Download ASUS SABERTOOTHZ87 User's Manual

3.6.8
APM
ErP Ready [Disabled]
Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Configuration options: [Disabled] [Enabled (S4+S5] [Enabled (S5)]
Restore AC Power Loss [Power Off]
[Power On]
The system goes into ON state after an AC power loss.
[Last State]
The system goes into either OFF or ON state, whatever the system state
was before the AC power loss.
[Power Off]
The system goes into OFF state after an AC power loss.
Power On By PCIE/PCI [Disabled]
[Disabled]
[Enabled]
Disables the PCIE/PCI devices to generate a wake-on-LAN feature of the
Intel®/Realtek LAN device or other installed PCIE LAN devices.
Enables the PCIE/PCI devices to generate a wake-on-LAN feature of the
Intel®/Realtek LAN device or other installed PCIE LAN devices..
Power On By RTC [Disabled]
[Disabled]
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
Minute/Second will become user-configurable with set values.
Chapter 3
[Enabled]
ASUS SABERTOOTH Z87
3-37