Download Canon LV-7355 Owner's Manual
Transcript
Basic Functional Execute Command execute command C00 C01 C02 C05 C06 C07 C08 C09 C0A C0B C0C C0D C0E C0F C10 C1C C1D C1E LV-7355/7350 (MK8P) item POWER ON POWER OFF ( Quick PowerOFF) POWER OFF COMPUTER 1 MODE SET VIDEO MODE SET COMPUTER 2 MODE SET COMPUTER 2 (Digital) MODE SET VOLUME + VOLUME SOUND MUTE ON SOUND MUTE OFF NO SHOW ON NO SHOW OFF AV REGULAR SIZE AV WIDE SIZE MENU ON MENU OFF DISPLAY CLEAR LV-7355/7350 execute (MK8P) command item IMAGE C27 D.ZOOM + C30 D.ZOOM C31 POINTER RIGHT C3A POINTER LEFT C3B POINTER UP C3C POINTER DOWN C3D ENTER (SET) C3F FREEZE ON C43 FREEZE OFF C44 ZOOM C46 ZOOM + C47 FOCUS C4A FOCUS + C4B AUTO PC Adj. C89 Presen timer C8A Keystone + C8E Keystone C8F Basic Status Read Command Status read command Item CR0 Status Read CR1 Input Mode Read CR3 Lamp Time Read CR4 Setting Read LV-7355/7350 Status Status Details Power Response the projector power status in 2 byte Input Mode Response the input mode in 1 byte code Total lamp running Show the Total lamp running time in quadruple time Setting Response the setting status in 2 byte code 1.Power Status Status Command Power Is ON ( Normal) 00 StandBy 80 Show "Count down" just after turning on the power 40 Cooling fan is on just after turning off the power 20 Abnormal power supply voltage 10 Cooling down because of exceeding critical temperature 28 Exceeding critical temperature 08 StandBy mode after recovering the exceeding critical temperature 88 Any buttons on a projector is not available 02 Processing Power Save· Cooling Down 24 Power Save 04 2.Input Mode Status Status Command Current input mode is "Computer 1" 1 Current input mode is "Video" 2 Current input mode is "Computer 2" 3 3.Total lamp running time status Status Command Show the total lamp running time in quadruple digits **** 4.Setting Status Status Command Normal screen setting 11 Rotation around the horizontal setting 10 Rotation around the horizontal setting 01 Vertical and right-and-left (four directions) reversal setting 00 Extended Functional Execute Command parameter execute command item CF_FSYNC_"parameter" STAND REAL CINEMA CUSTOM1 RST STR1 000 ~ 063 UP DN 000 ~ 063 UP DN 000 ~ 063 UP DN 000 ~ 063 UP DN 000 ~ 031 UP DN 000 ~ 015 UP DN 000 ~ 063 UP DN 000 ~ 063 UP DN 000 ~ 063 UP DN ON OFF 000 ~ 063 UP DN UP DN Set Image mode to Standard Set Image mode to High Contrast Set Image mode to Cinema Set Image mode to Custom Reset Screen Image Adjustment Store the current screen image adjustment data to Custom Set a Brightness setting value by parameter determination Brightness setting value +1 Brightness setting value -1 Set Contrast setting value by parameter determination Contrast setting value +1 Contrast setting value +1 Set Color setting value by parameter determination Color setting value +1 Color setting value -1 Set Tint setting value by parameter determination Tint setting value +1 Tint setting value -1 Set Sharpness setting value by parameter determination Sharpness setting value +1 Sharpness setting value -1 Set Gamma setting value by parameter determination Gamma setting value +1 Gamma setting value -1 Set White Balance Red setting value by parameter determination White Balance Red setting value +1 White Balance Red setting value -1 Set White Balance Green setting value by parameter determination White Balance green setting value +1 White Balance green setting value -1 Set White Balance Blue setting value by parameter determination White Balance Blue +1 White Balance Blue setting value -1 Set Bright SW to ON Set Bright SW to OFF Set volume setting value by parameter determination Volume setting value +1 Volume setting value -1 Finesync setting value +1 Finesync setting value -1 CF_TDOTS_"parameter" UP DN total dot setting value +1 total dot setting value -1 CF_CLAMP_"parameter" UP DN Clamp setting value +1 Clamp setting value -1 CF_H-POS_"parameter" UP DN Horizontal position setting value +1 Horizontal position setting value -1 CF_V-POS_"parameter" UP DN Vertical position setting value +1 Vertical position setting value -1 UP DN UP DN UP DN UP DN Current AV horizontal resolution setting value +1 Current AV horizontal resolution setting value -1 Current AV vertical resolution setting value +1 Current AV vertical resolution setting value -1 Current vertical position setting value +1 Current AV vertical position setting value -1 Current AV vertical position setting value +1 Current AV vertical position setting value -1 Reset value which was set as in CF_AVDDOTS/CF_AVDLINEF video horizontal/vertical resolution to default setting value Set Input to Computer1 Set Input to Video Set Input to Computer (When with MCI, set Input to MCI, and When with WI, set Input to WI.) CF_IMAGE_"parameter" CF_IMAGEADJ_"parameter" CF_BRIGHT_"parameter" CF_CONT_"parameter" CF_COLOR_"parameter" CF_TINT_"parameter" CF_SHARP_"parameter" CF_GAMMA_"parameter" CF_WBAL-R_"parameter" CF_WBAL-G_"parameter" CF_WBAL-B_"parameter" CF_TURBO_"parameter" CF_VOLUME_"parameter" CF_AVDDOTS_"parameter" CF_AVDLINE_"parameter" CF_AVHPOS_"parameter" CF_AVVPOS_"parameter" CF_AVSERV_"parameter" CF_INPUT_"parameter" CF_SOURCE_"parameter" CF_SYSTEM_"parameter" RST 1 2 3 DIGITAL ANALOG VIDEO S-VIDEO YPBPR Set to Digital for input source Set to Analog for input source Set to Video for input source Set to S-Video for input source Set to Component for input source AUTO NTSC NTSC443 PAL SECAM PAL-M PAL-N Set to Auto for AV system Set to NTSC for AV system Set to NTSC443 for AV system Set to PAL for AV system Set to SECAM for AV system Set to PAL-M for AV system Set to PAL-N for AV system execute command CF_SCREEN_"parameter" parameter Set to 1080i for AV system Set to 1035i for AV system Set to 720p for AV system Set to 575p for AV system Set to 480p for AV system Set to 575i for AV system Set to 480i for AV system NORMAL WIDE DZOOM_UP DZOOM_DN Set to Normal for screen size Set to Wide for screen size Zoom in Zoom out ON OFF CF_DZCENT_"parameter" CENT ENG DEU FRA ESP ITA CF_LANG_"parameter" POR NED SVE JPN KOR CHI ON CF_ON-STA_"parameter" OFF ON CF_P-MANE_"parameter" OFF UP FUP DN FDN CF_KEYSTONE_"parameter" LEFT FLFT RIGHT FRGT RST ON CF_BBACK_"parameter" OFF ON CF_DISP_"parameter" OFF ON CF_LOGO_"parameter" OFF ON CF_CEIL_"parameter" OFF ON CF_REAR_"parameter" OFF 001 CF_RCODE_"parameter" 002 CF_LAMPH_"parameter" RST MAX CF_FANSPEED_"parameter" NOR CF_TRUE_"parameter" item 1080I 1035I 720P 575P 480P 575I 480I Set to True for screen size Cancel True for screen size Cancel digital zoom Set English as OSD language Set German as OSD language Set French as OSD language Set Spanish as OSD language Set Italian as OSD language Set Portuguese as OSD language Set Dutch as OSD language Set Swedish as OSD language Set Japanese as OSD language Set Korean as OSD language Set Chinese as OSD language Set to ON for Power ON Start function Set to OFF for Power ON Start function Set to ON for Power management function Set to OFF for Power management function Make the screen image length at the top edge shorter with a small range Make the screen image length at the top edge sorter with a large range Make the screen image length at the bottom edge shorter with a small range Make the screen image length at the bottom edge shorter with a large range Make the screen image length at the left edge shorter with a small range Make the screen image length at the left shorter with a large range Make the screen image length at the right edge shorter with a small range Make the screen image length at the right shorter with a large range Set Keystone to OFF Set Blue Back to ON Set Blue Back to OFF Set Display to ON Set Display to OFF Set Logo to ON Set Logo to OFF Set Ceiling function of Setting to ON Set Ceiling function of setting to OFF Set Rear function of setting to ON Set Rear function of setting to OFF Set Remote control receiving code to 1 Set Remote control receiving code to 2 Reset total lamp running time ( n=1 ~4 ? 1 =lamp No.1? 2 =lamp No.2,...) Set Fan Speed to MAX Set Fan Speed to NORMAL Extended Status Read Command status read command LV-7355/7350 item CR_IMAGE Get the status of image mode CR_IMGGMD Get the setting value for image gamma CR_BRIGHT CR_CONT CR_COLOR CR_TINT CR_SHARP CR_GAMMA CR_WBAL-R CR_WBAL-G CR_WBAL-B Get Brightness setting value Get the Contrast setting value Get Color setting value Get Tint setting value Get Sharpness setting value Get Gamma setting value Get White Balance Red setting value value Get White Balance Blue setting value CR_TURBO Get Bright SW setting status CR_VOLUME Get volume setting value CR_MUTE Get sound mute status CR_INPUT Get selected input value CR_SOURCE Get selected source CR_SCREEN Get selected screen size setting value CR_SYSTEM CR_LANG CR_ON-STA CR_P-MANE CR_SIGNAL CR_BBACK CR_DISP CR_LOGO CR_VMUTE CR_FREEZE CR_PTIMER CR_RCODE ( MK8P) status status details "error code"_STAND "error code"_REAL "error code"_CINEMA "error code"_CUSTOM1 "error code"_STD "error code"_REAL "error code"_CNM "error code"_nnn "error code"_nnn "error code"_nnn "error code"_nnn "error code"_nnn "error code"_nnn "error code"_nnn "error code"_nnn "error code"_nnn "error code"_ON "error code"_OFF "error code"_nnn "error code"_ON "error code"_OFF "error code"_1 "error code"_2 "error code"_3 Standard is selected High Contrast is selected Cinema is selected Custom is selected Standard is selected High Contrast is selected Cinema is selected Brightness setting value. ( nnn = 000 ~ 063) Contrast setting value. ( nnn = 000 ~ 063) Color setting value. ( nnn = 000 ~ 063) Tint setting value. ( nnn = 000 ~ 063) Sharpness setting value. ( nnn = 000 ~ 031) Gamma setting value. ( nnn = 000 ~ 015) White Balance Red setting value. ( nnn = 000 ~ 063) White Balance Green setting value. ( nnn = 000 ~ 063) White Balance Blue setting value. ( nnn = 000 ~ 063) Bright SW is ON Bright SW is OFF Volume setting value. ( nnn = 000 ~ 063) Sound Mute is ON Sound Mute is OFF Computer 1 is selected Video is selected Computer 2, MCI or WI is selected "error code"_WIDE "error code"_MCI "error code"_DIGITAL "error code"_ANALOG "error code"_AUTO_"Video source" "error code"_VIDEO "error code"_S-VIDEO "error code"_YPBPR Wireless LAN is selected MCI is selected PC DVI input is selected PC Analog input is selected Video Input Mode is selected. Also, it shows source after "AUTO_" Composite Video is selected S-Video is selected Component is selected "error code"_NORMAL Normal screen size is set in Video input mode Wide screen size is set in Video input mode "error code"_WIDE "error code"_AUTO "error code"_NTSC "error code"_NTSC443 "error code"_PAL "error code"_SECAM "error code"_PAL-M "error code"_PAL-N Get selected system in Video input mode "error code"_1080I "error code"_1035I "error code"_720P "error code"_575P "error code"_480P "error code"_575I "error code"_480I "error code"_ENG "error code"_DEU "error code"_FRA "error code"_ESP "error code"_ITA Get selected language "error code"_POR "error code"_NED "error code"_SVE "error code"_JPN "error code"_KOR "error code"_CHI "error code"_ON Get ON Start setting status "error code"_OFF "error code"_ON Get Power management setting status "error code"_OFF "error code"_ON Get signal status "error code"_OFF "error code"_ON Get Blue Back setting status "error code"_OFF "error code"_ON Get Display setting status "error code"_OFF "error code"_ON Get Logo setting status "error code"_OFF "error code"_ON Get No Show setting status "error code"_OFF "error code"_ON Get Freeze setting status "error code"_OFF "error code"_ON Get Presentation timer status "error code"_STOP "error code"_OFF "error code"_001 Get selected remote control code "error code"_002 Auto is selected NTSC is selected NTSC443 is selected PAL is selected SECAM is selected PAL-M is selected PAL-N is selected 1080i is selected 1035i is selected 720p is selected 575p is selected 480p is selected 575i is selected 480i is selected English is selected German is selected French is selected Spanish is selected Italian is selected Portuguese is selected Dutch is selected Swedish is selected Japanese is selected Korean is selected. Chinese is selected "ON Start" is ON "ON Start" is OFF Power management setting status is ON Power management setting status is OFF Signal is ON Signal is OFF Blue Back is ON Blue Back is OFF Display is ON Display is OFF Logo is ON Logo is OFF No show is ON No show is OFF Freeze is ON Freeze is OFF Presentation timer is ON Presentation time is pause Presentation timer is OFF Remote control code 1 is selected Remote control code 2 is selected status read command LV-7355/7350 item CR_FANSPEED Get FAN CONTROL SPEED status CR_PROJH Get total projector running time status "error code"_MAX "error code"_NOR "error code"_nnnnnnn ( MK8P) status details FAN CONTROL SPEED is Max FAN CONTROL SPEED is Normal Total running time( 0000000 ~ 0065535)