Download American Dryer Corp. AD-235ED User's Manual

AD-235ED Parts Manual
24 VAC Phase 5
1999/2000
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
ADC Part No. 450422
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or
other flammable vapors or liquids
in the vicinity of this or any other
appliance.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables dans le voisinage de cet
appareil ou de yout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________
MODEL NO.
AD-235ED
__________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s)
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at
(508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so
that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
Table of Contents
Locking Control Door Assembly
For Models Mfd. as of December 14, 1999 ................................................................................. 2
Control Door Assembly
For Models Mfd. prior to December 14, 1999 ............................................................................. 3
Coin Microprocessor Control Panel/Box Assemblies
For Models Mfd. as of December 2, 1999 ............................................................................... 4, 5
Coin Microprocessor Control Panel/Box Assemblies
For Models Mfd. prior to December 2, 1999 ........................................................................... 6, 7
Top Front Panel Assembly ...................................................................................................................... 8
Bottom Front Panel Assembly ................................................................................................................. 9
Main Door Switch Assembly ................................................................................................................. 10
Main Door Assembly ............................................................................................................................ 11
Basket (Tumbler)/Support Assembly ..................................................................................................... 12
Lint Drawer Assembly .......................................................................................................................... 13
Lint Drawer Switch Assembly ............................................................................................................... 14
Upper Pocket Sensor Bracket Assembly ............................................................................................... 15
Lower Pocket Sensor Bracket Assembly .............................................................................................. 16
Idler Bearing Assembly ......................................................................................................................... 17
Basket (Tumbler) Bearing Assembly ................................................................................................ 18, 19
Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ................................................... 20, 21
Direct Spark Ignition (DSI ) Gas Valve/Burner Assembly ................................................................. 22, 23
Gas Piping Assembly ............................................................................................................................ 24
Gas Burner Assembly ........................................................................................................................... 25
Sail Switch Assembly ............................................................................................................................ 26
3-Phase (3Ø) Motor, Electrical Relay Panel Assembly ........................................................................... 27
Back Guard Assembly .......................................................................................................................... 28
Exhaust Ducting Assembly .................................................................................................................... 29
Microprocessor Coin Acceptor Listing .................................................................................................. 30
Additional Parts Available ..................................................................................................................... 31
Locking Control Door Assembly
For Models Mfd. as of December 14, 1999
Illus. No.
Part No.
Qty.
1
882463
1
882464
1
882465
1
882601
1
180225
1
150201
152103
150212
160040
160140
5
4
4
1
1
2
3
4
5
6
7
2
Description
White Locking Control Door Complete
(includes illus. nos. 1, 2, and 3)
Almond Locking Control Door Complete
(includes illus. nos. 1, 2, and 3)
Blue Locking Control Door Complete
(includes illus. nos. 1, 2, and 3)
Black Trim
(for models mfd. as of December 14, 1999)
Gray Trim (29.65” length)
(for models mfd. prior to December 14, 1999)
#10-32 x 1/4” Phillips Round Head Machine Screw
Rivnut
#10-32 x 5/16” Phillips Pan Head Stainless Steel Machine Screws
ACE® Control Door Lock
ACE® Key xx4451
American Dryer Corporation
450422-3
Control Door Assembly
For Models Mfd. prior to December 14, 1999
Illus. No.
1
2
3
-450422-3
Part No.
882413
882412
882414
882415
882416
882417
150212
150309
152103
Qty.
1
1
1
1
1
1
4
4
4
Description
Almond “ADC” Control Door
White “ADC” Control Door
Blue “ADC” Control Door
White Control Door
Almond Control Door
Blue Control Door
#10-32 x 5/16” Phillips
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Rivnuts ... Not Illustrated
Telephone: (508) 678-9000 / www.amdry.com
3
Coin Microprocessor Control Panel/Box Assemblies
For Models Mfd. as of December 2, 1999
NOTE: Duplicate ALL components for right
hand side of control box.
Illus. No.
4
Part No.
Qty.
1
2
112526
882469
1
1
3
4
5
6
882472
882473
882474
160042
160136*
-------
1
1
1
1
1
1
7
881163**
1
Description
Coin Keyboard (touch pad) Label Assembly
Control Panel Assembly Less Acceptor
(includes illus. nos. 1, 2, 10, 11, and 12)
White Coin Box Complete Assembly Less Lock
Almond Coin Box Complete Assembly Less Lock
Blue Coin Box Complete Assembly Less Lock
ACE® Standard Coin Box Lock Assembly ONLY with Key
Key ONLY (for standard coin box lock)
Microprocessor Single Coin Acceptor with Optical Switch
(refer to Microprocessor Coin Acceptor Listing on page 30)
Optical Switch ONLY (Hanke)
American Dryer Corporation
450422-3
Coin Microprocessor Control Panel/Box Assemblies (continued)
For Models Mfd. as of December 2, 1999
Illus. No.
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
*
**
***
****
Part No.
Qty.
137021***
3
137023**
1
880772
1
824080
1
137213
1
824998
1
153010
2
150005
2
122706***
15
122641
1
122800
1
136057
1 or 2
150002
1 or 2
136008
1 or 2
826329
1
826326
1
150301
2
150301
2
353258
1
315028
1
826343
1
826342
1
151001
4
882699
1
882700
1
882701
1
153018
4
152013
4
Description
Microprocessor Socket ONLY
Optical Switch Connector ONLY
Single Coin Optic Switch Harness
Dual Coin Optic Switch Harness
Phase 5 Coin Controller ONLY
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
Microprocessor Socket ONLY
15-Pin Microprocessor Connector ONLY
Microprocessor (female) Pin Extraction Tool
1/2-Amp (slo blo) Fuse
#6-32 x 1” Round Head Machine Screw
3-Position Fuse Block
208/240v Transformer Assembly
115v Transformer Assembly
#8-8 x 7/16” Phillips Head TEK Screw
#8-8 x 7/16” Phillips Head TEK Screw
Rear Panel Connector Bracket
Front Electrical Panel
Electric Panel Assembly 115v
Electric Panel Assembly 208v
#8-32 Pal Nut
White Coin Vault ONLY
Almond Coin Vault ONLY
Blue Coin Vault
1/4” Flat Washer
#6-32 Hex Nut
Specify key number when ordering.
For dual coin, double the quantity.
Quantity as required.
For use on high security coin vault ONLY.
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller
(computer).
450422-3
Telephone: (508) 678-9000 / www.amdry.com
5
Top Front Panel Assembly
Illus. No.
Part No.
Qty.
1
800692*
1
2
3
4
154215
170330
881053
870011
150313
2
1
1
1
8
150309
8
400505
121405
1
5
6
Description
Right Hand Insulated Front Panel Assembly
(includes illus. nos. 1, 2, 3, and 6)
1/8” Pop Rivet
Friction Door Latch
ADC Logo (with adhesive tape)
Logo Double Tape Kit
#10-16 x 1/2” TORX Plus Screw
(for models mfd. as of October 2, 2000)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
(for models mfd. prior to October 2, 2000)
25IP TORX Plus Tip Bit (for removal of P/N 150313)
Rubber Grommet
* Specify color when ordering.
6
American Dryer Corporation
450422-3
Bottom Front Panel Assembly
Illus. No.
1
2
3
4
5
Part No.
Qty.
882418
1
882419
1
882420
1
882432
1
882433
1
882434
1
154215
170330
315187
150313
2
1
1
14
150309
6
7
450422-3
400505
121405
882602
1
1
Description
Insulated White Bottom Front Panel With Trim
(includes illus. nos. 1 through 6)
Insulated Almond Bottom Front Panel With Trim
(includes illus. nos. 1 through 6)
Insulated Blue Bottom Front Panel with Trim
(includes illus. nos. 1 through 6)
Insulated White Bottom Front Panel Assembly (without trim)
(includes 1, 2, 3, 5, and 6)
Insulated Almond Bottom Front Panel Assembly (without trim)
(includes 1, 2, 3, 5, and 6)
Insulated Blue Bottom Front Panel Assembly (without trim)
(includes 1, 2, 3, 5, and 6)
1/8” Pop Rivet
Friction Door Latch
Kick Plate Trim
#10-16 x 1/2” TORX Plus Screw
(for models mfd. as of October 2, 2000)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
(for models mfd. prior to October 2, 2000)
25IP TORX Plus Tip Bit (for removal of P/N 150313)
Rubber Grommet
Black Lower Front Panel Trim
Telephone: (508) 678-9000 / www.amdry.com
7
Main Door Switch Assembly
NOTE: Duplicate ALL components for
Lower Door Switch Assembly.
Illus. No.
8
Part No.
Qty.
1
2
3
4
5
6
152012
153008
137005
121028
154281
800448
2
2
1
2
2
1
7
8
9
10
153565
881246
150201
121405
2
1
2
1
Description
#6-32 Hex Nut
#6 Lock Washer
Single Pole Door Switch
Insulated Female Terminal
3/8” Standard Nylon Spacer
12-1/2” Stainless Steel Main Door Hinge
(includes illus. nos. 6 and 7)
#6 Stud
Main Door Switch Housing ONLY
#10-32 x 1/4” Phillips Pan Head Screw
Rubber Grommet
American Dryer Corporation
450422-3
Main Door Assembly
Illus. No.
Part No.
Qty.
1
881422
1
2
3
4
5
6
800448
150410
152014
102353
102212
170730
150448
170319
150431
4
4
1
1
1
1
4
4
1
7
8
9
450422-3
Description
Black Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9)
12-1/2” Stainless Steel Main Door Hinge Assembly
#10-24 x 3/8” Phillips Pan Head Taptite Screw
1/4-20 Free Spin Wash Nut
Main Door Gasket
20-7/16” Door Glass with Four (4) Holes
Main Door Glass Adhesive (10.3 oz. cartridge)
1/2” Stainless Steel Flat Head Allen Screw
Door Glass (nylon) Spacer
Main Door Latch Screw
(#10 x 7/16” dome hex head)
Telephone: (508) 678-9000 / www.amdry.com
9
Basket (Tumbler)/Support Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
-*
10
Part No.
Qty.
800831
1
800721*
1
800891
1
800841*
1
301315
301316
301414
301415
150518
100902
153001
154210
800617
152004
153002
153001
116003
401010
2
1
2
1
1
3
3
30
1
3
3
3
1
1
Description
Basket (tumbler) and Support Assembly Complete with Felt Collar
(includes illus. nos. 1 through 11)
Basket (tumbler) ONLY
(includes illus. nos. 1, 2, and 6)
Stainless Steel Basket (tumbler) and Support Assembly Complete
with Felt Collar
(includes illus. nos. 1 through 11)
Stainless Steel Basket (tumbler) ONLY
(includes illus. nos. 1, 2, and 6)
Short Basket (tumbler) Rib ONLY
Tall Basket (tumbler) Rib ONLY
Stainless Steel Short Basket (tumbler) Rib ONLY
Stainless Steel Tall Basket (tumbler) Rib ONLY
5/16-18 x 3/8” Socket Button Head Screw
5/16-18 x 31” Tie Rod
5/16” Flat Washer
5/32” x 3/16” Pop Rivet
Basket (tumbler) Support ONLY
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Felt Collar ONLY
#847 Adhesive For Felt Collar (5 oz. tube)
Felt collar is not included and must be ordered separately.
American Dryer Corporation
450422-3
Lint Drawer Assembly
Illus. No.
1
2
450422-3
Part No.
882421
882422
882423
882479
882480
882481
882478
Qty.
1
1
1
1
1
1
1
Description
Locking External White Lint Drawer
Locking External Almond Lint Drawer
Locking External Blue Lint Drawer
External White Lint Drawer
External Almond Lint Drawer
External Blue Lint Drawer
Lint Drawer Lock Assembly (with MK-100 key)
Telephone: (508) 678-9000 / www.amdry.com
11
Lint Drawer Switch Assembly
Illus. No.
Part No.
Qty.
1
2
--
800972
122002*
150301
1
1
1
*
12
Description
Lint Drawer Switch Box (for bottom pocket Only)
Lint Drawer Switch
#8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated
(for bottom pocket Only)
(Note: duplicate lint drawer switch for upper pocket).
American Dryer Corporation
450422-3
Upper Pocket Sensor Bracket Assembly
Illus. No.
Part No.
Qty.
1
882931
1
2
3
4
5
6
122605
122701
154007
150000
801428
1
4
2
2
1
7
8
9
10
11
-----
305107
130301
153010
152000
150301
122604
122700
122801
1
1
2
2
2
1
4
1
450422-3
Description
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 through 4)
4-Pin Socket Connector ONLY
Socket Terminal ONLY
1/4” Tinnerman Push On Fastener
#6-32 x 1/4” Round Head Machine Screw
Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 9)
Temperature Sensor Bracket ONLY
225º Manual Reset Thermostat
#6 Star Washer
#6-32 Hex Nut
#8-18 x 7/16” Phillips Pan Head TEK Screw
4-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool
Telephone: (508) 678-9000 / www.amdry.com
13
Lower Pocket Sensor Bracket Assembly
Illlus. No.
14
Part No.
Qty.
1
800770
882727
1
1
2
3
4
5
6
7
8
9
10
11
882931
130112
150000
153010
152000
150309
825092
121300
121494
154007
1
1
2
2
2
2
1
1
2
2
Description
Temperature Sensor Bracket ONLY
Temperature Sensor Bracket Complete
(includes illus. nos. 1 through 11)
Temperature Sensor Probe
225º Automatic Reset Thermostat
#6-32 x 1/4” Round Head Machine Screw
#6 Star Washer
#6-32 Hex Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Sensor Harness
Open/Closed Bushing
3/16” Push Mount Wire Tie
1/4” Tinnerman Push On Fastener
American Dryer Corporation
450422-3
Idler Bearing Assembly
Illus. No.
1
Part No.
Qty.
100111
1
100100
1
4
5
6
101129
100113
100115
154301
100705
882777
1
1
1
2
1
1
7
8
9
10
150617
153005
153004
---------
2
2
2
-
11
12
13
152004
150509
152004
1
1
1
2
3
450422-3
Description
5L-650 V-Belt (to basket [tumbler] pulley)
(for models mfd. as of March 13, 2000)
5L-660 V-Belt (to basket [tumbler] pulley)
(for models mfd. prior to March 13, 2000)
9” x 2-1/2” Pulley with 3/16” Key
4L-400 V-Belt (to motor pulley) (for 60 Hz models Only)
4L-410 V-Belt (to motor pulley) (for 50 Hz models Only)
5/16-18 x 5/16” Allen Setscrew
3/16” x 3/16” x 1-3/8” Key
Idler Bearing Assembly Complete
(includes illus. nos. 5 through 9 and 11, 12, and 13)
3/8-16 x 1” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
Direct Spark Ignition (DSI) Module Mounting Bracket
(refer to Direct Spark Ignition [DSI] Gas Valve/Burner Assembly on
page 22 and page 23)
5/16-18 Hex Nut
5/16-18 x 3” Hex Head Machine Bolt
5/16-18 Hex Nut
Telephone: (508) 678-9000 / www.amdry.com
15
Basket (Tumbler) Bearing Assembly
16
American Dryer Corporation
450422-3
Basket (Tumbler) Bearing Assembly
Illus. No.
1
2
3
4
Part No.
Qty.
880203
153005
152005
882544
1
4
4
1
882545
1
882542
882543
880202
880779
1
1
1
1
6
7
8
9
10
11
12
13
14
15
16
17
150601
153004
153004
153005
152005
154326
152004
150621
153002
153004
150501
102120
2
2
2
2
2
2
2
2
4
6
4
1
18
824807
1
19
20
21
100713
101100
100111
1
1
1
100100
1
5
450422-3
Description
1-3/8” Flange Bearing
3/8” Lock Washer
3/8-16 Hex Nut
Pillow Block Bearing Assembly Complete
(includes illus. nos. 4 through 17)
Pillow Block Bearing Assembly Complete with Rotational Sensor
(includes illus. nos. 4 through 18)
Pillow Block Bearing Platform ONLY
Pillow Block Bearing Platform ONLY
1-3/8” Pillow Block Bearing
1-3/8” Pillow Block Bearing
(for models with optional rotation sensor assembly)
3/8-16 x 2” Hex bolt
3/8” Flat Washer
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-24 x 3/8” Setscrew
5/16-18 Hex Nut
5/16-18 x 1-1/2” Tap Bolt Zinc
5/16” Lock Washer
3/8” Flat Washer
5/16-18 x 3/4” Tap Bolt Zinc
Sintered 8 Magnet
(for models with optional rotation sensor assembly)
Rotational Sensor Assembly
(for models with optional rotation sensor assembly)
1/4” x 1/4” x 1” Key
18” Pulley
5L-650 V-Belt (basket [tumbler] to idler)
(for models mfd. as of March 13, 2000)
5L-660 V-Belt (basket [tumbler] to idler)
(for models mfd. prior to March 13, 2000)
Telephone: (508) 678-9000 / www.amdry.com
17
Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
Illus. No.
1
2
3
4
5
6
18
Part No.
100604
152006
153050
100702
153050
117604
Qty.
1
2
*
1
*
4
Description
12-1/2” Impellor with 1/2” Bore
1/2-20 Left Hand Jam Nut
1/2” S.A.E. Flat Washer
1/8” x 1/8” x 1-1/2” Key
1/2” S.A.E. Flat Washer
Neoprene Sponge Tape (sold by the foot)
American Dryer Corporation
450422-3
Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
Illus. No.
7
Part No.
Qty.
850019
803963
1
1
803961
1
803902**
1
880848**
1
150501
153002
153001
154000
100065
4
4
4
4
1
100066
1
22
150501
153002
153001
153001
101131
101133
101130
100113
100115
122701
137030
122801
837005
837006
100007
4
4
4
*
1
1
1
1
1
8
1
1
1
1
1
23
24
120200
100701
1
1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Description
Motor Mount ONLY
1/2 HP, 100-50 Hz 115-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor Mount Assembly Complete with Plug Motor
(includes illus. nos. 1 through 7 and 11 through 17)
1/2 HP, 240v 1ø 50 Hz Totally Enclosed, Fan-cooled (T.E.F.C.) Motor
Mount Assembly Complete with Plug Motor
(includes illus. nos. 1 through 7 and 11 through 17)
1/2 HP 208/230/380/460v 3ø 50 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor Mount Assembly Complete
(includes illus. nos. 1 through 7, 11, 13 through 17, 22 and 23)
1/2 HP, 208/230/380/460v 3ø 60 Hz T.E.F.C. Motor Mount Assembly
Complete (includes illus. nos. 1 through 7, 11, 13 through 17, 22 and 23)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 Tinnerman Nut
1/2 HP, 100-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor with Plug
1/2 HP, 240v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor
with Plug
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16” Flat Washer
1/2” x 2-1/4” Motor Pulley (for use on 1ø, 60 Hz models Only)
5/8” x 2-1/4” Motor Pulley (for use on 3ø, 60 Hz models Only)
5/8” x 2-1/2” Motor Pulley (for use on 3ø, 50 Hz models Only)
4L-400 V-Belt (to idler) For Use On 60 Hz Models ONLY
4L-410 V-Belt (to idler) For Use On 50 Hz Models ONLY
Socket Terminal ONLY
8-Pin Housing ONLY
Pin/Socket Extraction Tool
120v/1ø Motor Harness with Plug
230v/1ø Motor Harness with Plug
1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor
3/8” x 90º Connector
3/16” x 3/16” x 1” Key (for use on 3ø models Only)
* As required.
** Specifying voltage when ordering.
450422-3
Telephone: (508) 678-9000 / www.amdry.com
19
Direct Spark Ignition (DSI) Gas Valve/Burner Assembly
Illus. No.
1
2
3
4
20
Part No.
850804
809313*
Qty.
1
1
809314*
1
150300
881367
318650
2
1
1
Description
Direct Spark Ignition (DSI) Gas Valve/Burner Tube Mounting Plate ONLY
Direct Spark Ignition (DSI) (natural gas) Gas Valve/Burner Assembly
Complete Less Orifice
(includes illus. nos. 1, 3, 5 through 10, and 12 through 21)
Direct Spark Ignition (DSI) Liquid Propane (L.P.) Gas Valve/Burner
Assembly Complete Less Orifice
(includes illus. nos. 1, 3, 5 through 10, and 12 through 21)
#10 x 1/2” Hex Washer TEK Screw
Union Shutoff with 1/2” Tail Piece
Notched Pipe Bracket
American Dryer Corporation
450422-3
Direct Spark Ignition (DSI) Gas Valve/Burner Assembly
Illus. No.
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Part No.
150301
128927
140411
318650
150301
141235
140828
140811
153000
152001
141130
318009
141109
150315
128917
305412
128918
121006
132607
121028
882627
Qty.
2
1
1
1
2
1
1
1
1
1
1
1
1
2
1
1
1
1
2
1
1
880815
23
24
151000
835045
4
1
801013
25
26
152014
---------
1
-
---
874059**
1
Description
#8-18 x 7/16” Phillips Pan Head TEK Screw
1/2” 24 VAC Redundant (natural gas) Gas Valve
1/2” 24 VAC Gas Valve Liquid Propane (L.P.) Conversion Kit
Notched Pipe Bracket
#8-18 x 7/16” Phillips Pan Head TEK Screw
1/2” Single Port Manifold
#20 Burner Orifice (natural gas Only)
#41 Burner Orifice (liquid propane [L.P.] gas Only)
#8 Steel Burr
#8-32 Hex Nut
Direct Spark Ignition (DSI) Up-Shot Burner Tube
Burner Tube Bracket (PSE)
Flame Spreader ONLY
#6 x 3/8” Phillips Pan Head Machine Screw
Spark Electrode with High Voltage (HV) Wire
Direct Spark Ignition (DSI) Ignitor Gap Feeler Gauge ... Not Illustrated
Flame Sensor Probe
#10 Insulated Terminal
#18 Gauge Red Silicone Wire (sold by the foot)
1/4” x .032 Insulated Terminal
ADC Direct Spark Ignition (DSI) Module ONLY (50/60 Hz)
(for models mfd. as of April 17, 2000)
ADC Direct Spark Ignition (DSI) Module ONLY (50/60 Hz)
(for models mfd. prior to April 17, 2000)
#6-32 Pal Nut
Direct Spark Ignition (DSI) Module Mounting Bracket
(for models mfd. as of April 17, 2000)
Direct Spark Ignition (DSI) Module Mounting Bracket
(for models mfd. prior to April 17, 2000)
1/4-20 Free Spin Wash Nut
Idler Bearing Mount
(refer to Idler Bearing Assembly on page 16 and page 17)
ADG-235ED Liquid Propane (L.P.) Conversion Kit with Orifice
* Burner orifice is not included and must be ordered separately.
** Consult factory for elevations over 2,000 feet.
450422-3
Telephone: (508) 678-9000 / www.amdry.com
21
Gas Piping Assembly
Illus. No.
1
2
3
4
22
Part No.
318702
150300
141236
881367
Qty.
1
2
1
2
Description
Top Pipe Support Bracket ONLY
#10 x 1/2” Hex Washer TEK Screw
Gas Piping Manifold
Union Shutoff with 1/2” Tail Piece
American Dryer Corporation
450422-3
Gas Burner Assembly
Illus. No.
Part No.
Qty.
1
804025
1
2
3
4
318006
150300
802502
1
2
1
5
6
7
8
319710
150301
150001
130301
151000
1
2
2
1
2
450422-3
Description
Gas Burner/Electric Oven Chamber Assembly
(includes illus. nos. 1, 2, and 3)
Flame Viewing Plate
#10 x 1/2” Hex Washer TEK Screw
Hi-Limit Bracket Assembly
(includes illus. nos. 4 through 8)
Hi-Limit Bracket ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6-32 x 1/2” Right Hand Machine Screw
225º Manual Reset Thermostat
#6-32 Pal Nut
Telephone: (508) 678-9000 / www.amdry.com
23
Sail Switch Assembly
Illus. No.
24
Part No.
Qty.
1
2
150301
802800
2
1
3
4
5
6
7
8
9
10
154004
150415
802799
122200
150303
105500
319206
154002
1
2
1
1
2
1
1
1
Description
#8-18 x 7/16” Phillips Pan Head TEK Screw
Sail Switch Box with Cover and Bracket ONLY
(includes illus. nos. 2, 4, and 5)
Twin Speed Nut
#10-16 x 1/2” Phillips Round Head Crimptite Screw
Sail Switch Box Cover and Bracket ONLY
Sail Switch ONLY
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (embossed)
1/8” Push On Fastener
American Dryer Corporation
450422-3
3-Phase (3Ø) Motor, Electrical Relay Panel Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
450422-3
Part No.
150300
321002
137015
132430
150100
150300
151001
311920
850909
Qty.
2
1
1
1
4
2
4
1
1
Description
#10 x 1/2” Hex Washer TEK Screw
Electrical Relay Panel Cover ONLY
Arc Suppressor (A.S.) Board (capacitor) ONLY
(208/230/240v, 50/60 Hz) Impellor Contactor Coil - 24 VAC
#8-32 x 1/2” Round Head Machine Screw
#10 x 1/2” Hex Washer TEK Screw
#8-32 Pal Nut
3-Phase (3ø) Contactor Mounting Bracket ONLY
Electrical Relay Panel Assembly
(includes illus. nos. 1, 2, and 9)
Telephone: (508) 678-9000 / www.amdry.com
25
Back Guard Assembly
Illus. No.
1
2
3
4
5
26
Part No.
311014
150301
318702
150300
103500
Qty.
2
16
1
2
4
Description
Upper/Lower Back Guard Assembly
#8-18 x 7/16” Phillips Pan Head TEK Screw
Top Pipe Support Bracket ONLY
#10 x 1/2” Hex Washer TEK Screw
Adjustable Leveling Leg
American Dryer Corporation
450422-3
Exhaust Ducting Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
--*
Part No.
880505
143527
143539
143537
143538
143536
121104
121105
150301
315025
150300
121104
121105
150301
143536
315025
150300
117505
Qty.
1
1
1
1
1
1
1
1
2
1
2
1
1
2
1
1
2
*
Description
Wye Branch Damper Assembly
6” Round x 7” Oval Straight Boot
15-1/2” Long x 7” Oval Duct
7” Oval x 45º Elbow
6” Round x 7” Oval Straight Boot
6” Round x 45º Elbow
Junction Box ONLY
Junction Box Cover ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated
Rear Wiring Box Cover ONLY
#10 x 1/2” Hex Washer TEK Screw ... Not Illustrated
Junction Box ONLY
Junction Box Cover ONLY
#8-18 x 7/16” Phillips Head TEK Screw ... Not Illustrated
6” Round x 45º Elbow
Rear Wiring Box Cover ONLY
#10 x 1/2” Hex Washer TEK Screw
Aluminum Duct Tape (sold by the foot)
As required.
450422-3
Telephone: (508) 678-9000 / www.amdry.com
27
Microprocessor Coin Acceptor Listing
NOTE: Coin acceptor listed includes optical switch (Hanke includes Part No. 881143).
Single Coin*
Part Number
Nation
Description
881163
United States and Canada
25¢ Hanke Coin Acceptor
*FOR COIN ACCEPTORS
NOT SHOWN CONSULT FACTORY
FOR AVAILABILITY
28
American Dryer Corporation
450422-3
Additional Parts Available
Part No.
Description
112039
112280
112533
114001
114006
120800
120802
120902
120903
121499
121500
121503
122804
170194
404500
404502
404506
404507
404516
404515
“Black/White/Green Ground” Label
“Clean Lint Screen” Label
“Phase 5 Coin Program Location Summary” Label
“Caution - Exhaust/Lint Screen” Label
“Warning - Fire Hazards” Label
1/4” In-Line Connector
Red Butt Connector
#74B Wire Nut
Closed End Connector
5-1/2” Harness Tie
7” Harness Tie
Harness Tie Mounting Clip
Manometer (water column test gauge)
Tumbler Lint Cleaning Brush
Almond Brush-In-Cap Bottle Touch-Up Paint
White Brush-In-Cap Bottle Touch-Up Paint
Almond “B” Brush-In-Cap Bottle Touch-Up Paint
Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
Ivory Brush-In-Cap Bottle Touch-Up Paint
Coral Blue Brush-In-Cap Bottle Touch-Up Paint
450422-3
Telephone: (508) 678-9000 / www.amdry.com
29
ADC 450422
3 - 03/23/05-0