Download Carrier AQUAFORCE 30XA080-500 User's Manual

[748]
14
[162]
[208]
[397]
30XA UNIT
180
200
[2236]
B
143.04 [3633]
142.97 [3631]
LEFT END VIEW
A
46.12 [1171]
46.15 [1172]
NOTES:
1. Unit must have clearances as follows:
Top — Do not restrict
Sides and Ends — 6 ft (1.8 m) from solid
surface.
2. Temperature relief devices are located on
liquid line and economizer assemblies and
have 1/4-in. flare connection.
3. 3/8-in. NPT vents and drains located in
each cooler head at each end of cooler.
4. Drawing depicts unit with single point
power, standard two-pass cooler, and a
nominal voltage range of 380 to 575 v.
Refer to the Packaged Chiller Builder program for other configurations.
5. Dimensions are shown in inches. Dimensions in [ ] are in millimeters.
6. Allow 8 ft (2.4 m) on either side of unit for
condenser coil removal.
a30-4408
[459]
B
[1475]
[7168]
[7168]
[1982]
FRONT VIEW
[863]
[4502]
TOP VIEW
[4502]
[914]
Fig. 7 — 30XA180,200 Air-Cooled Liquid Chiller Dimensions
[2300]
[1555]
[2769]
[1982]
[508]
[162]
[860]
A
[287]
[2236]
[2300]
[1782]
[571]
[1528]