Download Beckett Jets 1000 User's Manual

BURNERS
115 / 230 Volt Oil Burners
• .4 to 3 GPH firing rate
• 6-1/4" Blower fan
115V and 230V
• 3450 RPM
Pump/blower motor
Oil Burners
• Solid state ignition
• Beckett “CleanCut” fuel
pump with oil valve
• Air tube 2-3/4"
• UL recognized
• .75 to 3 GPH firing rates
• Solid state ignition (Low Amp)
• High volume 6-1/4" blower on 220V unit,
5-3/16" blower on 110V unit
• 3450 RPM pump/blower motor
• “A” – type SUNTEC fuel pump
• 3-3/4" air tube with adjustable flange
for maximum versatility
• UL recognized
115 / 230 Volt
Part No.
Description
307032
307036
Beckett AFG 115
Beckett AFG 230
• 12 Volt solid state ignitor
• 3450 RPM fuel pump
• .5 to 2.75 GPH
Capacity with oil valve
12 Volt
12 Volt DC Oil Burner
• 12 Volt
solid state ignition
• 1/6 HP
• 3450 RPM
• 4-1/4" Fan
• Beckett “CleanCut” fuel
pump with oil valve
Part No.
Description
307000
307003
307007*
115V AC Burner w/ Oil Valve
230V AC Burner w/ Oil Valve
12V DC Burner w/ Oil Valve
*Proper operation requires an engine with 16+ Amp alternator and deep cycle battery
on nightly, overnight recharge
Electrode / Insulator Assembly
Part No.
Description
Oil Electric
Valve
Eye
Motor
RPM
307059
307061
Beckett 14V
Beckett 13.5V
Yes
Yes
3100
3100
–
Yes
NOTE: Proper operation requires an engine with 16+ Amp alternator and deep cycle battery
on nightly, overnight recharge
Blower Wheels
Part No.
Beckett
Part No.
079534
079535
079536
079548
5780
5940
5781
578728
Description
Std to 9"
Std to 9"
Std to 9"
AC,A,F,SR, SM
MB/MD
A&S
ADC
Beckett Misc. Parts
Part No.
Beckett
Part No.
Description
079513
079515
079517
079518
2288U
2383U
2999U
21404
5-3/4D x 3-7/16W
6-1/4D x 3-7/16W
4-1/4D x 2-1/2WAFG
4-1/4D x 2-7/16W
SF-SM
SR
ADC
Flex Couplings
78
Part No.
Beckett
Part No.
Description
079520
079521
079522
079523
079524
2454
2290
2433
21282
21405
Flex Coupling 5/16 "A"
Flex Coupling 7/16 "S"
Flex Coupling 5/16 "S"
Flex Coupling 7/16 "A"
Flex Coupling 12 VDC
(M/A)
(J/H)
(M/A)
(J/H)
Part No.
Beckett
Part No.
Description
079530
079542
079543
079560
079562
079592
079595
079677
079674
079654
079684
079675
079629
079573
079566
149
5432
5850
3616
3416
5877
5717 (51400)
51304
31404
7006U
7350U
3245
AF90
5151501
51568
Electrode Clamps (ALL)
Flange, w/ Gasket (ALL)
Flange, Split UnI A&S
Gasket, Universal AMF
Gasket, Unit Mtg
Burner Housing AFG/ADC
Knurled Nut Kit ADC
Transf Mtg Gasket AFG
Transformer Clip
Cadcell Flame det
Primary Control
Transformer Spring
Air Tube w/o Head
Air Band (3 x 92 AFG)
Brush Kit 12V ADC
BURNERS
Burner Motors
48M
Part No.
079602
079605
079607
079608
079613
079615
079021
RPM
HP
Flange
Voltage
Wayne / Beckett
3450
3450
3450
3450
3450
3450
4500
1/7
1/4
1/6
1/7
1/6
1/5
1/5
48M
48N
48M
48M
48M
48M
48M
115V
12V
14VDC
240V
13.5V
115/240V
12VDC
20627 / 2456U
N/A / 21539-SDC
N/A / 21416U-ADC
20892 / 21174
21699U
N/A / 21345
21993-005 / N/A
3450
1/4
48N
3450
1/4
48N
3450
1/5
48N
3450
1/5
48N
Kit, 12VDC/MET to Fasco
115V
115/240V
240V
115V
N/A / 2364U
N/A / 21344
21328 / 2899
20554 / 2900
3450
3450
110-60 Hz
110/240V
Capacitor Start
48N
079604
079609
079611
079612
079021X
Universal
079022
079025
Blower Wheel
1/7
1/5
48M
48N
Wayne Burner Parts
Part No.
Wayne
Part No.
Description
079005
079006
078999
079003
079003A
20288/SER
21854/SER
20673
21427/SER3
21427
5-3/16" x 3-7/16"
6-1/4" x 4-3/16"
4-1/4" x 3-1/8"
12V (Fasco)
(MET)
Part No.
079056
079052
Common Parts - Beckett & Wayne
Oil Line
Brass Elbow
Part No.
Description
079526
079058
079525
079066
079067
079020
079051
Oil Line, 6.5", Copper
Oil Line, 8", Copper
Oil Line, 9.5", Copper
Brass 90° Elbow 1/8" flare, 1/8" MPT
Brass 90° Elbow 3/16 flare, 1/8" MPT
Oil Pressure Gauge 0 - 200 PSI
(28737-1) Nozzle Adapter
079024
079034
078785
079014
079016
079059
079060
079010
079011
079004
079007
078979
078752
Wayne
Part No.
31156
14733-001
14734-002
12945
14344
12484
4725
2689
13279
13360
13038
2668
2669
31702-014
Description
Burner Tune-up Kit
Electrode Assembly (Pair)
with Buss Bars – G shape
Buss Bar – G shape
Burner Gasket
Universal Gasket
Burner Housing (E-Series)
Burner Flange “F”
Flex Coupler A Fuel Unit
Coupler End (J Pump 7/16")
Trans Clip Screw
Trans Clip
Outer Air Band (8 Hole)
Inner Air Band (8 Hole)
Gun Assy, F/307007
Nozzle Adapter w/legs MSR/DC
Fuel Conditioner & Soot Remover
Red Devil eliminates soot buildup.
• Easy to use – just add to burner fuel
• Keeps burner at top efficiency
Part No.
Description
112057
112059
Pint (16 oz.)
Quart
See page 93 for Oil-Fired Hot Box
79
BURNERS
Burner Transformers
•
•
•
•
Burner Transformers
•
•
•
•
10,000 Volt spark
2.2 Amp @ 120V
8.5 lbs
Traditional copper wire wound
Part No.
Beckett
Part No.
Mounting
079668
079662
079665
079672
079673
51343U
21376U
21176U
21346
31488BK
AFG
230V
S-SF-SR-SM
120V
SM
240V
AFG
120/240V
Adapter Plate; AFG to SM
Volt
10,000 Volt spark
2.2 Amp @ 120V
8.5 lbs
FranceFormer
Part No.
Wayne
Part No.
Mounting
079115
079117
079123
079124
23101/E
23101/M
23103/E
23103/M
Side/EH-EHA
Back/M-MSR
Side/EH-EH
10KVA/Side
Volt
120V
120V
230V
120V
Burner Ignitors
Burner Ignitors
•
•
•
•
•
•
•
•
Solid State Technology
14,000 Volt spark
Only .35 Amp @ 110V
1.7 lbs
Part No.
Beckett
Part No.
Mounting
079669
079671
079670*
079707
079682
079687
51501U
51524U
51499U
51506U
51824U
51779U
AFG/Lo Amp
ADCw/o CB
ADCw/ CB
SDCw/ Con BD
SDC
SDCw/o CB
Volt
115V
12VDC
12VDC
12VDC
120V
Solid State Technology
14,000 Volt spark
Only .35 Amp @ 120V
1.7 lbs
Part No.
Wayne
Part No.
Mounting
079111
079113
079107
079109
079120
079152
101122/001
101121/001
31813-002
31812-002
31812-003
31813003
Side/EH-EHA, France
Back/M-MSR, France
Side/EH-EHA, Allanson
Back/M-MSR
Rear Mount, Carlon
Side Mount(E)
Volt
120V
120V
220V
220V
12V
12V
*complete with Timer
Base Plates for Transformers
& Ignitors
80
Part No.
Description
079644
079645
079646
079647
A, Trans/Ign
S, Trans/Ign
E, Trans/Ign
M, Trans/Ign
12 VDC KIP Fuel Solenoid Valve
•
•
•
•
•
Part No.
Description
079652
Fuel Solenoid Valve
Brass body
12V DC coil
1/8" FPT I/O ports
Conduit connector
5/64" orifice = 6 watt
BURNERS
Oil Solenoid Valve
CleanCut Fuel Pump
•
•
•
•
Part No.
Description
079062
079063
079064
079125
079126
079053X
079054X
079050X
079096
079097
079098
079099
079047
110V Oil Valve - R642
220V Oil Valve - R753
12/24V Oil Valve - R261
Flow Thru Connector Bolt
Aluminum Seal Washer
110V Coil w/ Cord Set
230V Coil w/ Cord Set
12/24 Coil w/ Cord Set
115V Coil w/o Cord Set
230V Coil w/o Cord Set
12/24VDC Coil w/o Cord Set
Cord Set Only
8mm Nut for Old Style Coil
Unitized mounting on Suntec fuel pumps
1/8" FPT Inlet
300 PSI
Uses standard SUNTEC coil
Simple design provides faster cleaning, more reliable cut offs, and cut ons.
Cleaner operation-less soot. More reliable-fewer moving parts. Reduced motor
load in start up. Higher capacity - 4 GPM at 100 PSI.
•
•
•
•
Part No.
Description
079641
079642
079643
110 Volt
220 Volt
12 Volt
100-200 PSI - Factory set 100 PSI
Inlet pressure 10 PSI
Rated speed 3600 RPM
Includes built in solenoid w/ cord set
Insulation & Rigid Disc / Donuts
Refractory Grade Ceramic Kawool Formed; retains heat inside coil for better fuel
efficiency and paint protection.
Fuel Pumps
• Use with single or dual line systems
• Pressure adjustment valve
Part No.
Standard Pumps
079030
A2VA7116
3
3450
079031
A1VA7112
3
1725
079033
A2VC7118
3
3450
079036
A1YA7912
7
1725
079037
A2YA7916
7
3450
079028
A2RA7710
Pumps with Solenoid
079038
A2VA2116 w/12V
3450
079038-110 A2VA2116 w/110V 3
3450
079038-220 A2VA2116 w/220V 3
3450
Pump Replacement Parts
079044
3715732 Pump Fuel Screen
(A2VA 7116)
079055
3715744 Pump Fuel Screen
(A2AVA 7916)
079045
3779801 Gasket Cover
079164
Lip Seal
RH
RH
LH
RH
RH
RH
RH
RH
RH
Part No.
Description
Thickness
“Rigid Formed” Donut & Discs
122253
Donut
.88"
122258
Donut
.88"
122254
Disc
1/2"
122257
Disc
1/2"
Insulation Blanket
122204
Coil Wrap
1"
122205
Coil Wrap
1"
122206
Coil Wrap
1"
122222
Full Roll
1/2"
122225
Full Roll
1"
Width
Length
18"
16"
18"
16"
6"/4.4"
6"/4.4"
24"
24"
24"
24"
24"
4'
5'
6'
37.5'
25'
Smoke Tester - Diagnostic Tool
The smoke tester gives you the ability to measure smoke (soot) density
and adjust air flow and fuel pressure to optimize burner performance.
A properly tuned burner:
• Heats water more efficiently
• Doesn’t build up soot in the coil
• Doesn’t pollute the air
• Keeps your customers happy
• A tool that should be used
by every serviceman in the industry.
Part No.
Description
449020
449019
Smoke Tester
Filter Paper Refill*
*40 sheet (10 tests per sheet)
81
BURNERS
Delavan Fuel Nozzles
Select proper size for maximum burner efficiency.
GPH
Part No.
GPH
079477
079479
079480
079481
079482
079483
2.00 x 60°W
1.65 x 80°W
1.50 x 80°W
1.75 x 80°W
2.00 x 80°W
2.25 x 80°W
079484
079486
079487
079490
079505
079492
2.50 x 80°W
2.75 x 80°W
3.00 x 80°W
4.00 x 80°W
1.65 x 90°W
2.00 x 90°W
NOTE: The above “W”
Nozzles are stocked.
All Sizes Are Available
.50
.60
.65
.75
.85
.90
1.00
1.10
1.20
1.25
1.35
1.50
1.65
1.75
2.00
2.25
2.50
2.75
3.00
3.25
3.50
4.00
5.00
6.00
6.50
7.00
8.00
60° A
Hollow
60° B
Solid
70° A
Hollow
079225
079250
079275
70° B
Solid
079227
079229
079230
079231
079232
079233
079234
079235
079236
079237
079238
079239
079240
079241
079242
079253
079254
079255
079256
079257
079258
079259
079260
079261
079262
079263
079265
079266
079267
079303
079281
079306
079283
079309
079310
079286
079288
079313
079314
079315
079291
079293
079294
079244
079270
80° A
Hollow
079325
079326
079327
079328
079329
079330
079331
079332
079333
079334
079335
079336
079337
079338
079339
079340
079341
079342
079343
079345
079346
90° A
Hollow
079351
079352
079353
079354
079355
079356
079357
079358
079359
079360
079361
079362
079363
079364
079365
079366
079367
079368
079369
079370
079371
079373A
079374
079372
079376
079377
079378
90° B
Solid
079400
079380
079381
079382
079384
079385
079386
079387
079388
079389
079390
079391
079392
079393
079394
079395
079396
079398
079403
079404
079406
079407
079409
079410
079411
079412
079413
079414
079415
079416
079417
079418
079419
079420
079421
079425
079324
“Snap” Fuel Nozzle Check Valve
Cycle Pilot
Spring loaded “snap” check valve replaces filter element on fuel nozzle. Valve
opens when fuel pump pressure reaches 130 PSI and “snaps” shut when fuel
pressure drops below 130 PSI. Stops “smokey” burners at start up and eliminates
“shut down” after burn.
Gas Auto Relight Kits. Eliminate standing pilot in gas burners with a cycle pilot
relight kit. Retro Fit Kit includes: Gas valve, flame sensor, electrode pilot relight
and harness.
• Reduces nozzle fouling caused
by residual fuel in orifice
• Easy field installation in standard fuel nozzles
• Reduces soot build up in coil
Part No.
Description
079210
079211
079215
079214
Snap Fuel Valve, 100 PSI
Snap Fuel Valve, 130 PSI
Snap Check Valve, 130 PSI (5 pack)
Snap Check Valve, 100 PSI (5 pack)
Nozzle Accessories
82
80° B
Solid
Part No.
Description
079221
Nozzle Tray (Metal)
(Open Top, 55-Compartment, Plastic)
Part No.
Description
347425
347418
347379
347416
347440
347446
24V Retrofit Kit (NG) 100,000 BTU
24V Retrofit Kit (NG) 335,000 BTU
24V Retrofit Kit (NG) 720,000 BTU
Cycle Pilot Control (347425) 24V
Cycle Pilot Control 120V
Gas Ignition Electrode (24" Lead)
BURNERS
Gas Burner Rings - N /G or L /P Gas Jets
1" Gas Valves by Robert Shaw
The Standard for Gas-Fired Pressure Washers. Impinged Jet Burner Rings offer
the most efficient utilization of gas for heating water.
Universal type for new equipment or replacement.
•
•
•
•
•
Manual gas cock
Auto pilot safety valve
Wiring & hardware included
Pilot gas filter
600,000 BTU LP gas
720,000 BTU Natural Gas
• 1" inlet/outlet
Gas Burner Ring
Part No.
Model
No.
Gas Burner Rings Only
347502
Z-21
347504
X-11
347506
X-44
347508
X-66
347510
X-88
Jets
Req’d
1000
BTUH
20
32
44
66
88
100-200
160-320
220-440
330-660
440-880
Part No.
Description
347406
347407
347403
347409
240 Vac/NG, Standing Pilot
24 Vac, NG, Standing Pilot
24 Vac, NG, Electronic Ignition
700 MV, Natural Gas
Model No.
LP Conversion Kit below
LP Conversion Kit for Robert Shaw
Gas Jets
Part No.
Drill
Size
Orifice
Size
Use
Gas Jets for Burner Rings* (above)
347552
#52
(.0635)
347554
#54
(.055)
347562
#62
(.038)
347565
#65
(.035)
347566
#66
(.033)
347549
Blank (Must Be Drilled)
Convert NG to LP
NG
NG
LP
LP
LP
*Due to freight damage on assembled rings / jets…Separately order correct number & size of jets
for each burner ring.
Gas Valves - LP or Natural
Universal type for building new systems or field replacement. 750 MV, 24V
or 120V Controls by White-Rodgers.
Part No.
Description
347421
347380
1" LP Conversion Kit
LP Orifice
Gas Valve Accessory Components
Use with both 3/4" and 1" models above.
• 335,000 BTU max
• 3/4" inlet/outlet
• All adjustments & wiring
connections on top of valve
• Automatic outlet pressure regulator
• A.G.A. design certified, C.G.A. certified
347436
Part No.
Description
347400
347410
347412
347423
Gas Valve 24V (1)
Gas Valve 120V (2)
Gas Valve 750 MV (1)
3/4" LP Conversion Kit
Model No.
Part No.
Description
347430
347431
347436
347438
750 MV Generator
P110T Pilot Burner (Natural gas)
Thermo Couple (w/ 24") Cap Tube
Thermo Couple (w/ 36") Cap Tube
(1) Includes two 3/4" x 1/2" all-thread plated bushings and valve instructions.
(2) Includes L.P. Kit, two 3/4" x 1/2" and one 1/2" x 3/8" all-thread plated bushings
and all instructions.
83