Download Avaya X.25 User's Manual

Configuring X.25 Services
Parameter:
RPOA Selection
Default:
OFF
Options:
ON | OFF
Function:
Instructions:
MIB Object ID:
Enables the recognized private operating agencies (RPOA) selection
facility on this interface. When you enable this parameter, the router can
accept incoming calls with this facility; the router accepts both RPOA
Basic format and Extended format.
To enable the RPOA facility, set this parameter to ON.
1.3.6.1.4.1.18.3.5.9.4.5.1.26
Note: When this parameter is set to ON, the router accepts calls with the
RPOA facility, but it does not validate them.
Parameter:
Default:
OFF
Options:
ON | OFF
Function:
Instructions:
MIB Object ID:
Parameter:
Specifies whether this packet layer accepts incoming calls with charging
information; however, the packet layer does not collect any charging
information.
To enable the charging information facility, set this parameter to ON.
1.3.6.1.4.1.18.3.5.9.4.5.1.27
Transit Delay
Default:
OFF
Options:
ON | OFF
Function:
Instructions:
MIB Object ID:
4-50
Charging Information
Specifies whether this packet layer accepts incoming calls with transit
delay. Note that the router does not send outgoing calls with transit delay.
To enable transit delay, set this parameter to ON.
1.3.6.1.4.1.18.3.5.9.4.5.1.28