Download Fonexion FX30 User's Manual
Transcript
Bluetooth FX30 The FX30 is a wireless headset equipped with Bluetooth technology. It is specially designed for different kinds of Bluetooth cell phones. How can I use my FX30 Bluetooth headset? You can connect your FX30 headset to your mobile phone, PC or any device with Bluetooth technology that supports the Headset or the Hands free profile. This user's guide focuses on how to use the headset with your mobile phone. You need to have a phone with built-in Bluetooth capability, or a phone with a Bluetooth adapter connected to it. When the headset is connected to your mobile phone, you can use voice control to make calls (if your phone supports this function). The phone can be tucked away in your pocket or in a bag. You can handle incoming and out going calls, and adjust the volume, using the buttons on the headset. Buttons Package Contents FX30 Bluetooth Headset USB Charger Inter-Changeable panel User manual Quick Start guide 1. Fully charge your FX30 The FX30 headset comes with a built - in rechargeable battery. We recommend that you charge the battery until the headset indicator turns off before using the headset for the first time. During charging, the indicator light shows a steady red light and the headset is turned off. When the battery is fully charged, the indicator will be off. It takes 3 to 3.5 hours to fully recharge the battery. Always use the manufacturer’s charger. 2. Switch on the Headset. Press and hold the MFB (around 5 seconds) in power off mode until LED flashes 3 times and you hear 2 short beep tones. The headset is then on. To turn the headset off press and hold the MFB (around 4 seconds) until the LED flashes 3 times and you hear 2 short beep tones. The LED will turn off and the headset is then off. 3. Pairing the FX30 headset with a phone a. Prepare your phone according to the phone's user manual on pairing. b. Press MFB button for up to 8 seconds until the indicator light on the headset flashes blue and red alternatively. The FX30 is now in pairing mode. c. Continue according to the instructions in the phone's user manual and press yes or OK when asked if you want to pair the phone with the FX30. d. Enter passkey “0000” then press Yes or OK. e. Your phone will confirm when pairing is complete. You pair the headset with the phone by adding it to a list of paired devices in the phone. The two devices then recognize each other when they connect. Once you have paired your headset with the phone, you do not need to pair it again until you want to use it with another device. 4. Putting on the headset Make sure the ear hook forms an angle of 90 Place the ear hook behind your ear Make sure the microphone is pointing towards your mouth Make sure the speaker is positioned as shown in the picture Features Bluetooth V1.2 Profiles supported Headset & Handsfree Range – up to 10 m (33 feet) Security Pairing, Encryption & Authentication Type of battery Rechargeable Lithium Polymer Talk Time- up to 5 hours Standby Time- up to 180 hours Charging Time 3-3.5 hours VoIP compatible Skype, Messenger etc… Troubleshooting & Warning No sound contact between headset and phone. The headset and the phone you are using with it have to be paired to recognize each other. They also have to be within range of each other. Make sure that there are no solid objects, such as walls or furniture, in between the headset and the phone. The indicator light flashes red. This indicates that the headset has only limited talk and standby time left. Charge the headset battery for approximately 3 to 3.5 hours. Don't expose the Headset and Charger to any liquid, moisture or humidity as they aren't waterproof. Don't use the Headset and Charger in extreme temperatures. If you don't use the Headset for long periods, be sure store it in a cool, dry place away from extreme temperatures and dust. Only use the supplied manufacturer’s charger when charging the headset. Operation Guide FUNCTION Turn on Turn off Pairing OPERATION LED INDICATION Press and hold the MFB for 5 seconds in power LED flashing blue AUDIO INDICATION 3 2 short beep tones off mode times Press and hold the MFB for 4 seconds in LED flashing red 3 times 2 short beep tones standby mode then off 1. In the power off mode press and hold the LED flashing in Blue MFB for 8 seconds and Red alternatively 2. Perform a device search from the phone 3. Press the YES soft key and enter the passkey Pairing is "0000" when the to the headset with the phone pair successful headset indicator flashes 6 times rapidly Volume Adjustment Press the V(+) or V(-) repeatedly to increase or Short tones decrease speaker volume Receive Call Press the MFB once Ringing tone stopped End Call Press the MFB once A short beep tone Voice Dialing * 1. Press MFB once A tone sounds to prompt the user to speak the name of the person he wishes to call 2. Say the voice tag name the phone finds the entry, pauses two seconds, then places the call Re-dialing Press and hold the V(-) button around 3 seconds Reject Call 1. Press and hold the MFB button around 3 Recall the last number dialed seconds to reject the incoming call Mute Press V(+) and V(-) buttons around 3 seconds 1 short beep tone, microphone is muted. Un-mute Power Press V(+) or V(-) button once saving in standby Press V(+) or V(-) button once mode Release power saving in power saving mode 1 short beep tone none flashing in blue or 1 short beep tone red Press V(+) or V(-) button once 1 short beep tone