Transcript
Outside Plant for Business-Critical Continuity™ 1400 Series Cable Caps Application These neoprene or TPR caps seal off open cable ends. Caps with air valves retain a nominal air pressure of five to fifteen pounds. The adjustable stainless steel band clamps enable caps to be used effectively on cable .250 inches (6.35mm) to .500 inches (12.70mm) smaller than the cap’s inside diameter. All caps are 4.0 inches (101.60mm) long. 1420V 2" Cable Cap With Air Valve 1405V .5" Cable Cap With Air Valve Ordering Information Catalog Number With Air Valve 1405V 1407V 1410V 1415V 1420V 1430V Without Air Valve 1405 1407 1410 1415 1420 1425 1430 Part Number Inside Diameter of Cap F012995 F013000 F013010 F013020 F013030 F013050 .500" (12.77mm) .750" (19.05mm) 1.00" (25.40mm) 1.50" (38.10mm) 2.00" (50.80mm) 3.00" (76.20mm) F012895 F012900 F012910 F012920 F012930 F012940 F012950 .500" (12.77mm) .750" (19.05mm) 1.00" (25.40mm) 1.50" (38.10mm) 2.00" (50.80mm) 2.50" (63.50mm) 3.00" (76.20mm) 1430 3" Cable Cap Without Air Valve EmersonNetworkPower.com/EnergySystems (North America) EmersonNetworkPower.eu/EnergySystems (EMEA) © Emerson Network Power Energy Systems North America 2012. Business-Critical Continuity™, Emerson Network Power™, the Emerson Network Power logo, Emerson® and Consider it Solved are service marks and trademarks of Emerson Electric Co. EnergyMaster™, eSure™, NetPerform™, NetReach™, NetSpan™, NetSure® and NetXtend™ are trademarks of Emerson Network Power Energy Systems North America. 154100-Caps / 0712