Download Fujitsu 560H User's Manual

MEMORY CARD CONNECTORS
(PCMCIA CONFORMABLE)
560H SERIES
■ FEATURES
• The connectors conform to the Japan Electronic Industry
Development Association (JEIDA) and Personal
Computer Memory Card International Association
(PCMCIA) standards Ver. 4.
• Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.).
Incorrect insertion is prevented. Hot system plugging is
possible (contact detection).
• Plugs have an easy-to-use ejection mechanism.
• Raised mounting type connectors (under which
components can be mounted) and low-profile connectors
are available.
• In addition to connectors for type I and type II cards, a
connector for type III cards has been provided.
• The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided
mounting are available.
■ PIN CONNECTOR (PLUG) CONTACT LENGTH
■ SPECIFICATIONS
Contact type
Specification
Item
Pin No.
Contact length
Operating temperature range
– 55°C to + 85°C
Power, ground pins 1, 17, 34, 35, 51, 68
Current rating
DC 0.5 A
Card detection pins
36, 67
3.5 mm (0.137 in.)
Voltage rating
AC 250 V
Other signal pins
Others
4.25 mm (0.167 in.)
Contact resistance
40 mΩ max (6 VDC, 0.1 A)
Insulation resistance
1000 MΩ min. (500 VDC)
Dielectric withstanding voltage
500 VAC for 1 minute
Insertion/withdrawal life
Industrial environment: 5,000 times
Office environment: 10,000 times
5.0 mm (0.196 in.)
■ MATERIALS
Specification
Item
Plug body: PPS resin UL94V-0
Insulating material
: 6T nylon (for type III card connector) UL94V-0
Ejector: Polyester
: PPS resin (for SMT and type III card connectors)
Specifications
subject to change
Conductor
Copper alloy
Plating
Contact: Gold over palladium over nickel
(PAGOS)
Terminal: Palladium
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
1
560H Series Connector Conforming to Ver. 4
■ ORDERING PART NUMBER [PLUG]
FCN-56 5 P 068-G / XC-V4
V4: Conforms to Ver.4
E4: Conforms to Ver.4 and anti-ESD
Specification
Plating G: Gold plating
Number of contacts: 68, 136
Body P: Plug
Pin type
4: Straight
5: Right-angle
8: SMT
560 series connector
Fujitsu connector
■ ORDERING PART NUMBER [SOCKET]
FCN-56 8 J 068-G / 0
Terminal type 0: PC board double-sided straddle type
B: PC board single-sided mounting type
Plating G: Gold plating
Number of contacts: 68
Body J: Socket
Pin type 8: SMT
560 series connector
Fujitsu connector
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
2
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGH HOLE TYPE (WITH NO EJECTOR, STANDARD TYPE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2)
2.42 (0.095)
4.25 (0.167)
3.5 (0.138)
35.2 (1.39)
1 (0.039)
11.2 (0.44)
2.5mm (0.098)
deep spot facing
41.91 (1.65)
1.27 (0.05)
2- ø 2.8 (0.110)
5 (0.197)
3.810 (0.15)
3 (0.118)
1.905 (0.075)
5.715 (0.225)
0.51 (0.02)
Part number: FCN-565P068-G/C-V4
59.7(2.35)
1.27 (0.05)
4 (0.157)
No.2
1.27 (0.05)
No.17
No.1
50.8 (2) ±0.1 (0.0039)
No.1
41.91 (1.65)
7 (0.276)
No.34
41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.3
No.51
1.905 (0.075) ±0.05 (0.0020)
3.810 (0.15) ±0.05 (0.0020)
5.715 (0.225) ±0.05 (0.0020)
No.68
No.35
Unit: mm (in.)
No.68
68- ø 1 (0.039)±0.05 (0.0020)
2- ø 2.8 (0.110)±0.1 (0.0039)
(Card insertion side)
• Models with a board lock (metal fitting for direct mounting) are also available. Part number: FCN-565P068-G/12-V4 (for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board)
FCN-565P068-G/08-V4 (for 1.0 mm (0.039 in.) thick PC board)
• Long-terminal models are also available.
Part number: FCN-565P068-G/13-V4 (4 mm (0.157 in.))
FCN-565P068-G/02-V4 (10 mm (0.394 in.))
• Models which support Type III are also available.
Part number: FCN-565P068-G/17-V4
FCN-565P068-G/18-V4 (with board lock, for 1.2 mm (0.047 in.) to 1.6 mm
(0.063 in.) thick PC board )
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, LOW-PROFILE TYPE))
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
42 (1.65)
24.9 (0.98)
12.2 (0.48)
)
3
(0.118)
1.51 (0.059)
2.5mm (0.098)
deep spot facing
1.27 (0.05)
11
(0.
1.905 (0.075)
1.27 (0.05) × (34-1) = 41.91 (1.65)
.8
3.810 (0.15)
50.8 (2)
4
(0.157)
ø2
3
(0.118)
2-
5.715 (0.225)
Part number: FCN-565P068-G/01-V4
3.6 (0.141)
58.7 (2.31)
1.27 (0.05)
1.27 (0.05) × (34-1) = 41.91 (1.65)
No.1
No.2
1.27 (0.05)
No.1
No.34
No.35
No.68
50.8 (2) ±0.1 (0.0039)
41.91(1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.3
No.68
1.905 (0.075) ±0.05 (0.0020)
3.810 (0.15) ±0.05 (0.0020)
68- ø 1 (0.039) ±0.05 (0.0020)
±0.05 (0.0020)
5.715 (0.225)
2- ø 2.8 (0.110)±0.1 (0.0039)
(Card insertion side)
Use M2.5 (0.098 in) nut and screws. Screw torque is 3.2 kg/cm.
In order to avoid damage to the connector, do not pull out the card at an angle.
Specifications
subject to change
Dimensions are in millimeters (inches)
Unit: mm (in.)
www.fcai.fujitsu.com
3
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TO BE MOUNTED ON
THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/F-V4
(2) M2.5 (0.098 in.)
thread nut
50.8 (2)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
2.42 (0.095)
35.2 (1.385)
1.27 (0.05)
11.2 (0.441)
7 (0.276)
2.5
(0.098)
1 (0.039)
5.715 (0.225)
3.810 (0.15)
1.905 (0.075)
0.51 (0.059)
59.7 (2.35)
<To be mounted on back of PC board>
50.8 (2) ±0.05 (0.0039)
1.27 (0.05) × (68/2-1) =
41.91 (1.65) ±0.1 (0.0039)
No.68
1.27 (0.05) ±0.05 (0.0020)
1.27 (0.05)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
No.68
No.51
4(0.157)
1.27 (0.05)
No.35
No.34
2- ø 2.8 (0.110)±0.1 (0.0039)
1.905 (0.075) ±0.05 (0.0020)
3.810 (0.15) ±0.05 (0.0020)
5.715 (0.225) ±0.05 (0.0020)
No.34
No.17
No.35
No.1
68- ø 1 (0.039)±0.05 (0.0020)
(Card insertion side)
No.1
• A model with no nuts buried is available. Part number: FCN-565P068-G/H-V4
Unit: mm (in.)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, RAISED MOUNTING
TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
ø
2.
2
59.7 (2.35)
(0
.0
86
50.8 (2)
11.2 (0.441)
6)
35.2 (1.385)
6 (0.236)
2.42 (0.095)
23 (0.118)
8 (0.315)
5.715 (0.225)
3.810 (0.15)
1.905 (0.075)
0.51 (0.059)
Part number: FCN-565P068-G/J-V4 (SUPPORTS TYPE I, II CARD)
Part number: FCN-565P068-G/J-4V (SUPPORTS TYPE I, II, III CARD)
4.5 (0.177)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
1.27 (0.05)
7 (0.276)
1.27 (0.05)
No.1
No.17
No.34
8.5
No.35
No.51
53.7 (2.114)
No.68
No.1
50.8 (2) ±0.1 (0.0039)
No.2
41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.3
No.68
1.905 (0.075) ±0.05 (0.0020)
3.810 (0.15)±0.05 (0.0020)
5.715 (0.225) ±0.05 (0.0020)
68- ø 1 (0.039)±0.05 (0.0020)
2- ø 2.8 (0.110)±0.1 (0.0039)
(Card insertion side)
• Applicable screw: Self-tapping screw M2.5 (0.098 in.) x 5 mm (0.197 in.) (for 1.6 mm (0.063 in.) thick PC board)
• A model mounted on bottom of a PC board is also available. Part number: FCN-565P068-G16-V4 (supports type I, II)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
Unit: mm (in.)
4
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, SUNK MOUNTING TYPE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/A-V4
50.8 (2)
1.27 (0.05) × (34–1) = 41.91 (1.65)
8
2.
1.27 (0.05)
2.42 (0.095)
11.2 (0.441)
)
10
.1
(0
5.715 (0.225)
3.810 (0.15)
1.905 (0.075)
2.5mm (0.098)
deep spot facing
50.8 (2) ±0.1 (0.0039)
59.7 (2.35)
1.27 (0.05) × (68/2-1) =
41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.1
6 (0.236)
No.34
1.27 (0.05)
3 (0.118)
1.27 (0.05) × (34–1) = 41.91 (1.65)
1.27 (0.05)
No.1
No.17
No.35
No.34
No.51
6.7 (0.264) ±0
ø
2-
4.5 (0.177)
35.2 (1.39)
3 (0.118)
No.68
No.35
1.905 (0.075) ±0.05 (0.0020)
68- ø 1 (0.039)±0.05 (0.0020)
3.810 (0.15) ±0.05 (0.0020)
2- ø 2.8 (0.110) ±0.1 (0.0039)
5.715 (0.225) ±0.05 (0.0020)
No.68
Unit: mm (in.)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TWO LAYER STACK TYPE)
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
59.7 (2.35)
No.34
No.68
No.34
No.1
No.68
No.35
1.905 (0.075) × (8-1)
= 13.335 (0.525) ±0.05 (0.0020)
11.2 (0.441)
No.35
4 (0.157)
3
(0.118)
50.8 (2)
No.1
11 (0.433)
35.2 (1.39)
2.42 (0.095)
7
7
(0.276) (0.276)
1.905 (0.075)
1.905 (0.075) × (8-1) = 13.335 (0.525)
Part number: FCN-565P136-G/0-V4
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65) ±0.1 (0.0039)
No.1
No.35
±0.05 (0.0020)
1.27 (0.05)
No.34
No.68
No.34
No.1
No.35
No.68
136- ø 1 (0.039)
±0.05 (0.0020)
2- ø 2.8 (0.110) ±0.1 (0.0039)
1.905 (0.075) ±0.05 (0.0020)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
5
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, WITH GUIDE )
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
2-
ø
2.
8
59.7 (2.35)
(0
2.5mm (0.098)
deep spot facing
50.8 (2)
.1
10
)
59 (2.32)
4 (0.157)
7 (0.276)
*A
83.38 (3.283)
5.715 (0.225)
3.810 (0.15)
1.905 (0.075)
0.51 (0.02)
35.2 (1.386)
11.2 (0.441)
7
3 (0.118) (0.276)
2.42 (0.095)
Part number: FCN-565P068-G/C34-V4
No.1
No.34
Unit: mm (in.)
No.35
No.68
*A 60.48 mm (2.381 in.) model is also available. FCN-565P068-G/C32-V4
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2) ±0.1 (0.0039)
No.1
1.27 (0.05) × (68/2-1)
= 41.91 (1.65) ±0.1 (0.0039)
No.34
1.27 (0.05) ±0.05 (0.0020)
2- ø 2.8 (0.110) ±0.1 (0.0039)
5.715 (0.225) ±0.05 (0.0020)
3.810 (0.15)
Specifications
subject to change
68- ø 1 (0.039) ±0.05 (0.0020)
±0.05 (0.0020)
1.905 (0.075) ±0.05 (0.0020)
No.35
Dimensions are in millimeters (inches)
Unit: mm (in.)
No.68
www.fcai.fujitsu.com
6
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/XC-V4 (Type I, II Card, Button color: Black)
Part number: FCN-565P068-G/XC-4V (Type I, II, III Card, Button color: Black)
Part number: FCN-565P068-G/PC-V4 (Type I, II Card, Button color: Beige)
ø
67.31 (2.65)
2.
8
59.7 (2.35)
(0
.1
10
2.5mm (0.098)
deep spot facing
50.8 (2)
)
36 (1.417)
40 (1.574)
3.5
(0.138)
5 (0.197)
4.25 (0.167)
11.2 (0.441)
35.2 (1.386)
34 (1.339)
.4
0)
83.38 (3.283)
8 (0.315)
1.905 (0.075)
0.51 (0.020)
3.810 (0.15)
5.715 (0.225)
3 (0.118) 7 (0.276)
2.42 (0.095)
2-
10 (0.394)
78.5 (3.091)
59 (2.323)
42 (1.654)
35.5 (1.398)
No.17 No.18
No.34
No.1
No.35
No.51
No.52
7 (0.276)
4 (0.157)
2.1 (0.083)
4.8 (0.189)
11 (0.433)
3.7 (0.146)
ø2
.8
(0.
11
R1
Unit: mm (in.)
No.68
A model with an FG accessory for ESD protection is also available. Specify part number FCN-565P068-G/C23-E4,
instead of FCN-565P068-G/XC-V4.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2) ±0.1 (0.0039)
41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.3
3.810 (0.15)
1.905 (0.075) ±0.05 (0.0020)
±0.05 (0.0020)
5.715 (0.225) ±0.05 (0.0020)
1
0.
)±
10
8
ø
4-
2.
1
0.
(
68- ø 1 (0.039)±0.05 (0.0020)
No.68
)
39
00
.
(0
2- ø 2.8 (0.110)±0.1 (0.0039)
40 (1.574) ±0.1 (0.0039)
No.1
No.2
34 (1.339) ±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
(Card insertion side)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
7
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/MC-V4 (Button color: Black)
Part number: FCN-565P068-G/C22-V4 (Button color: Beige)
ø
67.31 (2.65)
2.
8
(0
59.7 (2.35)
.1
10
2.5mm (0.098)
deep spot facing
50.8 (2)
)
36 (1.417)
8 (0.315)
40 (1.574)
5 (0.197)
83.38 (3.283)
3.7 (0.146) ø 2.8 (0.110)
4.25 (0.167)
11.2 (0.441)
3.5
(0.138)
34 (1.339)
35.2 (1.386)
0.51 (0.020)
3.810 (0.15)
1.905 (0.075)
5.715 (0.225)
3 (0.118)
2.42 (0.095)
27 (0.276)
.4
78.5 (3.091)
59 (2.323)
42 (1.654)
35.5 (1.398)
No.1
No.17 No.18
No.34
2.1 (0.083)
10 (0.394)
7 (0.276)
4.8 (0.189)
4 (0.157)
11 (0.433)
R1
Unit: mm (in.)
No.35
No.51
No.52
No.68
Models with an FG accessory ESD protection are also available. Specify part number FCN-565P068-G/KC-E4 instead of
FCN-565P068-G/MC-V4, or specify FCN-565P068-G/C33-E4 instead of FCN-565P068-G/C22-V4.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2) ±0.1 (0.0039)
41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.3
3.810 (0.15) ±0.05 (0.0020)
1.905 (0.075) ±0.05 (0.0020)
9)
03
No.68
.0
.1
(0
±0
)
10
.1
4-
ø
.8
(0
2
2- ø 2.8 (0.110) ±0.1 (0.0039)
68- ø 1 (0.039) ±0.05 (0.0020)
5.715 (0.225) ±0.05 (0.0020)
No.2
40 (1.574) ±0.1 (0.0039)
No.1
34 (1.339) ±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
(Card insertion side)
Specifications
subject to change
Dimensions are in millimeters (inches)
Unit: mm (in.)
www.fcai.fujitsu.com
8
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, TO BE
MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/XF-V4 (Button color: Black)
Part number: FCN-565P068-G/PF-V4 (Button color: Beige)
2.42 (0.095)
67.31 (2.65)
59.7 (2.35)
2.5mm (0.098)
deep spot facing
50.8 (2)
When a card is ejected
10 (0.394)
42 (1.654)
35.5 (1.398)
No.35
No.34
Unit: mm (in.)
7 (0.276)
4 (0.157)
78.5 (3.091)
59 (2.323)
No.68
3.7 (0.146) When a card is inserted
36 (1.417)
.4
R1
4.8 (0.189)
2.1 (0.083)
40 (1.574)
5 (0.197)
4.25 (0.167)
11.2 (0.441)
35.2 (1.386)
83.38 (3.283)
8 (0.315)
3.5
(0.138)
34 (1.339)
1 (0.039)
1.905 (0.075)
0.51 (0.020)
5.715 (0.225)
3.810 (0.15)
2.5
ø 2.8 (0.110)
7 (0.276)
No.1
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
■ MOUNTING EXAMPLE
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)±0.1 (0.0039)
No
1.27 (0.05) ±0.05 (0.0020)
No.35
00
20
)
1.905 (0.075) ±0.05 (0.0020)
0.0
3
9)
03
(0
)
-ø
10
.1
4-
ø
8
2.
(0
1(
.0
1
.
±0
No.1
Nut buried
40 (1.574) ±0.1 (0.0039)
9) ±0
.05
(0.
No.34
68
3.810 (0.15) ±0.05 (0.0020)
5.715 (0.225) ±0.05 (0.0020)
.68
34 (1.339) ±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
Unit: mm (in.)
Specifications
subject to change
Ejector button
Regardless of how the connector is mounted on the PC
board, a card can be inserted with its face upward.
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
9
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, SUNK
MOUNTING TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
67.31 (2.65)
59.7 (2.35)
50.8 (2)
35.2 (1.386)
R1
3.7 (0.146)
When a card is ejected
11 (0.433) When a card is inserted
5 (0.197)
.4
8
2.
ø
3 (0.118)
10 (0.394)
78.5 (3.091)
42 (1.654)
7 (0.276)
35.5 (1.398)
No.17
No.1
No.34
2.1 (0.083)
2.1
(0.083)
5 (0.197)
4.25 (0.167)
6 (0.236)
2.5 (0.098)
2- ø 2.8 (0.110)
34 (1.339)
3.5
(0.138)
11.2 (0.441)
8 (0.315)
4.5
(0.177)
2.42 (0.095)
3 (0.118)
83.38 (3.283)
5.715 (0.225)
3.810 (0.15)
1.905 (0.075)
0.51 (0.020)
Part number: FCN-565P068-G/W-V4
Unit: mm (in.)
No.35
No.51
No.68
2.5 (0.098)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
No.2
50.8 (2) ±0.1(0.0039)
41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.3
6.7 +0
No.1
5.715 (0.225) ±0.05 (0.0020)
2- ø 2.8 (0.110) ±0.1(0.0039)
3.810 (0.15) ±0.05 (0.0020)
1.905 (0.075) ±0.05 (0.0020)
No.68
68- ø 1 (0.039) ±0.05 (0.0020)
Unit: mm (in.)
(Card insertion side)
■ MOUNTING EXAMPLE
Nut
Mounting height
4.5mm(0.177in.)
Nut
M2.5 screw
The connector is mounted on a PC board so that only its terminal connection part rests on the board.
Specifications
subject to change
Dimensions are in millimeters (inches)
Unit: mm (in.)
www.fcai.fujitsu.com
10
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 4.5 MM
(0.177 IN.) RAISED TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
0.2 (0.0078)
5.2 (0.205) When a card is ejected
12.5 (0.492) When a card is inserted
3.5
(0.138)
5 (0.197)
4.25 (0.167)
11.2 (0.441)
35.2 (1.386)
2.42
(0.095)
76.48 (3.011)
81.88 (3.224)
1.905 (0.075)
)
ø 2.2 , 4.5 deep
87
8
(0.315)
50.8 (2)
.0
9 (0.354)
2
4.5 (0.177)
59.7 (2.35)
2.
3(0.118)
(0
0.51 (0.020)
ø
3.810 (0.15)
2-
5.715 (0.225)
Part number: FCN-565P068-G/J25-V4 (supports type I, II card)
Part number: FCN-565P068-G/J25-4V (supports type I, II, III card)
4.8 (0.189)
10 (0.394)
59 (2.323)
8 (0.315)
No.35
No.68
8.5 (0.335)
No.1
7
(0.276)
4.5 (0.177)
11.5 (0.453)
42 (1.654)
35.5 (1.398)
No.34
50.8 (2)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
+0
–0
33.78 (1.330)
–0
3.42 (0.135)
82.88 (3.263)
–0
71.88 (2.830)
61.7 (2.429)
±0.1
51.7 (2.035) +0
76.48 (3.011)
4 - ø 2.8 (0.110) ±0.1 (0.0039)
+0
No.68
68- ø 1 (0.0394) ±0.05 (0.0020)
–0
±0.05 (0.0020)
1.905 (0.075)
No.35
6.58 (0.259)
±0.05 (0.0020)
±0.05 (0.0020)
5.715 (0.225)
3.810 (0.15)
1.27 (0.05)
No.34
±0.05 (0.0020)
23.78 (0.936)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65) ±0.1 (0.0039)
41.7 (1.642) +0
50.8 (2)
±0.1 (0.0039)
61.7 (2.429)
■ MOUNTING EXAMPLE
–0
50.8 (2) ±0.1 (0.0039)
No.1
Unit: mm (in.)
8 (0.315)
Unit: mm (in.)
–0
• Components with a height of 4.3 mm (0.169 in.) maximum can
be installed under the connector.
• Use M2.5 mm (0.098 in.) x 5 mm (0.197in.) self-tapping screws
(when a 1.6 mm (0.063 in.) thick PC board is used) to mount
the connector to the board.
Component mounting is prohibited in the hatched areas.
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
11
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 5 mm
(0.197 in.) RAISED TYPE, WITH OR WITHOUT FG CLIP) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/0442-E4 (with FG clip)
0.2 (0.008)
8.07 (When a card is inserted)
40 (1.57)
42.81 (1.69)
12 (0.472)
No.35
No.68
22 (0.866) 34 (1.339)
57.51 (2.26)
5 (0.197)
8.5
(0.335)
No.35
22 (0.866)
9 (0.354)
1.2 (0.047)
9 (0.354)
12 (0.472)
5 (0.197)
R4
8.5
(0.335)
59.7 (2.35)
50.8 (2)
12.9
10 (0.394)
71.85 (2.83)
59 (2.32)
42 (1.654)
35.5 (1.398)
No.1
No.34
4.8 (0.189)
10 (0.394)
71.85 (2.83)
59 (2.32)
42 (1.654)
35.5 (1.398)
No.1
No.34
1.2 (0.047)
6 (0.236)
86.31 (3.40)
2.42
79.3 (3.12)
(0.095)
76.31 (3.00)
35.2 (1.386)
11.2 (0.441)
R4
12.9
4.8 (0.189)
5 (0.197)
5.715 (0.225)
2- ø 6 (0.236)
3.810 (0.150)
2- ø 4 (0.157)
2- ø 2.35 (0.0925) 1.905 (0.075)
0.51 (0.020)
8.07 (When a card is inserted)
40 (1.57)
42.81 (1.69)
0.77 (When a card is ejected)
6 (0.236)
7.8 (0.307)
3 (0.118)
0.77 (When a card is ejected)
0.2 (0.008)
59.7 (2.35)
50.8 (2)
86.31 (3.40)
79.3 (3.12)
76.31 (3.00)
35.2 (1.386)
11.2 (0.441)
2- ø 6 (0.236)
5.715 (0.225)
3.810 (0.150)
2- ø 4 (0.157)
2- ø 2.35 (0.0925) 1.905 (0.075)
0.51 (0.020)
2.42
(0.095)
5 (0.197)
2.8
2-R 2.6
ø
2-
2.8
2-R 2.6
ø
2-
3 (0.118)
Part number: FCN-565P068-G/0426-V4 (with no FG clip)
No.68
34 (1.339)
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
.1
(0
.0
03
9)
1.27 (0.05) ±0.05 (0.0020)
∗2.
.2
+0
.0
(0
9)
07
.2
+0 0
–
.0
(0
9)
07
7.8 (0.307)±0.1 (0.0039)
42.81 (1.69) ±0.1 (0.0039)
) ±0
3.42 (0.135) –0
38
–0
.1
6.58 (0.259)
–0
68- ø 1 (0.039) ±0.05 (0.0020)
2-
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65) ±0.1 (0.0039)
)
77
.1
(0
0
5
5) –
4.
.31
ø
8 (0
2- 2- ø
(0.
07
9) ±0
.1
(0.0
03
9)
∗2.
ø2
3.810 (0.150) ±0.05 (0.0020)
1.905 (0.075) ±0.05 (0.0020)
5.715 (0.225) ±0.05 (0.0020)
1.27 (0.05)
±0.05 (0.0020)
) –0
77
.1
(0
–0
5
15)
4.
0.3
ø
8 (
2- 2- ø
76.31 (3.0) ±0.1 (0.0039)
9)
(0
68- ø 1 (0.039) ±0.05 (0.0020)
03
5
1.905 (0.075) ±0.05 (0.0020)
.0
61.7 (2.43) –0
3.
3.810 (0.150) ±0.05 (0.0020)
(0
ø
5.715 (0.225) ±0.05 (0.0020
) ±0
2-
76.31 (3.0) ±0.1 (0.0039)
38
.1
–0
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (68/2–1)
= 41.91 (1.65) ±0.1 (0.0039)
.1
42.81 (1.69)
61.7 (2.43)
(0
±0.1 (0.0039)
5
–0
3.
3.42 (0.135)
ø
6.58 (0.259)
2-
34 (1.339)±0.1 (0.0039)
34 (1.339) ±0.1 (0.0039)
22 (0.866) ±0.1 (0.0039)
57.15 (2.25) ±0.1 (0.0039)
∗2. Component mounting is prohibited in the
hatched areas.
22 (0.866) ±0.1 (0.0039)
∗2. Component mounting is prohibited in the
hatched areas.
Unit: mm (in.)
• Use M3 mm (0.118 in.) x 5.5 mm (0.217 in.) thread self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is
used) to mount the connector to the board.
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
12
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, 4.5 mm (0.177 in.)
RAISED TYPE, WITH FG CLIP FOR ESD PROTECTION) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
0.2 (0.0079)
2.42 (0.0953)
59.7 (2.35)
50.8 (2)
.4
R1
ø 2.8 (0.110)
28.5 (1.12)
8 (0.315)
40 (1.57)
35.2 (1.385)
11.2 (0.441)
34 (1.34)
83.38 (3.28)
0.51 (0.020)
3.810 (0.150)
67.31 (2.65)
6)
86
.0
(0
1.905 (0.075)
3 (0.118)
2
2.
5.715 (0.225)
ø
2-
Part number: FCN-565P068-G/J38-E4
11.5 (0.453)
8 (0.315)
78.5 (3.09)
59 (2.32)
42 (1.65)
35.5 (1.40)
No.1
No.34
No.35
28.45 (1.12)
4.5 (0.177)
10 (0.394)
1.8 (0.071)
4.8 (0.189)
8.5 (0.335)
11 (0.433)
SMT•FG Clip
No.68
2 (0.079)
Unit: mm (in.)
• Models with a right-button ejector, and with or without an ESD/FG clip are also available. Contact Fujitsu.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65) ±0.1 (0.0039)
68- ø 1 (0.039)±0.05 (0.0020)
03
.0
1
0.
(0
±
)
10
.1
8
4-
ø
2.
(0
No.68
3 (0.118) ±0.1 (0.0039)
1.905 (0.075) ±0.05 (0.0020)
3.810 (0.150) ±0.05 (0.0020)
5.715 (0.225) ±0.05 (0.0020)
9)
No.35
34 (1.34) ±0.05 (0.002)
29.45
40 (1.57) ±0.1 (0.0039)
No.34
1.27 (0.05) ±0.05 (0.0020)
28.5 (1.12)
No.1
4 (0.157) ±0.1 (0.0039)
±0.1 (0.0039)
Unit: mm (in.)
67.31 (2.65)~68.0 (2.68)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
13
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT EJECTOR BUTTON, 5 mm (0.197 in.)
RAISED TYPE, WITH ESD CLIPS
■ DIMENSIONS
Part number: FCN-565P068-G/0221-E4
83.38 (3.28)
)
φ
40 (1.57)
8
2.
10
(.1
35.2 (1.39)
11.2 (.441)
10
(.1
11
(.433)
2
1.8
(.071)
40 (1.574)
1 (.039)
7
4.8 (0.189)
No. 35
5 (.197)
10.5 (.413)
(.276) (.276)
7
42 (1.65)
35.5 (1.398)
No. 1
11 (.433)
8 (.315)
3 (0.118)
51.7 (2.04)
78.5 (3.09)
59 (2.32)
10 (.394)
R1.4
1 (.039)
No. 68
No. 34
67.31 (2.65)
59.7 (2.35)
50.8 (2.00)
34 (1.34)
)
φ
.8
0.51(0.020)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
40±0.1 (1.57±.002)
6-0 (.236-0)
9.5-0 (.347-0)
34±0.05 (1.33±0.002)
67.31+0.2 (2.65 +0.008)
75-0 (2.95-0)
61.7-0 (2.429-0)
51.7+0 (2.035+0)
Note 3
1.27±0.05 (0.05±0.002)
1.27 x (68/2-1) = 41.91±0.1 (1.65±0.004)
50.08±0.1 (2.00±0.004)
4.4-0 (.173-0)
5-0(.197-0)
PCB Foot Print Viewed
from Connector Side
NOTE 2
COMPONENT CON NOT BE
MOUNTED IN THIS AREA
NOTE 3
COMPONENTS THAT HAVE
5mm HEIGHT CAN BE
MOUNTED IN THIS AREA
NOTE 4
UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE ±0.5mm (0.002 in.)
1.905±0.05 (.075±0.002)
-φ
5
.0
±0
1
5.715±0.05 (.225±0.002)
68
3.810±0.05 (.150±0.002)
Note 2
02
.0
±0
39
(.0
Unit: mm (in.)
)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
14
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, 5 mm (0.197 in.)
RAISED TYPE, WITH ESD CLIPS
■ DIMENSIONS
Part number: FCN-565P068-G/0231-E4
1 (.039)
11 (.433)
8 (.315)
10.5 (.413)
40 (1.574)
No. 35
51.7 (2.04)
42 (1.65)
35.5 (1.398)
No. 34
No. 1
78.5 (3.09)
59 (2.32)
67.31 (2.65)
59.7 (2.35)
50.8 (2.00)
34 (1.34)
No. 68
5 (.197)
10 (.394)
1 (.039)
)
φ
8
2.
11.2 (.441)
10
(.1
φ
35.2 (1.39)
40 (1.57)
2.
8
(.1
10
7
7
4.8 (0.189)
11
(.433)
(.276) (.276)
3 (0.118)
1.8
(.071)
)
83.38 (3.28)
0.51(0.020)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
40±0.1 (1.57±.002)
6-0 (.236-0)
9.5-0 (.347-0)
34±0.05 (1.33±0.002)
67.31+0.2 (2.65 +0.008)
75-0 (2.95-0)
61.7-0 (2.429-0)
51.7+0 (2.035+0)
Note 3
1.27±0.05 (0.05±0.002)
1.27 x (68/2-1) = 41.91±0.1 (1.65±0.004)
50.08±0.1 (2.00±0.004)
4.4-0 (.173-0)
5-0(.197-0)
PCB Foot Print Viewed
from Connector Side
NOTE 2
COMPONENT CON NOT BE
MOUNTED IN THIS AREA
NOTE 3
COMPONENTS THAT HAVE
5mm HEIGHT CAN BE
MOUNTED IN THIS AREA
NOTE 4
UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE ±0.5mm (0.002 in.)
1.905±0.05 (.075±0.002)
φ
±0
1
Note 2
5
.0
5.715±0.05 (.225±0.002)
68
3.810±0.05 (.150±0.002)
(.0
02
.0
±0
39
Unit: mm (in.)
)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
15
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, TWO LAYER EJECT TYPE)
■ DIMENSIONS
3.7 (0.146) (When a card is ejected)
40 (1.57)
11.2 (0.441)
42 (1.65)
1 (0.039)
11.2 (0.441)
40 (1.57)
2.42 (0.0953)
11 (0.433)
4.8 (0.189)
10
(0.394)
4.8 (0.189)
10
(0.394)
42 (1.654)
42 (1.654)
35.5 (1.398)
35.5 (1.398)
11
(0.433)
No. 68
4 (0.157)
No.34
No. 1
No. 35
Unit: mm (in.)
No. 68
No. 34
3 (0.118)
No.1
No. 34
No. 1
No. 35
No.68
2.1 (0.083)
4 (0.157)
11 (0.433)
11 (0,.433)
No.68
No.35
34 (1.34)
No.34
35.5 (1.40)
No.35
35.2 (1.385)
40 (1.57)
1.905 (0.075) × (8-1) = 13.335 (0.525)
59 (2.32)
No.1
67.31 (2.65)
59.7 (2.35)
50.8 (2)
83.38 (3.28)
10 (0.394)
78.5 (3.09)
7
7
(0.276) (0.276)
3.7 (0.146)
4.8 (0.189)
Part Number: FCN-565P 136G/005-V4
1.905 (0.075)
4.8 (0.189)
Connector with the left and right ejector
buttons
11 (0.433)
35.2 (1.385)
8 (0.315)
40 (1.57)
83.38 (3.28)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.34)
1 (0.039)
2.42 (0.0953)
7
7
(0.276) (0.276)
1.905 (0.075)
1.905 (0.075) × (8-1) = 13.335 (0.525)
Part Number: FCN-565P136-G/Z-V4
Unit: mm (in.)
No.1
No.35
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05)±0.05 (0.0020)
4- ø 2.8 (0.110) ±0.1 (0.0039)
40 (1.575) ±0.1 (0.0039)
613
No.1
No.35
No.34
No.68
ø 1±
0.0
5
No.34
No.68
1.905 (0.075) ±0.05 (0.0020)
1.905 (0.075) × (8-1) = 13.335 (0.525) ±0.05 (0.0020)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
34 (1.339) ±0.05 (0.0020)
67.31 (2.65) ±0.1 (0.0039)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
16
560H Series Connector Conforming to Ver. 4
FCN-560A*** EJECTORS FOR FCN-564/565 HEADERS
■ DIMENSIONS
50.6 (1.99)
25 (.984)
BEIGE
8 (.315)
ESD
35.5 (1.40)
78.5 (3.09)
59 (2.32)
42 (1.65)
10 (.394)
67.31 (2.650)
59.7 (2.35)
34 (1.34)
)
.110
.8 (
FCN-560A14
7 (.275)
7.22 (.284)
2.1 (.083)
4 (.157)
4 (.157)
4.8 (.189)
φ2
FCN-560A08
Button
Color
BLACK
Right Button
11 (.433)
Unit: mm (in.)
FCN-560A16
Button
Color
BLACK
FCN-560A22
BEIGE
Left Button
8 (.315)
4 (.157)
2.1 (.083)
10 (.394)
78.5 (3.09)
59 (2.32)
51 (2.01) min.
34 (1.34)
0)
7.22 (.284)
25 (.984)
ESD
35.5 (1.40)
.11
50.6 (1.99)
7 (.275)
4.8 (.189)
11 (.433)
4 (.157)
67.31 (2.650)
59.7 (2.35)
.8 (
42 (1.65)
φ2
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
17
560H Series Connector Conforming to Ver. 4
STRAIGHT PLUG, THROUGHHOLE TYPE LOW PROFILE
■ DIMENSIONS
59.74 (2.35)
1.27 x (34-1) = 41.9 (1.65)
1.27 (0.05)
5.715 (0.225)
No.1
No.35
No.17
No.51
No.34
No.68
2.40 (.0945)
6.00 (.236)
7.00 (.276)
44.80 (1.76)
51.80 (2.039)
10.80 (.425)
1.27 (0.05)
7.63 (.300)
25.80 (1.016)
5.50 (.216)
1.905 (0.075)
8.30 (.327)
3.00 (.118)
Part number: FCN-564P068-G/A-V4
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
No.1
1.27 x (68/2-1) = 41.91 (1.65) ±0.1 (0.0039)
±0.05 (0.0020)
1.27 (0.05)
1.905 (0.118) ±0.05 (0.0020)
5.715 (0.225)±0.05 (0.0020)
68
-Ø
No. 35
1
(0
.0
39
4)
No.68
51.8 (2.039) ±0.1 (0.0039)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
18
560H Series Connector Conforming to Ver. 4
STRAIGHT PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR)
■ DIMENSIONS
Part number: FCN-564P068-G/0-V4
Polarization Post
74 (2.91)
66.04 (2.6)
50.8 (2)
41.91 (1.65)
3.5
(0.138)
2.42 (0.095)
35.2 (1.390)
1.27 (0.05)
4.25 (0.167)
5 (0.197)
1 (0.039)
11.2 (0.441)
3 (0.118)
1.905 (0.075)
2- Ø 2.8
(0.110)
5.5 (0.217)
5.715 (0.225)
59.7 (2.35)
41.91 (1.65)
1.27 (0.05)
No.17
No.51
No.34
10
)
No.1
6 (0.236)
1.27 (0.05)
4 (0.157)
7 (0.394)
No.68
2-
Ø
2.
8
(0
.1
No.35
Unit: mm (in.)
• A model with the feature of preventing mismated board mounting is available. Contact Fujitsu.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
66.04 (2.6) ±0.1 (0.0039)
No.1
2-
68
-Ø
Ø
2.
.0
8
(0
.1
±0
10
)
.1
.1
.0
5
±0
±0
)
4)
94
39
03
(0
.
(0
No.68
1
00
(0
.0
03
(0
9)
.0
(0
03
.0
02
0)
9)
ed
us
1.905 (0.118) ±0.05 (0.0020)
±0.05 (0.0020)
1.
5.715 (0.225)
41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05)
No.3
Ø
±0.05 (0.0020)
No.2
tio
iza
ar
ol
rp
fo
n
po
st
Specifications
subject to change
Dimensions are in millimeters (inches)
Unit: mm (in.)
www.fcai.fujitsu.com
19
560H Series Connector Conforming to Ver. 4
STRAIGHT PLUG, THROUGHHOLE TYPE (WITH EJECTOR)
■ DIMENSIONS
Part number: FCN-564P068-G/X0-V4
74 (2.91)
67.31 (2.65)
66.04 (2.6)
4 (0.157)
.4
Ø 2.8 (0.110)
40 (1.57)
8 (0.315)
11 (0.433)
(When a cardis inserted)
R1
3.7 (0.146)
(When a cardis ejected)
36 (1.42)
5 (0.197)
2 – Ø 2.8 (0.110)
4.25 (0.167)
83.38 (3.28)
3.5 (0.138)
50.8 (2)
41.91 (1.65)
1.27 (0.05)
35.2 (1.39)
3 (0.118)
1.905 (0.075)
2.42 (0.095)
5.715 (0.225)
34 (1.34)
4.8 (0.177)
2.1 (0.083)
78.5 (3.09)
10 (0.394)
No.1
No.17
No.35
No.51
No.68
7 (0.276)
42 (1.653)
35.5 (1,40)
No.34
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
66.04 (2.6) ±0.1 (0.0039)
No.1
Specifications
subject to change
41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.3
1.905 (0.075) ±0.05 (0.0020)
5.715 (0.225)
±0.05 (0.0020)
No.2
Dimensions are in millimeters (inches)
268
-Ø
No.68
Ø
2.
8
1
(0
.1
10
(0
.0
)
39
4)
±0
.1
(0
.0
±0
03
.0
5
9)
(0
.0
02
0)
www.fcai.fujitsu.com
Unit: mm (in.)
20
560H Series Connector Conforming to Ver. 4
Fujitsu Components
International
Headquarter
Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141-0022, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://us.fujitsu.com/components
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
www.fcal.fujitsu.com
© 2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America, Inc. or its affiliates do not warrant that the content of the
datatasheet is error free. In a continuing effort to improve our products, Fujitsu Components America, Inc. or its
affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2, 2007.
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
21