Download ASUS RS100-E5-PI2 User's Manual

3.
Secure the chassis fans with two
screws.
Chassis fan screws
4. Connect the chassis fans cable to the onboard fan connectors labeled
CPU_FAN1 and FRNT_FAN1. Refer to the illustration below for the location
of CPU_FAN1 and FRNT_FAN1 connectors.
GND
FANPWR2
FAN PWM
CPU_FAN1
®
P5BV-M/RS100-E5
FRNT_FAN1
FAN PWM
FANPWR2
GND
P5BV-M/RS100-E5 CPU/Chassis Fan Connectors
2.5.2
Installing Serial ATA drives
You can install up to two (2) Serial ATA hard disk drives to the system. Follow the
succeeding instructions to install each of the drives.
To install primary Serial ATA drive:
1.
Locate the Serial ATA drive bay
beside the power supply unit.
Notice the four standard screw
holes.
ASUS RS100-E5-PI2
2-13