Transcript
DM220 Stand-mount/Bookshelf loudspeaker system Product Summary ● All the distinctive qualities of the DM110 with a third driver extending both frequencies response and power handling. ● Total spectrum capability – pop, jazz, rock or classical. And of course the benefits of B&W’s advanced optimisation techniques in the design enclosure. Alvin Gold said “the sense of vividness and expressive nature of the 220 is further proof that B&W have got most of the right answers” Technical highlights ● Refinements in the enclosure give the DM series reduced in lower mid-band coloration and a dramatic improvement in transient response. ● Advanced optimisation techniques employing modal analysis of the cabinet structure were a design feature of the enclosure in all four monitors. Drive Units 1 x 26mm dome/coil construction of Power Handling 10W – 100W special polymide material Dimensions Height: 680mm Width: 290mm 2 x 200mm nominal piston dia and 26mm high temperature voice coil with Depth: 320mm Finish American Walnut or Black Ash vinyl critically impregnated composite short fibre cone Frequency Response ± 3dB 53Hz to 20kHz Sensitivity 90dB (2.83V, 1m) B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged. www.bwspeakers.com