (0. 059±0.001)
6.72
(0.264)
.63
5(
1.27 (0.050) 0.025
61.67±0.1 (2.427±0.004)
0.81±0.05 (0.031±0.001)
0.81±0.05 (0.031±0.001)
1.27±0.5 (0.050±0.001)
4.22±0.05
(0.166±0.001)
58.17±0.1 (2.290±0.004)
■ PART NUMBER
inu
1.37±0.5
(0.053±0.001)
R
1.52±0.05 (0. 059±0.001)
08
be
0-L
en
/D
R0
1.27 (0.050)
■ PC BOARD LAYOUT
8Q
3.65
(0.139)
0.06
2)
dis
49.53 (1.950)
52.00 (2.047)
58.87 (2.278)
65.36 (2.573)
24
1.0
(0.039)
10.0
(0.393)
4.0
12.0 (0.472) (0.157)
12.70 (0.500)
#80
N-
3.50±0.1 (0. 137±0.004)
66.50 (2.618)
52.15 (2.446)
58.00 (2.283)
49.53 (1.950)
1.52±0.1 (0.059±0.004)
0.28±0.1 (0.011±0.004)
3.00±0.1 (0.118±0.004)
DIMENSIONS
0.9 (0.035)
7.0 (0.275)
■
3.70±0.5
(0.145±0.001)
Recommended PCB Thickness 1.0 ± 0.1 mm Unit: mm (in.)
FCN-248Q080-L/DS
Unit: mm (in.)
ha
s
ed
PLUG, SMT (STRADDLE MOUNT) SCA.2
■ DIMENSIONS
0.9 (0.035)
7.0 (0.275)
66.50 (2.618)
52.15 (2.446)
58.00 (2.283)
49.53 (1.950)
1.27±0.05 (0.050±0.001 )
#40
#1
#41
.6 (
R1
1.27 (0.050)
6.72
(0.264)
3.65
(0.139)
0.06
2)
1.0
(0.039)
10.0
(0.393)
4.0
12.0 (0.472) (0.157)
12.70 (0.500)
#80
R0
.63
5(
1.27 (0.050) 0.025
)
49.53 (1.950)
52.00 (2.047)
58.87 (2.278)
65.36 (2.573)
.95
(0.039)
Unit: mm (in.)
■ PC BOARD LAYOUT
3.50±0.1 (0. 137±0.004)
1.37±0.5
(0.053±0.001)
0.81±0.05 (0.031±0.001)
0.81±0.05 (0.031±0.001)
1.27±0.5 (0.050±0.001)
58.17±0.1 (2.290±0.004)
Specifications
subject to change
4.22±0.05
(0.166±0.001)
1.52±0.1 (0.059±0.004)
0.28±0.1 (0.011±0.004)
3.00±0.1 (0.118±0.004)
49.53±0.1 (1.950±0.004)
R
1.52±0.05 (0. 059±0.001)
1.52±0.05 (0. 059±0.001)
61.67±0.1 (2.427±0.004)
Recommended
PCB Thickness
1.0 ± 0.1 mm
■ PART NUMBER
FCN-248Q080-L/ES
Unit: mm (in.)
3.70±0.5
(0.145±0.001)
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
5
240 Series FC-AL
PLUG, SMT (STRADDLE MOUNT) FIBER CHANNEL
■
DIMENSIONS
41.10 (1.618)
32.47 (1.278)
29.87 (1.176)
5.0±0.15
(1.197±0.006)
7.0 (0.276)
25.77 (1.015)
24.13 (0.95)
1.27 (0.05)
#20
#1
20
1
40
21
#21
#40
6
(0
.6
3)
3.65
(0.139)
6.72
(0.264)
1.0 (0.039)
10.0 (0.394)
4.0 (0.157)
12.0 (0.472)
12.7 (0.5)
10.0 (0.394)
ESD contact
R
1.
1.27 (0.05)
.95
(0.039)
.63
R0
1.27±0.3 (0.05±0.012)
24.13±04 (0.95±0.016)
26.60 (1.047)
32.47 (1.278)
39.96±04 (1.562±0.016)
)
.25
5(0
Unit: mm (in.)
24.13±0.1 (0.95±0.004)
0.81±0.05 (0.032±0.002)
0.81±0.05
(0.032±0.002)
#20
1.27±0.05
(0.05±0.002)
7 )
0. 8
R 0.02
(
Recommended
PCB Thickness
1.0 ± 0.1 mm
■ PART NUMBER
FCN-248Q040-L/ES
Unit: mm (in.)
#1
4.22±0.05
(1.66±0.002)
Specifications
subject to change
1.37±0.05
(0.054±0.002)
2.60±0.05 (0.102±0.002)
36.27±0.1 (1.428±0.004)
3.50±0.1 (1.38±0.004)
1.52±0.1 (0.60±0.004)
0.28±0.1 (0.011±0.004)
1.52±0.05 (0.60±0.002)
1.52±0.05 (0.60±0.002)
■ PC BOARD LAYOUT
3.70±0.05
(0.146±0.002)
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
6
248Q Series SCA.2
SINGLE SIDE SMT SCA.2
■ DIMENSIONS
54.2 (2.134)
57.87 (2.278)
66.5 (2.618)
7.0
(0.276)
1.27 (0.05)
Pos
No.1
To initial point of contact
1.85±0.25
(0.073±0.001)
5.0
(0.197)
55.27 (2.176)
49.53 (1.95)
Pos/2
8.8
(0.346)
Pos/2+1
66.4(2.614)
To initial point of contact
X
Retention Leg
13.8
(0.543)
2.65±0.15
(0.104±0.006)
2.65±0.15
(0.104±0.006)
1
(0.040)
50.165 (1.975)
58.765 (2.314)
61.1 (2.406)
64.7 (2.547) Retention leg pitch
Signal contact
ø1.55 +0
-0.05
(ø0.061 +0 )
4.3 - 0.002
(0.169)
8.8(0.346)
8.2(0.322)
0.635
(0.025)
0.20 (0.008)
0.2 A
X
-A-
2.1
(0.083)
2.0±0.25 (0.079±0.001)
5.9 (0.232)
To initial point of contact
6.6 (0.256)
1.6
(0.063)
(0.060)
1.5
2.5
(0.098)
1 (0.040)
2.2(0.087)
2.96(0.117)
18.2 (0.717)
Insulator
Unit: mm (in.)
X-X(5/1)
Sect. X-X
■ PC BOARD LAYOUT
±0.
)
1.6
002
2-ø 63±0.
0.0
(2-ø
4.3
(0.169)
4.7±0.1
(0.185±0.004)
64.7±0.05 (2.547±0.002)
58.765±0.05 (2.314±0.0002)
0.635 x 79= 50.165
(0.025 x 3.110 = 1.975) 0.635
2.2±0.1
(0.0887±0.004)
05
(4 4-ø
Th ø0. 1.2
ro 047 ±0.
ug ± 05
h 0.0
ho 02
le )
No. 80
No. 40
0.1 B
+0
80-0.42 -0.05
No.41
No. 1
(80-0.017 +0
)
- 0.002
Recommended PC Board
mounting dimensions
Thickness 1.0±0.1mm (0.040±0.004)
2.0±0.1
(0.079±0.004)
2.65±0.05
(0.104±0.002)
2.65±0.05
(0.104±0.002)
(0.025)
-B-
Unit: mm (in.)
■ PART NUMBER
FCN-248Q080-L/FS
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
7
240 Series FC-AL
SOCKET, VERTICAL MOUNT FIBER CHANNEL
■
DIMENSIONS
43.60±0.4 (0.716±0.016)
41.40 (0.630)
A
5.30±0.15 (0.209±0.006)
7.10±0.3 (0.280±0.012)
37.40 (1.472)
34.40 (1.354)
29.67 (1.090)
26.03 (1.025)
24.13±0.3 (0.95±0.012)
1.27±0.2
(0.05±0.008)
A
20
1
FT
40
15
B
1.27±0.3 (0.05±0.008)
24.13±0.4 (0.95±0.016)
34.11±0.4 (1.343±0.016)
2.70±0.3
(0.106±0.012)
2.79±0.2
(0.109±0.008)
1.70 (0.067)
9.85±0.3
(0.388±0.012)
11.50±0.3
(0.453±0.012)
2.20 (0.086)
1.45
(0.057)
3.50
(0.138)
B
6.50
(0.256)
°
31.60 (1.244)
Unit: mm (in.)
ESD contact
RECOMMENDED PWB
THICKNESS
PART NUMBER
SIGNAL CONTACT
POST LENGTH (A)
ESD CONTACT
POST LENGTH (B)
PT : 0.8 mm
FCN-244B040-L/CS
1.88 (0.074)
1.88 (0.074)
PT : 1.6 mm
FCN-244B040-L/BS
2.79 (0.110)
2.70 (0.106)
PT : 2.0 mm
FCN-244B040-L/DS
3.12 (0.123)
3.12 (0.123)
PT : 2.4 mm
FCN-244B040-L/ES
3.14 (0.124)
3.45 (0.136)
PT : 3.2 mm
FCN-244B040-L/FS
4.06 (0.160)
4.27 (0.168)
1.905 (0.075)
0.952 (0.037)
2.20±0.1(0.086±0.004)
■ PC BOARD MOUNTING PATTERN
34.11(1.343)
4.99
(0.196)
1.27 (0.05)
#19
#1
2.60±0.1
(0.102±0.004)
#20
#2
#22
2.70±0.1
(0.106±0.004)
#21
#39
Ø 0.80±0.8
(Ø 0.031±0.003)
#40
Ø 2.60±0.1
(Ø 0.102±0.004)
Ø 2.60±0.1
(Ø 0.102±0.004)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
8
240 Series (SCA.2)
SOCKET, VERTICAL MOUNT
■
DIMENSIONS
69.00 (2.71)
62.80 (2.47)
59.80 (2.35)
5.30 (0.208)
7.10 (0.280)
55.07 (2.17)
51.80 (2.039)
49.53 (1.95)
1.27 (0.05)
49.53 (1.95)
(B)
(A)
1.27 (0.05)
11.50 (.457)
1.45 (.057)
6.50 (.256)
2.20 (.086)
9.85 (.388)
3.50 (.138)
57.00 (2.44)
Electrostatic Discharge
59.51 (2.44)
Unit: mm (in.)
RECOMMENDED PWB
THICKNESS
PART NUMBER
SIGNAL CONTACT
POST LENGTH (A)
ESD CONTACT
POST LENGTH (B)
PT : 0.8 mm
FCN-244B080-L/CS
1.88 (0.074)
1.88 (0.074)
PT : 1.6 mm
FCN-244B080-L/BS
2.79 (0.110)
2.70 (0.106)
PT : 2.0 mm
FCN-244B080-L/DS
3.12 (0.123)
3.12 (0.123)
PT : 2.4 mm
FCN-244B080-L/ES
3.14 (0.124)
3.45 (0.136)
PT : 3.2 mm
FCN-244B080-L/FS
4.06 (0.160)
4.27 (0.168)
1.905 (0.075)
0.952 (0.037)
2.20±0.1 (0.086±0.004)
■ PC BOARD MOUNTING PATTERN
59.51 (2.031)
#40
#39
#2
#1
(0.10 ±
2 0.004
)
#42
2.70±0.1
(0.106±0.004)
2.60±0.1
(0.102±0.004)
0.80±0.1
(0.031±0.004)
#79
#80
2.60±0.1
(0.102±0.004)
2.60 ±0.1
#41
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
9
240 Series (SCA.2)
Fujitsu Components
International
Headquarter
Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141-0022, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://us.fujitsu.com/components
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
www.fcal.fujitsu.com
© 2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America, Inc. or its affiliates do not warrant that the content of the
datatasheet is error free. In a continuing effort to improve our products, Fujitsu Components America, Inc. or its
affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2, 2007.
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
10