Download American Standard Trap Standards 7798.020 User's Manual
Transcript
TRAP STANDARDS ENAMELED CAST IRON TRAP STANDARDS ❏ 7798.020 2" iron pipe with cleanout plug and strainer ❏ 7798.030 3" iron pipe with cleanout plug and strainer Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.1 for Cast Iron Plumbing Fixture 7798.020 / .030 IS FOR ENAMELED IRON SERVICE SINK WASHER 102mm (4) REMOVABLE PERFORATED GRID MAX. 25mm (1) MIN. 8mm (5/16) 2.882 X 11-1/2 3mm (1/8) 117mm (4-5/8) DIA. 127mm (5) 3 N.P.T. INSIDE THREADS FOR 7798.030 2 N.P.T. INSIDE THREADS FOR 7798.020 C/L OF OUTLET 381mm (15) 51mm (2) SEAL 67mm(2-5/8) SEAL WHEN OUTLET THREADED 51mm(2) 108mm (4-1/4) 267mm (10-1/2) 152mm (6) DIA. FINISHED FLOOR IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. © 2008 AS America Inc. M37 Revised 12/03 © 2008 AS America Inc. M38