Transcript
ACCESSORIES: SURFACE, WALL & TREE MOUNTS ` LUMIERE ® DESCRIPTION Lumière offers a variety of surface, wall and tree mounting accessories. All are equipped with standard 1/2" NPS threaded mounting hole to accept fixtures with 1/2" NPS threaded stems. Surface and wall mounts are constructed from die-cast aluminum, double protected by a chromate conversion undercoating and polyester powdercoat paint finish. Specify color (BK, BZ, CS, VE, WT). Tree mounts are constructed from stainless steel. Specify finish (NSS, BZ). FS1-xx* TM05-xx* 2-7/8" x 4-5/8" (73mm x 117mm) Rectangular wall plate or box cover with single fixture mounting hole. For use with Lumière's MB1 junction box or rectangular junction/wall boxes by others. Specify finish (BK, BZ, CS, VE, WT). 3-7/8" x 2" (98mm x 51mm) Rectangular tree/surface mount with selfcontained wiring compartment and through wiring passages. Specify finish (BK, BZ, CS, VE, WT). FS2-xx* TM04-xx* 2-7/8" x 4-5/8" (73mm x 117mm) Rectangular wall plate or box cover with dual mounting holes. For use with Lumière's MB1 junction box or rectangular junction/wall boxes by others. Specify finish (BK, BZ, CS, VE, WT). 2-1/2" x 4-1/4" (64mm x 108mm) Expanding tree strap with self-adjusting tension release for use with one fixture. Specify finish (BZ, NSS). RS1-xx* TM04-2-xx* ø4-1/2" (114mm) Round wall plate or box cover with single fixture mounting hole. For use with Lumière's MBR1 junction box or round junction/wall boxes by others. Specify finish (BK, BZ, CS, VE, WT). 2-1/2" x 4-1/4" (64mm x 108mm) Expanding tree strap with self-adjusting tension release for use with two fixtures. Specify finish (BZ, NSS). RS2-xx* TM04-3-xx* ø4-1/2" (114mm) Round wall plate or box cover with dual mounting holes. For use with Lumière's MBR1 junction box or round junction/wall boxes by others. Specify finish (BK, BZ, CS, VE, WT). 2-1/2" x 4-1/4" (64mm x 108mm) Expanding tree strap with self-adjusting tension release for use with three fixtures. Specify finish (BZ, NSS). TM01-xx* TM04-4-xx* ø2-3/16" x 1-1/2" (71mm x 38mm) Round mount for installing fixtures on trees, railings or other wood surfaces. Specify finish (BK, BZ, CS, VE, WT). 2-1/2" x 4-1/4" (64mm x 108mm) Expanding tree strap with self-adjusting tension release for use with four fixtures. Specify finish (BZ, NSS). *Replace xx with corresponding finish. O R D E R I N G I N F O R M AT I O N SAMPLE NUMBER: FS2-CS Order surface, wall & tree mounting accessories as separate line items. Specifiy quanities and finish. 1074 COOPER LIGHTING