Download Asahi Pentax WG-10 Quick Guide

Checking the Contents of the Package
Names of Parts and Monitor Indicators
Check that your camera comes complete with
the items listed below.
Front
Camera (PENTAX WG-10)
Monitor Indicators
Shutter release button
Power switch/Power lamp (green)
Software (CD-ROM)
S-SW136
Following indicators are displayed in the still picture capture mode.
Normal display in the Still Picture Capture Mode
Flash
Lens
Speaker/Microphone
Remote control
receiver
USB cable (I-USB7)
Rechargeable lithium-ion
battery (D-LI92)
Back
Self timer lamp/
Focus assist
Macro light
Terminal cover
lock lever
Display
Tripod socket
Terminal cover
Battery charger (D-BC92)
Thank you for purchasing this PENTAX digital camera.
The PENTAX WG-10 is waterproof, dustproof, and
shockproof, as shown below, so you can use it in a wide
range of outdoor activities.
Waterproof/dustproof: JIS grade 8 waterproof and grade 6
dustproof (IP68)
Shockproof: Satisfies PENTAX drop test (1.5 m height
onto a 5 cm thick plywood surface) complying with
MIL-Standard 810F Method 516.5-Shock testing.
* Waterproof performance is not guaranteed if the camera
is exposed to impact such as being dropped or hit.
* The camera is not guaranteed to be free of trouble or
damage under every condition.
1
Preparing the Camera for Use
Prepare your camera for use before you begin
using it.
Attaching the
Strap
Battery/card cover
lock lever
Battery/card cover
AC plug cord
Install the battery and SD
Memory Card as shown in
the illustration.
PC/AV terminal
2
Strap (O-ST104)
Macro stand (O-MS1)
Operating Manual
Quick Guide (this guide)
In this Quick Guide,
the arrow keys to
be pressed are
indicated as shown
on the right.
Battery/card
cover lock lever
SD Memory Card socket
SD Memory Card
Press the power switch.
3
The camera turns on and is ready to take
still pictures. Press the power switch
again to turn the camera off.
In locations where the camera is exposed to water or dirt
such as underwater, at the beach, in a kitchen, etc., make
sure that the battery/card and terminal cover lock levers are
firmly locked so that they won't open unexpectedly. Do not
open the covers in such locations.
When removing the battery or card, avoid surroundings where
the camera may be exposed to water or dirt, and make sure the
camera, battery, card, and your hands are completely dry.
2
02/02/'13 14:25
38
Focus frame
D-Range Setting
World Time setting
Remaining image
No icon
storage capacity
2
4
5
3
Date and
time
: Hometown
: Destination
Battery Level Indicator
Screen Display
(green)
(green)
(yellow)
(red)
[Battery depleted]
Press the four-way controller (3) to
move the frame to [W Hometown].
Initial Setting
indicator on the display.
Battery Status
Adequate power remains.
Battery is running low.
Battery is running very low.
Battery is exhausted.
The camera turns off after this message appears.
Hometown
New York
DST
MENU
Cancel
OK
11
Press the four-way controller (5), then press the four-way
controller (3) to move the frame to [Date].
12
Press the four-way controller (5) to select [01] (month), [01]
(day) or [2013] (year), then use the four-way controller (23)
to set the current date and time.
Cancel
OK
13
Press the four-way controller (5), then press the four-way
controller (3) to move the frame to [Time].
OK
5
Use the four-way controller (45) to
choose a city.
14
6
Press the four-way controller (3) to move the frame to [DST]
(Daylight Saving Time).
Set the time in the same manner as in 12 . Then press the
four-way controller (5).
15
Press the four-way controller (3)
to select [Settings complete] and
press the 4 button.
7
MENU
Press the four-way controller (5) to select [24h], then use
the four-way controller (23) to select [24h] (24-hour
display) or [12h] (12-hour display).
Cancel
City
Use the four-way controller
(2345) to select the desired
language.
Press the 4 button.
The [Initial Setting] screen
appears.
DST
OFF
OF
Settings complete
Press the four-way controller (5).
The [W Hometown] screen appears.
10
English
Hometown
New York
The [Language/
] screen appears when the camera is turned on for
the first time. Select the desired language and then set the date and time.
1
The inside of the battery/card and terminal covers are not waterproof
+1.0
1/250
F3.5
You can check the battery level by the
Make the Initial Settings.
Battery
lock lever
Battery
DATE
Turning the Camera On
4
* The SD Memory Card is sold separately.
2012/12/14　11:41:28　Illustrator 15.0.2　KB546_QG_EN_Omote_10e.eps
Battery lock lever
HDMI terminal
Eye-Fi communication status
Digital zoom icon
P
SD Memory Card
Card is write-protected
MENU
Battery/
card cover
Focus mode
Built-in memory
(without card)
Attach the strap supplied
with the camera as shown
in the illustration.
Installing the Battery
and SD Memory Card
Drive mode
Flash mode
Shooting mode
Battery level
Face Detection
Date imprint
setting
EV
compensation
Shutter speed
Aperture
Camera shake
reduction
Memory status
OK
Use the four-way controller (45) to select O or P and press
the 4 button.
The [Initial Setting] screen reappears.
Date Adjustment
Date Format
mm/dd/yy 24h
Date
01/01/2013
Time
MENU
Memo
If you accidentally select the wrong
language and press the 4 button,
press the four-way controller (5), use
the four-way controller (2345) to
select the desired language, and then
press the 4 button. The [Initial
Setting] screen appears in the selected
language.
8
Initial Setting
English
Hometown
New York
Settings complete
MENU
Cancel
DST
OFF
OF
9
Press the four-way controller (3) to select [Settings complete]
and press the 4 button.
The [Date Adjustment] screen appears.
Press the four-way controller
(5) to select [mm/dd/yy], then
use the four-way controller
(23) to choose the date
format.
Date Adjustment
Date Format
mm/dd/yy 24h
Date
01/01/2013
Time
00:00
Settings complete
MENU
Cancel
00:00
Settings complete
Cancel
OK
Formatting an SD Memory Card
Use this camera to format (initialize) an SD Memory Card that is
unused or has been used on another camera or digital device.
Be aware that formatting will delete all the data stored in the SD
Memory Card. For how to format an SD Memory Card, refer to
the Operating Manual (p. 214).
Continue on the reverse side.
OK
3
Taking Pictures
Aim the camera at the subject, then press the shutter release button. The flash discharges automatically depending on the brightness.
1
Frame the subject using the focus frame on the display.
2
Press the w/xbutton to change the captured area.
Selecting the Flash Mode
Each time you press the four-way controller (4), the flash mode switches
between the following modes.
Auto
Flash Off
Memo
The functions available in Capture mode may be different.
You can select Z (2 sec. Self-timer) by pressing the four-way
controller (3) and then (5) after selecting g (10 sec. Self-timer).
You can select h (0-sec Remote Control) by pressing the four-way
controller (3) and then (5) after selecting i (3-sec Remote
Control).
For details, refer to the Operating Manual (p.94 - 101).
Selecting a Shooting Mode
You can choose the right mode for your particular situation
from the Capture Mode Palette.
Press the four-way controller (3).
Flash On
Auto + Red-eye
Flash On + Red-eye
Widens the area
that is captured
by the camera
3
4
Enlarges
the subject
Press the shutter release button halfway.
The focus frame on the display turns green if the
subject is in focus.
Press the shutter
release button fully.
Selecting the Focus Mode
Each time you press the four-way controller (
between the following modes.
Memo
The functions available in Capture mode may be different.
For details, refer to the Operating Manual (p.108).
38
3-sec Remote Control
4
The monitor display in 16:9 aspect ratio
When [Recorded Pixels] is set to i/
/
/h
in [A Rec. Mode], the aspect ratio of the image is 16:9 and the
monitor display for recording and playback is as shown below.
For details on how to select the Recorded Pixels, refer to the
Operating Manual (p.116).
Playing Back Images
OK
Memo
Pan Focus
An explanation appears when you select the shooting mode.
Infinity
Manual Focus
Memo
For details, refer to the Operating Manual (p.110).
Selecting a Playback Mode
1
Play back the image you want to delete.
2
Press thei button.
You can choose the playback function
you want to use with the Playback
Mode Palette.
Press the four-way controller (3) while
an image is displayed in playback mode.
The confirmation screen appears.
Press the Q button after taking a picture.
The image appears on the display.
OK
Use the four-way controller (2345)
to choose a shooting mode, then
press the OK button.
Playing Back Images
You can play back the images taken on the display.
1
MENU Cancel
1cm Macro
Standard (single-frame)
10 sec. Self-timer
For capturing landscape
views. Enhances colors
of sky and foliage
Macro
Each time you press the four-way controller (2), the drive mode switches
between the following modes.
1/250
F4.6
), the focus mode switches
Standard
Selecting the Drive Mode
The picture is taken.
1/2
Landscape
3
Use the four-way controller (2) to select [Delete].
10 - 0038
100
003
For details about how
to use the PENTAX
WG-10 or instructions
on connecting the
camera to a computer,
refer to the manual
below.
1/2
Slideshow
100-0017
100-001
P
For continuously playing
back images. Screen or
sound effects can be set
Delete
Cancel
Edit
38
Memo
To play back the previous or next image, press the four-way
controller (45).
Pressing f on the f/y button during playback displays 6
thumbnail images. Pressing f again in 6-image display switches
to 12-image display. Pressing f yet again switches to folder or
calendar display. For details, refer to the Operating Manual
(p.153).
Deleting Images
MENU Cancel
OK
4
OK
Press the OK button.
Memo
You can delete several images selected from the 6- or 12-image
display. For details, refer to the Operating Manual (p.167).
You can delete all images at once. For details, refer to the
Operating Manual (p.168).
You can protect stored images from being accidentally deleted.
For details, refer to the Operating Manual (p.169).
OK
OK
Use the four-way controller (2345)
to choose a playback mode, then
press the OK button.
PENTAX WG-10
Operating Manual
Memo
An explanation appears when you
select the playback mode.
PENTAX RICOH IMAGING CO., LTD.
http://www.pentax.jp
PENTAX RICOH IMAGING FRANCE S.A.S.
(European Headquarters)
HQ
http://www.pentax.eu
http://www.pentax.fr
France
Deleting a Single Image
PENTAX RICOH IMAGING DEUTSCHLAND GmbH
http://www.pentax.de
You can delete the currently displayed image.
PENTAX RICOH IMAGING UK LTD.
http://www.pentax.co.uk
PENTAX RICOH IMAGING
AMERICAS CORPORATION
http://www.pentaximaging.com
PENTAX RICOH IMAGING CANADA INC.
http://www.pentax.ca
PENTAX RICOH IMAGING CHINA CO., LTD.
http://www.pentax.com.cn
54768
Printed in Indonesia R01BAA13