Download Dell Lifecycle Controller 2 Version 1.0.8 User's Manual

String of up to 255 ASCII characters that designate a valid path name.
Default
""
Description
The path name pointing to the firmware update binary file. If this is a file name only, then the path needs to be specified in the TFTP server. Otherwise, the
entire path can be specified here.
NOTE: The server may still require you to specify the drive (for example, C).
cfgUserAdmin
This group contains parameters that you can use to configure which users are allowed access to the DRAC 4.
Sixteen instances of the group are allowed, which corresponds to a user for each index. The following subsections describe the objects in this group.
cfgUserAdminPrivilege (Read/Write)
NOTE: To modify this property, you must have Configure Users permission.
Legal Values
0x80000000 to 0x800001ff, and 0x0
Default
0
Description
Use the bit mask numbers in Table B-1 to set role-based authority privileges for a DRAC 4 user.
Table B-1. Bit Masks for User Privileges
User Privilege
Bit Mask
Log In To DRAC 4
0x80000001
Configure DRAC 4
0x80000002
Configure Users
0x80000004
Clear Logs
0x80000008
Execute Server Control Commands 0x80000010
Access Console Redirection
0x80000020
Access Virtual Media
0x80000040
Test Alerts
0x80000080
Execute Debug Commands
0x80000100
cfgUserAdminUserName (Read/Write)
NOTE: To modify this property, you must have Configure Users permission.
Legal Values
A string of up to 19 ASCII characters.