Download American Standard Monterrey 7500.140 User's Manual
Transcript
MONTERREY™ TWO-HANDLE CENTERSET LAVATORY FAUCET WITH GOOSENECK SPOUT MODEL NUMBER:* 7500.170 Centerset Lavatory 1.5 gpm Pressure Compensating Aerator. Rigid/swivel gooseneck spout. Vandal-Resistant Wrist Blade handles. Less drain and pop-up hole. 7501.170 Centerset Lavatory 1.5 gpm Pressure Compensating Aerator. Rigid/swivel gooseneck spout. Vandal-Resistant Wrist Blade handles. Pop-up drain. 7502.170 Centerset Lavatory 1.5 gpm Pressure Compensating Aerator. Rigid/swivel gooseneck spout. Vandal-Resistant Wrist Blade handles. Grid strainer drain. 7500.140 Centerset Lavatory 1.5 gpm Pressure Compensating Aerator. Rigid/swivel gooseneck spout. Vandal-Resistant Lever handles. Less drain and pop-up hole. 7501.170 Shown 7501.140 Centerset Lavatory 1.5 gpm Pressure Compensating Aerator. Rigid/swivel gooseneck spout. Vandal-Resistant Lever handles. Pop-up drain. 7502.140 Centerset Lavatory 298mm (11-3/4) 1.5 gpm Pressure Compensating Aerator. Rigid/swivel gooseneck spout. Vandal-Resistant Lever handles. Grid strainer drain. 127mm (5) 98mm (3-7/8) 171mm (6-3/4) 273mm (10-3/4) 148mm 5-13/16 35mm (1-3/8) MAX. 32mm (1-1/4)DIA. MOUNTING HOLES 57mm (2-1/4) 51mm (2) 22mm (7/8) DIA. 1/2 NPSM Lever Handle 46mm (1-13/16) Gasket 102mm (4) GENERAL DESCRIPTION: PRODUCT FEATURES: Durable cast brass construction. 1/2" male threaded inlet shanks with brass shank nuts and coupling nuts. 1/4 turn ceramic disc valve cartridges. Convertible swivel/rigid spout. Choice of Vandal-Resistant Wrist Blade or Lever handles with blue & red color indexes. All brass drain bodies with 1 1/4" (32mm) tailpieces (on applicable models). 1.5 gpm/5.7L/min. maximum flow rate. Vandal-Resistant and Laminar Flow aerators are available. Pressure Compensating Aerator: Provides a constant water flow of 1.5 gpm throughout the pressure range Solid Brass Construction: Durable - Excellent in high use applications. Ideal for prolonged contact with water. Ceramic Disc Valve Cartridge: Assures a lifetime of drip-free performance. Convertible Swivel/Rigid Spout: Easily adjusted in the field. Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead requirements. SUGGESTED SPECIFICATION: 4" centerset lavatory faucet shall be cast brass construction with all brass shank nuts and coupling nuts. Shall feature water-conserving 1.5 gpm/5.7L/min. pressure compensating aerator. Vandal-Resistant handles. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Fitting shall be American Standard Model # 750_.___.002. © 2008 AS America Inc. L51 MONTERREY™ TWO-HANDLE CENTERSET LAVATORY FAUCET WITH GOOSENECK SPOUT CODES AND STANDARDS FLOW RATE* 2.0 GALLONS PER MINUTE These products meet or exceed the following codes and standards: ASME A112.18.1 CSA B 125 NSF 61/Section 9 1.5 1.0 0.5 0.0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. Finish Product Number 7500.170 7501.170 7502.170 7500.140 Polished Chrome Description 002 Centerset Lavatory with rigid/swivel gooseneck spout. 1.5 gpm/5.7L/min pressure compensating aerator. Vandal-Resistant Wrist Blade Handles. Less drain and pop-up hole. Centerset Lavatory with rigid/swivel gooseneck spout. 1.5 gpm/5.7L/min pressure compensating aerator. Vandal-Resistant Wrist Blade Handles. Pop-up drain. Centerset Lavatory with rigid/swivel gooseneck spout. 1.5 gpm/5.7L/min pressure compensating aerator. Vandal-Resistant Wrist Blade Handles. Grid strainer drain. Centerset Lavatory with rigid/swivel gooseneck spout. 1.5 gpm/5.7L/min pressure compensating aerator. Vandal-Resistant Lever Handles. Less drain and pop-up hole. 7501.140 Centerset Lavatory with rigid/swivel gooseneck spout. 1.5 gpm/5.7L/min pressure compensating aerator. Vandal-Resistant Lever Handles. Pop-up drain. 7502.140 Centerset Lavatory with rigid/swivel gooseneck spout. 1.5 gpm/5.7L/min pressure compensating aerator. Vandal-Resistant Lever Handles. Grid strainer drain. Note: For Vandal-Resistant models add "VP" following the product number. Example - 7500.170VP = Centerset Lavatory. Vandal-Resistant Wrist Blade Handles. Less drain and pop-up hole. Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged. Other Aerators Available: Part Suffix V15 L15 LV15 V05 Description 1.5 gpm Pressure Compensating Vandal-Resistant Aerator 1.5 gpm Pressure Compensating Laminar Flow Outlet 1.5 gpm Pressure Compensating Vandal-Resistant Laminar Flow Outlet 0.5 gpm Pressure Compensating Vandal-Resistant Spray © 2008 AS America Inc. L52