Download American Standard 2722W.102 User's Manual

ROPE TWIST™
BATHING POOL
HIGH GLOSS ACRYLIC
ROPE TWIST™ BATHING POOL
with INTEGRAL APRON
❏ 2722W.102 Bathing Pool, Right Hand Outlet
❏ 2722W.202 Bathing Pool, Left Hand Outlet
Product Features:
• Stylish rope-twist design feature
•Acrylic with fiberglass reinforcement
•Integral apron design
•Integral three-sided, tiling/water retention flange
•Generous back rest
•End drain outlet
• Design coordinated to match Rope Twist
bath walls (specify walls separately)
• 17" floor to deck tub depth
• High gloss surface finish
• Limited Lifetime warranty
Nominal Dimensions:
60" x 32" x 17"
(1524 x 813 x 432mm)
Compliance Certifications Meets or Exceeds the Following Specifications:
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
To Be Specified - Required:
❏ Color: (Arctic only)
❏ Bath Filler*: (specify finish)
❏ Drain: 1640.305 (specify finish)
To Be Specified - Optional:
❏ Bath Walls: 5030W.LBW
For color/finish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
Rope Twist Bath Walls with Rope Twist Bathing Pool Shown.
Specify Walls Separately.
© 2008 AS America Inc.
H103
Revised 10/08
ROPE TWIST™
BATHING POOL
HIGH GLOSS ACRYLIC
7-3/4"
(197mm)
3/4"
(19mm)
60"
(1524mm)
70mm
(2-3/4)
FINISHED
WALL
15-1/8"
(385mm)
229mm x 305mm
(9 x 12)
FLOOR
CUTOUT
32"
(813mm)
25mm
(1) C/L OF
4-1/2"
(114mm)
DRAIN
FINISHED
WALL
TOP OF
DECK
3-1/2"
(89mm)
1"
(25mm)
SEE
NOTE
17"
(432mm)
16-3/4"
(425mm)
2"
(51mm)
ROUGH
FLOOR
1-1/2 N.P.T. THREADS
1-1/2 O.D. TAILPIECE
4-5/8"
(117mm)
BATH SUPPORT
MATERIAL
GENERAL SPECIFICATIONS FOR 2722W BATHING POOL
60 x 32 x 17 In.
(1524 x 813 x 432mm)
60 Lbs. (27 Kg)
WEIGHT
WEIGHT w/WATER
393 Lbs.(179 Kg)
40 Gal. (151 L)
GAL. TO OVERFLOW
22 x 44 In. (559 x 1118mm)
BATHING WELL AT SUMP
25.5 X 53 In.(648 x 1346mm)
BATHING WELL AT RIM
10 In. (254mm)
WATER DEPTH TO OVERFLOW
29 Lbs./Sq.Ft. (195 Kgs/Sq.m)
FLOOR LOADING
(PROJECTED AREA)
15.3
PTS.
27
CUBE (FT 3 )
INSTALLED SIZE
NOTES:
BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS (2722W.202).
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standards Z124.1 and
A112.19.7. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
© 2008 AS America Inc.
H104
Revised 3/08