Download Fujitsu FCN-086 User's Manual

2mm pitch metric connectors
For pcb Connection
FCN-086 /087 SERIES
nOVERVIEW
Fujitsu’s 2mm hard metric connector F-PACK-3 (FCN-086/087 series) are connectors for connecting boards
developed to support high-speed transmission/high density packaging of communication equipment,
conforms to IEC 917 (DIN 43355) and IEC 61076-4-101, and supports compact PCI. Product meets Bellcor
1217. To support high-speed transmission, these connectors implement low inductance, low cross-talk, and
matching characteristic impedance (50 ohms), exhibiting superb transmission characteristics.
Connection with the PCB is solderless (press fit) for both the plug/socket side, making mounting cost effective.
Insertion connections are completely unnecessary since a polarity key is supported.
Plug contact has a four level sequence structure that makes connection/disconnection in an active state
possible. Terminals have a five level pin length to support various applications. New customized connectors
can be supported by freely combining the pin lengths of contacts and terminals.
For shield plate products, which support high-speed transmission based on standard products, 5 row 55,
95, 110, 110 (with key) and 125 contact, plugs support 77, 133, 154 and 175 contacts. The shield plate
corresponds to the respective number of contacts, and the standard is post attachment. Sockets can also
be shipped with shields pre-attached.
8 row products are also in the series. Consult factory for your requirements.
Fujitsu has developed a new high density power connector (25% denser) to improve operability.
A double press fit, which can connect two printed boards with one connector, greatly contributes to
improved mounting and decreasing cost. Consult factory for details.
FCN-086 / 087 Series
n specifications
Specification
Item
Standard connector
Power connecto r
Operating temperature range
-55˚ C to +125˚ C
-40˚ C to +85˚ C
Current rating
1A DC max. (75˚ C )
7A DC/contact max. (75˚ C )
Voltage rating
500V AC r.m. s
56 V D C
Contact resistance
20mohms max. (DC 20mV,10mA ) 20mohms max. (DC 20mV, 10mA )
Insulation resistance
10,000 Mohms min. (100V DC )
10,000 Mohms min. (100V DC )
Dielectric strength
750V AC for 1 minut e
600V AC for 1 minut e
Insertion/Withdrawl life
125 time s
250 time s
Insertion force
0.75N/pin min .
20N/connector max .
Withdrawl force
0.15N/pin min .
1N/connector min .
nMaterials
n characteristics
Characteristic impedance 50 ohms
Transmission speed
300 MHz
Near end cross talk
4.3 % max.
Material
Item
Material
Item
Insulator
Conductor
Polyester resin (UL94V-0)
Copper alloy
Plating
Press fit: Solder
Press fit other: PAGOS
Contact area: Gold (PAGOS)
Lead / press fit area: Solder
n configuration of F&T 2 mm H.M. connector
1. Basic configuration of socket/plug
There are five types of sockets: three basic types: type A (110 contacts), type B (125 contacts), and type C
(55 contacts), and a 110 contact and 95 contact types. Many coding keys are in the series to prevent insertion
errors.
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
FCN-086 / 087 Series
n terminal configuration of plug
The contact pins have a three-level sequence structure and can be connected/disconnected in an active state. The terminal side can support various applications with four types of length. These combinations allow 20 types of terminals.
Relationship between housing and terminals
Terminal types in the series
Contact length
PWB Surface
Lead length
PC Board Face
Contact Types
Contact length
PWB Surface
Lead length
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
FCN-086 / 087 Series
Request Form for Customer Specific Pin Arrangement for 2mm Connectors
Part of the benefit of using the FCN-086 2mm Backplane connector is the flexibility of creating unique
contact loads in the connector body. To define your needs, make a photocopy of the following page(s),
select your connector needs, and fill in the blanks with the specific contact designation (see page 5 for
available contacts). Forward to Fujitsu for quotation and part number assignment. (Please note that the pin
arraignment drawings are "View from the Mating Side").
1. TYPE A (110 pos. with polarization key) (5+2)
f
e
d
c
b
a
z
1 2 3 4 5 6 7 8 9 10 11
2. TYPE B (125 pos.) (5+2)
15 16 17 18 19 20 21 22 23 24 25
f
e
d
c
b
a
z
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
3. TYPE C (55 pos.) (5+2)
f
e
d
c
b
a
z
1 2 3 4 5 6 7 8 9 10 11
4. 95 pos. (5+2)
f
e
d
c
b
a
z
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
FCN-086 / 087 Series
n transmission characteristics
The transmission characteristics were designed to an optimum level by repeating various transmission
characteristics simulations when the structure was designed, so as to improve the transmission characteristics of this connector. The characteristic impedance and the measurement device of the connector are
shown below.
Measurement Point
Measurement Result
Fujitsu Components
a
b
c
d
e
Ground
Not connected
Measurement signal
At Start
100 p s
300 p s
500 p s
1 ns
Frequency: Hz
1.75 GH z
580 MH z
350 M H z
175 MH z
Characteristic Impedance ( Ω )
45.3 to 64. 0 48.2 to 56. 8
49.2 to 54. 6 49.3 to 52. 8
Near/Far end cross talk: %
1.96/1.1 4
1.06/0.5 1
1.49/0.7 8
0.71/0.2 7
Other Supplier
At Start
100 p s
300 p s
500 p s
1 ns
Frequency: Hz
1.75 GH z
580 MH z
350 MH z
175 MH z
Characteristic Impedance ( Ω )
47.4 to 66. 1 48.2 to 56. 8 49.5 to 59. 2 47.7 to 53. 5
Near/Far end cross talk: %
2.24/1.4 1
300.0m
1.57/0.9 8
1.14/0.6 7
0.78/0.3 5
Delay Time
signal
10.00m
V/Div.
in
200.0m
49.00n
100.0p
out
Characteristic
Impedance
50.00n
S/Div
PC board part PC board part PC board part
1.Measurement voltage: Vin = 5.0V
2.Rise time: Tr = 100ps, 300ps, 500ps, 1ns
3.Measurement device: TDR measurement device CSA803 and SD24 (Tektronix)
4.Measurement system
C oaxial
cableformeasurement
Plug
Ω termination
50Ω
connecto
Socket
CSA 80.3
SD 24
M easurementboard
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
FCN-086 /087 Series
Compact PCI / VME
n standard and hot swap part numbers
Coding Keys for Daughter Card
FCN-086B1278 - 3.3V
or
FCN-086B2348 - 5.0V
Coding Keys for Midplane/Backplane
FCN-086A3456 - 3.3V
or
FCN-086A2348 - 5.0V
J1
P1
Fem ale
R eceptacle
s
M alePin
H eaders
1
J5
4
P5
R J5
1
2
J4
5
P4
R J4
2
3
J3
6
P3
R J3
3
1
J2
4
P2
R J2
1
2
J1
Fem ale
R eceptacle
s
Standard
5
H otSw ap
7
R ear
I/OC ard
3U =100.0
(3.937)
D aughtercard
6U =223.35
(9.19)
Backplane
P1
Reference
Number
160.0(6.
30)
n computer telephony part numbers
Coding Keys for Midplane/
Backplane
FCN-086A3456 - 3.3V
P1
or
FCN-086A2348 - 5.0V
FCN-086B1248 - P4
Coding Keys for Daughter Card
FCN-086B1278 - 3.3V
or
FCN-086B2348 - 5.0V
FCN-086B3567 - J4
J1
Part Number
Designation s
1
FCN-086J110-G111A-BC R
J5, J2, RJ5,
RJ2
2
FCN-086J110-G111-BC R
J4, J1, RJ 4
3
FCN-086J095-G111A-BC R
J3, RJ 3
4
FCN-086P154-G/111A-BC R P5, P 2
5
FCN-086P154-G/104-BC R
6
FCN-086P133-G/111A-BC R P 3
7
FCN-086P154-G/114-BC R
P1
8
Future Product s
J4, P 5
9
FCN-086P154-G/516-BC R
P4
P4, P 1
Backplane
1
8
J5
J4
Male Pin
Headers
8
P5
9
P4
3
J3
6
P3
1
J2
4
P2
2
J1
7
P1
Female
Receptacles
RJ5
1
RJ3
3
Rear I/O Transition Card
Daughtercard 6U =223.35
(9.19)
Female
Receptacles
160.0 (6.30)
80.0 (3.15)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
6-
FCN-086 /087 Series
Compact PCI / VME
P3 Type 3
STRAIGHT PLUG (133 POSITIONS)
n MOUNTING HOLE LAYOUT
n Dimensions
9.7+0.2
0
(0.382+0.008)
0
11.2+0.2
0
(0.440+0.008)
0
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): φ0.6±0.05
mm (.024)
3.7
(0.146)
3.7
(0.146)
2x(7-1)=12
(0.472)
2
(0.079)
2x(19-1)=36±0.1 (1.417±0.004)
13
3
(0. - Ø
02 0.6
4±
0.0 ±0.0
02 5
)
-0.004
2
(0.079) 2x(19-1)=36 (1.417)
(0.1180
2
(0.079)
2x(7-1)=12
(0.472)
0
3 -0.1
)
13.45 (0.530)
2x(7-1)=12±0.5
(0.472±0.002)
2±0.5
(0.079±0.002)
2±0.5
(0.079±0.002)
Unit: mm (in.)
Unit: mm (in.)
ORDERING PART NUMBER: FCN-086P133-G/111A-BCR
n
P3 Type B male feed through
STRAIGHT PLUG (133 POSITIONS)
n Dimensions
n MOUNTING HOLE LAYOUT
11.2+0.2
0
8.2+0.2
0
(0.039+0.008)
Thickness: 1.4 to 5.6 mm (.055 to .220
in.)
Drill hole Diameter: φ0.7±0.025 mm (.028
in.)
3.7
(0.146)
(0.440+0.008)
0
16 (0.630)
11.2+0.2
0
(0.440+0.008)
0
16 (0.630)
2x(7-1)=12
(0.472)
2x(19-1)=36 ±0.1 (1.417±0.004)
2
(0.079)
2x(19-1)=36 (1.417)
-0.004
13
(0 3 .0 Ø
24 0.
±0 6 ±
.0 0.0
02 5
)
(0.1180
2
(0.079)
2
(0.079)
0
3 -0.1
)
13.45 (0.530)
2x(7-1)=12±0.5
(0.472±0.002)
2±0.5
(0.079±0.002)
2±0.5 (0.079±0.002)
2x(7-1)=12
(0.472)
Unit: mm (in.)
n
Unit: mm (in.)
ORDERING PART NUMBER: FCN-086P133-G/502A-BCR
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
6-
FCN-086 /087 Series
Compact PCI / VME
P1/P4 Type A
STRAIGHT PLUG (154 POSITIONS)
n MOUNTING HOLE LAYOUT
n Dimensions
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05
mm (.024)
8.2+0.2
3.7
0
(0.039+0.008) (0.146)
9.7+0.2
3.7
(0.146)
0
(0.382+0.008)
11.2+0.2
0
3.7
(0.440+0.008) (0.146)
0
2
(0.079)
2±0.5
(0.079±0.002)
-0.004
0
3 -0.1
2x(7-1)=12
(0.472)
(0.1180
2 (0.079)
2x(11-1)=20 (0.787)
24 (0.945)
15
4
(0. - Ø
02 0.6
4±
0.0 ±0.0
02 5
)
0.1
2 (0.079)
2x(11-1)=20 (0.787)
2x(11-1)=20±0.5
(0.787±0.002)
4±0.5
(0.157±0.002)
+
Ø2 0 4
.00 )
790
¯(0.0 0
)
13.45 (0.530)
8±0.5
(0.315±0.002)
2±0.5
(0.079±0.002)
2x(11-1)=20±0.5
(0.787±0.002)
2x(7-1)=12±0.5
(0.472±0.002)
2x(7-1)=12
(0.472)
48 (1.890)
Unit: mm (in.)
Unit: mm (in.)
ORDERING PART NUMBER: FCN-086P154-G/104-BCR
n
P2/P5 Type B
STRAIGHT PLUG (154 POSITIONS)
n Dimensions
n MOUNTING HOLE LAYOUT
9.7+0.2
0
3.7
(0.382+0.008) (0.146)
0
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05
mm (.024)
11.2+0.2
3.7
0
(0.440+0.008) (0.146)
0
2x(7-1)=12±0.5
(0.472±0.002)
2±0.5
(0.079±0.002)
5
0.0
.6± )
Ø0 .002
0
415 024±
(0.
2x(22-1)=42(1.654)
2 (0.079)
2x(7-1)=12
(0.472)
0
3 -0.1
(0.1180
2
(0.079)
-0.004
)
13.45 (0.530)
2±0.5
(0.079±0.002)
2x(22-1)=42±0.1 (01.654±0.004)
2x(7-1)=12
(0.472)
2
(0.079)
Unit: mm (in.)
n
Unit: mm (in.)
ORDERING PART NUMBER: FCN-086P154-G/111A-BCR
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
6-
FCN-086 /087 Series
Compact PCI / VME
P1 Type A Hot Swap 110 Signal Connector
STRAIGHT PLUG (154 POSITIONS)
n MOUNTING HOLE LAYOUT
n Dimensions
8.2+0.2
0
3.7
(0.039+0.008) (0.146)
9.7+0.2
3.7
0
(0.382+0.008) (0.146)
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05
mm (.024)
11.2+0.2
3.7
0
(0.440+0.008) (0.146)
0
2x(11-1)=20±0.5
(0.787±0.002)
2x(7-1)=12
(0.472)
2±0.5
(0.079±0.002)
2x(7-1)=12±0.5
(0.472±0.002)
13.45 (0.530)
)
-0.004
0
3 -0.1
(0.1180
0
+0.1
Ø2 0 4
.00 )
790
2 (0.079)
2x(7-1)=12
(0.472)
15
4
(0. - Ø
02 0.6
4±
0.0 ±0.0
02 5
)
¯(0.0
2x(11-1)=20 (0.787)
2x(11-1)=20±0.5
(0.787±0.002)
4±0.5
(0.157±0.002)
2±0.5
(0.079±0.002)
2
(0.079)
2 (0.079)
2x(11-1)=20 (0.787)
24 (0.945)
8±0.5
(0.315±0.002)
48 (1.890)
Unit: mm (in.)
Unit: mm (in.)
n
ORDERING PART NUMBER: FCN-086P154-G/114-BCR
P4 Type A Male Feed Through
STRAIGHT PLUG (154 POSITIONS)
n Dimensions
n MOUNTING HOLE LAYOUT
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05
mm (.024)
8.2+0.2
0
(0.039+0.008)
16 (0.630)
11.2+0.2
0
(0.440+0.008)
0
16 (0.630)
2x(7-1)=12
(0.472)
8±0.5
2x(11-1)=20±0.5
(0.315±0.002)
(0.787±0.002)
2
(0.079)
2±0.5
(0.079±0.002)
-0.004
(0.1180
48 (1.890)
+0.1
0
2x(7-1)=12
(0.472)
Ø2 0 4
.00 )
790
2x(11-1)=20 (0.787)
24 (0.945)
2 (0.079)
¯(0.0
2 (0.079)
2x(11-1)=20 (0.787)
0
3 -0.1
)
13.45 (0.530)
2x(7-1)=12±0.5
(0.472±0.002)
2±0.5
(0.079±0.002)
2x(11-1)=20±0.5
(0.787±0.002)
4±0.5
(0.157±0.002)
Unit: mm (in.)
n
15
4
(0. - Ø
02 0.6
4±
0.0 ±0.0
02 5
)
Unit: mm (in.)
ORDERING PART NUMBER: FCN-086P154G/401-BCR
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
6-
FCN-086 /087 Series
Compact PCI / VME
Type 2 Feed Through
STRAIGHT PLUG (154 POSITIONS)
n Dimensions
n MOUNTING HOLE LAYOUT
8.2+0.2
0
(0.039+0.008)
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
Ø0.6±0.05 mm (.024)
16 (0.630)
11.2+0.2
0
(0.440+0.008)
0
16 (0.630)
2x(7-1)=12
(0.472)
2±0.5
(0.079±0.002)
-0.004
2x(7-1)=12±0.5
(0.472±0.002)
0
3 -0.1
2 (0.079)
2x(22-1)=42 (1.654)
2x(22-1)=42±0.1
(1.654±0.004)
2±0.5 (0.079±0.002)
(0.1180
2 (0.079)
0
3 -0.1
)
13.45 (0.530)
(0.1180
)
2x(7-1)=12
(0.472)
2
(0.079)
154 - Ø0.6±0.05
(0.024±0.002)
Unit: mm (in.)
Unit: mm (in.)
n
ORDERING PART NUMBER: FCN-086P154-G/401A-BCR
Type 2 feed through
STRAIGHT PLUG (154 POSITIONS)
n Dimensions
11.2+0.2
0
(0.440+0.008)
0
n MOUNTING HOLE LAYOUT
3.7
(0.146)
8.2+0.2
0
(0.039+0.008)
0
16 (0.630)
11.2+0.2
0
(0.440+0.008)
0
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
Ø0.6±0.05 mm (.024)
16 (0.630)
2x(22-1)=42±0.1 (1.654±0.004)
2±0.5
(0.079±0.002)
2±0.5
(0.079±0.002)
154 - Ø0.6±0.05
(0.024±0.002)
2 (0.079)
2x(7-1)=12
(0.472)
-0.004
2x(22-1)=42 (1.654)
(0.1180
2
(0.079)
0
3 -0.1
)
2x(7-1)=12±0.5
(0.472±0.002)
13.45 (0.530)
2x(7-1)=12
(0.472)
2
(0.079)
Unit: mm (in.)
n
Unit: mm (in.)
ORDERING PART NUMBER: FCN-086P154-G/502A-BCR
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
6-10
FCN-086 /087 Series
Compact PCI / VME
P5 Type B Feed thru Computer Telephony Connector
STRAIGHT PLUG (154 POSITIONS)
n MOUNTING HOLE LAYOUT
n Dimensions
11.2+0.2
0
3.7
(0.146)
(0.440+0.008)
0
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05
mm (.024)
8.2+0.2
0
(0.039+0.008)
0
16 (0.630)
11.2+0.2
0
(0.440+0.008)
16 (0.630)
0
2x(7-1)=12
(0.472)
2 (0.079)
2x(22-1)=42±0.1 (1.654±0.004)
2±0.5
(0.079±0.002)
13.45 (0.530)
2x(7-1)=12±0.5
(0.472±0.002)
2±0.5
(0.079±0.002)
154 - Ø0.6±0.05
(0.024±0.002)
2x(7-1)=12
(0.472)
-0.004
)
2x(22-1)=42 (1.654)
0
3 -0.1
2 (0.079)
(0.1180
2
(0.079)
Unit: mm (in.)
Unit: mm (in.)
n
ORDERING PART NUMBER: FCN-086P154-G/503A-BCR
P4 Type A Computer Telephony Connector
STRAIGHT PLUG (154 POSITIONS)
n Dimensions
n MOUNTING HOLE LAYOUT
8.2+0.2
0
3.7
(0.039+0.008) (0.146)
0
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05
mm (.024)
9.7+0.2
3.7
0
(0.382+0.008) (0.146)
0
11.2+0.2
0
3.7
(0.440+0.008) (0.146)
0
8±0.5
2x(11-1)=20±0.5
(0.315±0.002)
(0.787±0.002)
2x(7-1)=12
(0.472)
2±0.5
(0.079±0.002)
)
48 (1.890)
-0.004
(0.1180
2 (0.079)
2x(7-1)=12
(0.472)
0
3 -0.1
2x(11-1)=20 (0.787)
24 (0.945)
0
2 (0.079)
2x(11-1)=20 (0.787)
+0.1
¯2 0 4
.00 )
790
¯(0.0
13.45 (0.530)
2x(7-1)=12±0.5
(0.472±0.002)
2
(0.079)
2x(11-1)=20±0.5
(0.787±0.002)
4±0.5
(0.157±0.002)
2±0.5
(0.079±0.002)
Unit: mm (in.)
n
15
4
(0. - Ø
02 0.6
4±
0.0 ±0.0
02 5
)
Unit: mm (in.)
ORDERING PART NUMBER: FCN-086P154-G/516-BCR
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
6-11
FCN-086 / 087 Series
SOCKET: 55 CONTACTS
n Dimensions
2 x (11-1) = 20 (.787)
2 (.079)
l
ab
ail
av
ts
ar
DISCONTINUED
P
rs
be
m
Nu
rt
Pa ALTERNATE
NO
10.95 (0.431)
2.35
2
(.093) (.079)
3.7
(0.146)
3.4
(0.134)
n MOUNTING HOLE LAYOUT
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05
mm (.024)
10.8 (0.425)
9.2 (0.362)
a
25 (.984)
2 x (11-1) = 20 (.787)
2 (.079)
Section A-A
Unit: mm (in.)
2±0.05 (.079±0.002)
5
0.0 )
.6± 02
-f0 0.0
55 24±
(.0
2 x (6-1) = 10±0.05
(0.394±0.002)
2
(.079)
2 x (5-1) = 8 (.315)
11.4 (0.449)
2±0.05 (.079±0.002)
20.2 (0.795)
2
2
(.079) (.079)
b
1.5±0.05 (.0.060±0.002)
d
2 x (5-1) = 8
(.315)
0.3
(0.012)
e
2x (11-1)=20±0.05
(0.787±0.002)
Unit: mm (in.)
n
ORDERING PART NUMBER: FCN-086J055-G/101-BCR
FCN-086J055-G/111-BCR (with pre-attached upper shield)
SHIELD PLATE
n Dimensions
n Dimensions
4 x (6-1)=20 (0.787)
4±0.2
(0.157±0.008)
4 x (5-1)=16 (0.630)
Unit: mm (in.)
ORDERING PART NUMBER:
FCN-086J055-G/USD-BCR (top shield plate)
Specifications
subject to change
n
1.35
(0.053)
5.51
(0.217)
0.7±0.1
(0.0281±0.004)
1±0.1 (0.139±0.004)
2±0.1(0.079±0.004)
2 x (11-1)=20 (0.787)
21.15 MAX.
(0.833)
3.45±0.2
(.0136±0.008)
15 (0.591)
4.5 MAX.
(0.177)
(16.2) [0.638]
1
(0.039)
2±.1
(.079±.004)
0.40-0.1
(0.0160-0.004 )
,
2 x (11-1)=20 (0.787)
21.15 MAX.
(0.833)
1
(0.039)
5.35±0.1
(0.211±0.004)
2±0.1(0.079±0.004)
3.45±0.2
(.0136±0.008)
15 (0.591)
4.5 MAX.
(0.177)
5.35±0.1
(0.211±0.004)
1±0.1 (0.139±0.004)
21.7±0.2 (0.854±0.008)
Unit: mm (in.)
ORDERING PART NUMBER:
e
n
0.7±0.1
(0.0281±0.004)
90º
90°
2±.1
(.079±.004)
0.40-0.1
(0.0160-0.004 )
(16.2) [0.638]
21.7±0.2 (0.854±0.008)
0.4±0.05
(0.016±0.002)
0.4±0.05
(0.016±0.002)
10.85
(0.427)
6.7
(0.264)
4±0.2
(0.157±0.008)
FCN-086J055-G/LSD-BCR (bottom shield
plate)
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
12
FCN-086 / 087 Series
l
ab
ail
av
ts
ar
DISCONTINUED
P
rs
be
m
Nu
rt
Pa ALTERNATE
NO
SOCKET: 95 CONTACTS
n Dimensions
2 x (19-1) = 36 (1.417)
2 (.079)
10.95 (0.431)
0.3
(0.012)
2
2.35
(.093) (.079)
3.7
(0.146)
3.4
(0.134)
n MOUNTING HOLE LAYOUT
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05
mm (.024)
10.8 (0.425)
2
(.079)
2 x (19-1) = 36 (1.417)
2 (.079)
2 x (5-1) = 8 (.315)
11.4 (0.449)
Section A-A
Unit: mm (in.)
2±0.05 (.079±0.002)
2x (19-1)=36±0.05
(1.417±0.002)
5
.0
±0
.6 02)
Ø0 .0
4- ±0
11 24
(.0
2 x (6-1) = 10±0.05
(0.394±0.002)
A
38 (1.470)
2±0.05
(.079±0.002)
20.2 (0.795)
2
2
(.079)
(9.2)[0.362] (.079)
b
a
1.5±0.05
(.0.060±0.002)
d
A
2 x (5-1) = 8
(.315)
e
Unit: mm (in.)
ORDERING PART NUMBER: FCN-086J095-G/101A-BCR
FCN-086J095-G/111A-BCR (with pre-attached upper shield)
n
SHIELD PLATE
n Dimensions
n Dimensions
4 x (9-1)=32 (1.260)
6.7
(0.264)
4±0.2
(0.157±0.008)
15 (0.591)
4.5 MAX.
(0.177)
(16.2) [0.638]
1
(0.039)
2 x (19-1)=36(1.417)
37.15 MAX. (1.463)
0.7±0.1(0.0281±0.004)
1±0.1 (0.139±0.004)
2±0.1(0.079±0.004)
2 x (19-1)=36(1.417)
37.15 MAX. (1.463)
Unit: mm (in.)
Unit: mm (in.)
n
ORDERING PART NUMBER:
FCN-086J095-G/VSD-BCR (top shield plate)
Specifications
subject to change
3.45±0.2
(0.158±0.008)
1
(0.039)
5.35±0.1
(0.211±0.004)
0.4±0.05
(0.016±0.002)
0.4±0.05
(0.016±0.002)
(16.2) [0.638]
°
90
e
5.35±0.1
(0.211±0.004)
1±0.1 (0.139±0.004)
2±0.1(0.079±0.004)
)
2±.1
(.079±.004)
0.40-0.1
(0.0160-0.004 )
,
0.7±0.1(0.0281±0.004)
37.7±0.2 (1.484±0.008)
90û
2±.1
(.079±.004)
0.40-0.1
0
(0.016-0.004
15 (0.591)
4.5 MAX.
(0.177)
10.85
(0.427)
4±0.2
(0.157±0.008)
1.35(0.053)
5.51
(0.217)
4 x (10-1)=36 (1.417)
n
ORDERING PART NUMBER:
FCN-086J095-G/MSD-BCR (bottom shield plate)
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
13
FCN-086 / 087 Series
l
ab
ail
av
rts
DISCONTINUED
Pa
rs
be
m
Nu
rt
Pa ALTERNATE
NO
SOCKET: 110 CONTACTS
n Dimensions
48 (1.890)
2 x (11-1) = 20 (0.898)
2 (.079)
2 x (11-1) = 20 (0.898)
2 (.079)
10.95 (0.431)
b
(9.2)[0.362]
10.8 (0.425)
a
2
2
(.079) (.079)
20.2 (0.795)
d
2 x (11-1) = 20 (0.898)
2 (.079)
50 (1.969)
48 (1.890)
2
(.079)
2 x (5-1) = 8 (.315)
11.4 (0.449)
2 x (11-1) = 20 (0.898)
2 (.079)
Unit: mm (in.)
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05 mm
(.024)
2±0.05 (.079±0.002)
2x (25-1)=48±0.05
(1.890±0.002)
5
.0
±0
.6 2)
Ø0 .00
5- ±0
13 24
(.0
Section A-A
n MOUNTING HOLE LAYOUT
2 x (6-1) = 10±0.05
(0.394±0.002)
2±0.05 (.079±0.002)
1.5±0.05
(.0.060±0.002)
0.3
(0.012)
e
2 x (5-1) = 8
(.315)
3.7
(0.146)
3.4
(0.134)
2.35
2
(.093) (.079)
Unit: mm (in.)
ORDERING PART NUMBER: FCN-086J110-G/101-BCR
FCN-086J110-G/111-BCR (with pre-attached upper shield)
SHIELD PLATE
n Dimensions
n Dimensions
n
4 x (13-1)=48 (1.890)
4 x (12-1)=44 (1.732)
1.35(0.053)
5.51
(0.217)
4±0.2
(0.157±0.008)
0.4±0.05
(0.016±0.002)
6.7
(0.264)
Unit: mm (in.)
n
ORDERING PART NUMBER:
FCN-086J110-G/USD-BCR (with key, top
shield plate)
Specifications
subject to change
15 (0.591)
4.5 MAX.(0.177)
0.7±0.1
(0.0281±0.004)
6.35±0.15
(0.25±0.006)
2 x (11-1)=20 (0.787)
1±.1(.039±.004)
2±.1(.079±.004)
3.45±0.2
0.4±0.05
(0.016±0.002)
(16.2) [0.638]
1
(0.039)
5.35±0.1
(0.211±0.004)
2 x (11-1)=20
2 x (11-1)=20 (0.787)
(0.787)
49.15 MAX.
(1.935)
3.45±0.2
(0.158±0.008)
1±0.1 (0.139±0.004)
2±0.1(0.079±0.004)
1 (0.139)
2±.1
(.079±.004)
0.40-0.1
(0.0160-0.004 )
,
6.35±0.15
(0.25±0.006)
0.7±0.1
(0.0281±0.004)
90º
49.7±0.2 (1.957±0.008)
e
5.35±0.1
(0.211±0.004)
2±.1
(.079±.004)
0.40-0.1
(0.0160-0.004 )
90û
15 (0.591)
4.5 MAX. (0.177)
49.7±0.2 (1.957±0.008)
(162) [6.378]
10.85
(0.427)
4±0.2
(0.157±0.008)
49.15 MAX.
(1.935)
2 x (11-1)=20
(0.787)
Unit: mm (in.)
n
ORDERING PART NUMBER:
FCN-086J110-G/LSD-BCR (with key,
bottom, shield plate)
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
14
FCN-086 / 087 Series
SOCKET: 110 CONTACTS WITHOUT KEY
l
ab
ail
av
ts
ar
DISCONTINUED
P
rs
be
m
Nu
rt
Pa ALTERNATE
NO
n Dimensions
2 x (22-1) = 42 (1.654)
2 (.079)
3.7
(0.146)
3.4
(0.134)
0.3
(0.012)
e
d
2 x (5-1) = 8
(.315)
10.95 (0.431)
2.35
2
(.093) (.079)
n MOUNTING HOLE LAYOUT
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)
Drill hole Diameter: ∅0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
∅0.6±0.05 mm (.024)
20.2 (0.795)
2
2
(.079) (.079)
b
2
(.079)
2 (.079)
2 x (5-1) = 8 (.315)
11.4 (0.449)
Section A-A
Unit: mm (in.)
2±0.05 (.079±0.002)
2x (22-1)=36±0.05
(1.654±0.002)
5
0.0
.6± 2)
¿0 00
2- 0.
13 24±
(.0
2 x (6-1) = 10±0.05
(0.394±0.002)
1.5±0.05
2±0.05
(.0.060±0.002)
(.079±0.002)
(9.2)[0.362]
44 (1.732)
2 x (22-1) = 42 (1.654)
10.8 (0.425)
a
Unit: mm (in.)
ORDERING PART NUMBER: FCN-086J110-G/101A-BCR
FCN-086J110-G/111A-BCR (with pre-attached upper shield)
SHIELD PLATE
n Dimensions
n Dimensions
n
4±0.2
(0.157±0.008)
[ Unit: mm (in.)
n
ORDERING PART NUMBER:
FCN-086J110-G/VSD-BCR (without key, top
shield plate)
Specifications
subject to change
n
““
“
“
““
“
“
““
[ 0$;
e
43.15 MAX.
(1.699)
0$;
(16.2) [0.638]
2±0.1(0.079±0.004)
2 x (22-1)=42(1.654)
>@
1
(0.039)
“
“
1±0.1 (0.139±0.004)
º
90
““
,
0.7±0.1
(0.0281±0.004)
3.45±0.2
(0.158±0.008)
4.5 MAX.
(0.177)
2±.1
(.079±.004)
0.40-0.1
(0.0160-0.004 )
€
15 (0.591)
43.7±0.2 (1.720±0.008)
5.35±0.1
(0.211±0.004)
“
“
0.4±0.05
(0.016±0.002)
10.85
(0.427)
6.7
(0.264)
“
“
4 x (11-1)=40 (1.575)
Unit: mm (in.)
ORDERING PART NUMBER:
FCN-086J110-G/MSD-BCR (without key,
bottom shield plate)
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
15
FCN-086 / 087 Series
l
ab
ail
av
rts
DISCONTINUED
Pa
rs
be
m
Nu
rt
Pa ALTERNATE
NO
SOCKET: 125 CONTACTS
n Dimensions
2 x (25-1) = 42 (1.890)
2 (.079)
10.95 (0.431)
e
d
2 x (5-1) = 8
(.315)
3.7
(0.146)
3.4
(0.134)
0.3
(0.012)
2
2.35
(.093) (.079)
2
(.079) 2
(.079)
20.2 (0.795)
b
(9.2)[0.362]
2 (.079)
n MOUNTING HOLE LAYOUT
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)
Drill hole Diameter: ∅0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
∅0.6±0.05 mm (.024)
2
(.079)
2 x (5-1) = 8 (.315)
11.4 (0.449)
Section A-A
Unit: mm (in.)
2±0.05 (.079±0.002)
2x (25-1)=48±0.1
(1.890±0.004)
Unit: mm (in.)
5
0.0
.6± 2)
¿0 00
0- 0.
15 24±
(.0
2 x (6-1) = 10±0.05
(0.394±0.002)
1.5±0.05
2±0.05
(.0.060±0.002)
(.079±0.002)
50 (1.969)
2 x (25-1) = 48 (1.890)
10.8 (0.425)
a
ORDERING PART NUMBER: FCN-086J125-G/101-BCR
FCN-086J125-G/111-BCR (with pre-attached upper shield)
SHIELD PLATE
n Dimensions
n Dimensions
4 x (13-1)=48 (1.890)
n
ORDERING PART NUMBER:
FCN-086J125-G/USD-BCR (top shield plate)
(16.2) [0.638]
15 (0.591)
4.5 MAX.
(0.177)
0.4±0.05
(0.016±0.002)
Unit: mm (in.)
5.35±0.1
(0.211±0.004)
3.45±0.2
(0.158±0.008)
15 (0.591)
4.5 MAX.
(0.177)
5.35±0.1
(0.211±0.004)
2±0.1(0.079±0.004)
2 x (25-1)=48(1.890)
49.15 MAX.
(1.935)
Specifications
subject to change
1(0.039)
1
(0.039)
2±.1
(.079±.004)
0.40-0.1
(0.0160-0.004 )
,
90º
49.7±0.2 (1.957±0.008)
e
1±0.1 (0.139±0.004)
90º
0.7±0.1
(0.0281±0.004)
(16.2) [0.638]
49.7±0.2 (1.957±0.008)
2±.1
(.079±.004)
0.40-0.1
(0.0160-0.004 )
0.4±0.05
(0.016±0.002)
10.85
(0.427)
6.7
(0.264)
4±0.2
(0.157±0.008)
1.35(0.053)
5.51
(0.217)
4 x (12-1)=44 (1.732)
4±0.2
(0.157±0.008)
3.45±0.2
(0.158±0.008)
n
0.7±0.1
(0.0281±0.004)
1±0.1 (0.139±0.004)
2±0.1(0.079±0.004)
2 x (25-1)=48(1.890)
49.15 MAX.
(1.935)
Unit: mm (in.)
n
ORDERING PART NUMBER:
FCN-086J125-G/LSD-BCR (bottom shield plate)
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
16
FCN-086 / 087 Series
CODING KEY
n Dimensions
6.1
(0.240)
2.35
(0.093)
5.75
(0.226)
6.55
(0.258)
2.2
(0.087)
n Dimensions
9.2 (0.362)
2.9
(0.114)
3.8
(0.150)
7.9
(0.311)
3.15
(0.124)
6.75
(0.266)
2
(0.079)
8.9 (0.350)
n
ORDERING PART NUMBER:
FCN-086A3568
n
ORDERING PART NUMBER:
FCN-086B1247
Quanties: 50 pieces/package; minium order quanity: 500 piecs
n
COMBINATION OF CODING KEYS
Plug
Jack
Color
Plug
Jack
Nut brown
1236
4578
Reseda green
2578
1346
Ultramarine
blue
1238
4567
Slate gray
3467
1258
Strawberry
1248
3567
red
Antique pink
3567
1248
Pastel orange
Olive yellow
1268
3457
Color
3568
1247
Brilliant blue
1567
2348
n
ORDERING PART NUMBERs:
Plug Coding Key: FCN-086A****
Jack Coding Key: FCN-086B****
Specifications
subject to change
****: Add Coding Key number: eg: FCN-086A1268
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
17
FCN-086 / 087 Series
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://us.fujitsu.com/components/
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. August 15, 2007
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
18