Transcript
050896 Outdoor Housing for Pan/Tilt IP Camera Package Contains: Housing x 1, Bracket x1, Power Adapter x1, Connect Cable x 1, Cover x 1, Fixing Bridge x 1, Screws STEP 1: Get the power cord and the Ethernet Components STEP 2: Get power cord and Ethernet cable cable through the bracket. STEP 3: Fix the dome on the fixing bridge. through out, then plug power cord into “DC 12V IN” and plug Connect cable into “DC 12V OUT ”. STEP 4: Fix dome on housing via fixing bridge. STEP 5: Assemble the bracket and the housing Plug in power and network cable to the dome. part, then cover up tightly.
