Download Dell OpenManage Server Administrator Version 6.3 User's Manual

omconfig chassis/omconfig mainsystem
Use the omconfig chassis or omconfig mainsystem commands to default or
to set values for fan, voltage, and temperature probes, to configure BIOS
behavior during system start up, to clear memory error counts, and to enable
or disable power button control features where system configuration permits.
Use the omconfig chassis -? or omconfig mainsystem -? command to view a
list of all omconfig chassis/omconfig mainsystem commands.
omconfig chassis biossetup/omconfig mainsystem biossetup
Use the omconfig chassis biossetup or omconfig mainsystem biossetup
command to configure system BIOS settings that are normally available only
in your system's BIOS setup boot time settings.
CAUTION: Changing certain BIOS setup options might disable your system or
require you to reinstall the operating system.
NOTE: Reboot your system for the BIOS setup options take effect.
NOTE: Not all BIOS setup options are available on every system.
NOTE: Due to the limitations of certain operating systems (for example, VMware
ESXi), certain features may not be available with this release of OpenManage
Server Administrator.
Table 4-3 shows the name=value pairs you can use with this command.
Table 4-3. BIOS Setup Settings
name=value pair 1 name=value pair 2
attribute=
setting=
attribute=
acpwrrecovery
Description
setting=off | last| on off: System is turned off.
last: System returns to previous state.
on: System is turned on.
delay=random |
random: System is turned on with
immediate | timedelay random delay.
time <value>
immediate: System returns to previous
state immediately.
timedelay <value>: System is turned
on based on user specified time delay.
omconfig: Managing Components Using the Instrumentation Service
89