Download American Dryer Corp. AD-75D II User's Manual

AD-75D II
Parts Manual
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
073100MFM/tcosta
ADC Part No. 450432
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or
other flammable vapors or liquids
in the vicinity of this or any other
appliance.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables dans le voisinage de cet
appareil ou de yout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________
MODEL NO.
AD-75D II
__________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s)
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
Table of Contents
Control Door Assembly Without Trim
For OPL (Non-Coin) Models Mfd. as of July 13, 1998 ........................................................................ 2
Control Door Assembly With Trim
For ALL Coin Models and ONLY OPL Models Mfd. prior to July 13, 1998 ................................... 3
Phase 5 Coin Microprocessor Control Panel Assembly ...................................................................................... 4
Phase 5 OPL Microprocessor Control Panel Assembly ...................................................................................... 5
Phase 5 Coin and OPL Microprocessor Control Box Assembly ......................................................................... 6
Coin Vault Assembly ............................................................................................................................................ 7
Dual Timer Control Panel Assembly
For Models Mfd. prior to November 3, 2000 ................................................................................... 8, 9
Dual Timer “Tap Touch” Controls
For Models Mfd. as of November 3, 2000 ........................................................................................... 10
Dual Timer Control Box Assembly .................................................................................................................... 11
“Plastic” Door Front Panel Assembly ............................................................................................................... 12
Cold Rolled Steel (CRS) Door Front Panel ....................................................................................................... 13
“Plastic” Door Main Door Switch Housing ....................................................................................................... 14
Main Door Switch Assembly Cold Rolled Steel (CRS) Door ............................................................................ 15
Cold Rolled Steel (CRS) Main Door Assembly ........................................................................................... 16, 17
“Plastic” Main Door Assembly .......................................................................................................................... 18
Basket (Tumbler)/Support Assemblies ............................................................................................................... 19
Drop Lint Door Assembly Without Trim
For OPL (Non-Coin) Models ................................................................................................................. 20
Drop Lint Door Assembly With Trim
For ALL Coin Models ............................................................................................................................. 21
Basket (Tumbler) Bearing Assembly ........................................................................................................... 22, 23
Lint Trap Assembly ............................................................................................................................................ 24
Idler Bearing Assembly ..................................................................................................................................... 25
Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ..................................... 26, 27
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ............................................. 28, 29
Sensor Bracket Assemblies ......................................................................................................................... 30, 31
Electric Oven Assembly .............................................................................................................................. 32, 33
4-Tube Burner Assembly ............................................................................................................................. 34, 35
Single-Phase (1Ø) Motor, Electric Relay Panel Assembly ................................................................................ 36
3-Phase (3Ø) Motor, Electric Relay Panel Assembly ....................................................................................... 37
Microprocessor Reversing Rear Control Box Assembly
For Gas, Electric, and Steam Models ................................................................................................... 38
Dual Timer Reversing Rear Control Box Assembly
For Gas, Electric, and Steam Models ................................................................................................... 39
Air Operated Steam Damper Assembly ...................................................................................................... 40, 41
Outer Top/Back Guard Assemblies
For Gas and Electric Models ONLY ..................................................................................................... 42
Back Guard Assembly
For Steam Models ONLY ........................................................................................................................ 43
Microprocessor Coin Acceptors Listing ............................................................................................................ 44
Electric Oven Component Application Chart ..................................................................................................... 45
Step Down Transformer Usage Listing ............................................................................................................. 46
Additional Parts Available .................................................................................................................................. 47
2
Control Door Assembly Without Trim
For OPL (Non-Coin) Models Mfd. as of July 13, 1998
Illus. No.
Part No.
Qty.
1
881053
870011
881045*
1
1
1
881046
1
117604
150300
102603
102601
102502
882541
4
4
1
1
1
2
2
3
4
5
6
7
8
*
Description
ADC Logo ONLY (with double adhesive tape)
Logo Double Tape Kit
Control Door
(includes illus. nos. 2 and 3)
Stainless Steel Control Door
(includes illus. nos. 2 and 3)
Neoprene Sponge Tape (sold by the foot)
#10 x 1/2” Hex Washer TEK Screw
Control Door Rod Support Catch
Control Door Rod Retainer Clip
Control Door Support Rod
Spring Turn Latch Assembly
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
3
Control Door Assembly With Trim
For ALL Coin Models and ONLY OPL Models Mfd. prior to July 13, 1998
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
*
Part No.
Qty.
160015
1
160017
1
160104
160016
112350
870011
800020*
1
1
1
1
1
800144
1
180202
117603
150201
150309
102603
102601
102502
1
3
6
4
1
1
1
Description
High Security MK-100 Lock Assembly with Key
(for coin models Only)
Special Dummy Lock ONLY
(for non-coin models Only)
MK-100 Key ONLY (for dummy lock also)
Lock Cam ONLY
ADC Logo ONLY
Logo Double Tape Kit
High Security Control Door Assembly
(includes illus. nos. 4 through 7)
Stainless Steel High Security Control Door Assembly
(includes illus. nos. 4 through 7)
Top Trim Strip (gray) with Lock Hole (38-1/4” length)
Suppressor Tape/Gasket (sold by the foot)
#10-32 x 1/4” Phillips Pan Head TEK Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Control Door Rod Support Catch
Control Door Rod Retainer Clip
Control Door Support Rod
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
4
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No.
1
2
Qty.
112526
801213
1
1
801229
1
5
6
7
801259
801258
150309
137213
824998
153010
150005
--------
1
1
1
1
1
2
2
1
8*
--------
1
9*
10
137023
137021*
880772
824080
122800
136048
1
3
1
1
1
1
3
4
11
*
Part No.
Description
Coin Keyboard Label Assembly
Phase 5 Coin Control Panel Assembly
(includes illus. nos. 1, 2, 4, 5, and 6)
Phase 5 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, 4, 5, and 6)
Coin Control Panel ONLY
Coin Control Panel ONLY with Battery Bracket
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Phase 5 Coin Controller ONLY
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
Coin Acceptor
(refer to Microprocessor Coin Acceptors Listing on page 44)
Optic Switch ONLY
(refer to Microprocessor Coin Acceptors Listing on page 44)
Optic Switch Connector ONLY
Microprocessor Socket ONLY
Single Coin Optical Switch Harness
Dual Coin Optical Switch Harness
Microprocessor (female) Pin Extraction Tool
1/8-Amp (slo blo) Fuse
For dual coin models double the quantity shown.
IMPORTANT: Check label on computer chip to verify correct part number of controller.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
5
Phase 5 OPL Microprocessor Control Panel Assembly
Illus. No.
1
2
3
4
5
6
7
Part No.
Qty.
112535
112276
112275
1
1
1
112277
1
112278
1
801255
801256
801206
1
1
1
801207
1
137222
137231
824998
153010
150005
150413
136048
1
1
1
2
2
1
1
Description
OPL English Keyboard Label Assembly
OPL Stick-On Labels (English Only) ... Not Illustrated
OPL Stick-On Labels ... Not Illustrated
(Spanish, Italian, and Hebrew)
3-Language OPL Stick-On Labels ... Not Illustrated
(English, Spanish, and Hebrew)
5-Language OPL Stick-On Labels ... Not Illustrated
(Italian, Dutch, French, German, and Chinese)
Phase 5 Microprocessor Control Panel ONLY
Phase 5 Microprocessor Control Panel ONLY with Battery Bracket
Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly
Complete
(includes illus. nos. 1 through 6)
Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete
(includes illus. nos. 1 through 6)
Phase 5 OPL Non-Reversing Controller ONLY
Phase 5 OPL Reversing Controller ONLY
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
#10-16 x 1/2” TORX Crimptite
1/8-Amp (slo blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for controller.
Telephone: (508) 678-9000
Fax: (508) 678-9447
6
Phase 5 Coin and OPL Microprocessor Control Box Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
*
Part No.
Qty.
141403
1
132070
1
150300
120715
150002
151000
136057
150301
136008
122641
122706
112801
2
1
2
2
*
*
*
1
*
1
Description
Transformer - 24 VAC
(for ALL 120/208/240/380/416/480 volt gas and steam models)
(for 380/416/480 volt electric models)
Transformer - 24 VAC
(for 208/240 volt electric models)
#10 x 1/2” Hex Washer TEK Screw
30-Position Terminal Block
#6-32 x 1” Phillips Round Head Machine Screw
#6-32 Pal Nut
1/2-Amp (slo blo) Fuse ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fuse Block/Strip ONLY
15-Pin Microprocessor Connector
Socket ONLY
Pin/Socket Extraction Tool
As required.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
7
Coin Vault Assembly
Illus. No.
1
Qty.
802112
1
4
802117
160028
875061
160105*
802020
1
1
1
1
1
5
6
7
8
9
802019
125915
802018
152014
102502
102601
102603
1
1
1
4
1
1
1
2
3
*
Part No.
Description
Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 6)
Microprocessor Coin Vault ONLY
Cam For 1/4 Turn Lock ONLY
1/4 Turn Lock with Key and Cam
1/4 Turn Mer-Pel Key ONLY
1/4 Turn Coin Box Assembly
(includes illus. nos. 2 through 5)
1/4 Turn Coin Box ONLY without Face Plate
High Security (Greenwald) Coin Box ONLY with Key
1/4 Turn Coin Box Face Plate ONLY
1/4-20 Free Spin Wash Nut
Control Door Support Rod
Control Door Rod Retainer Clip
Control Door Rod Support Catch
Specify key number when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
8
Dual Timer Control Panel Assembly
For Models Mfd. prior to November 3, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
9
Dual Timer Control Panel Assembly
For Models Mfd. prior to November 3, 2000
Illus. No.
Part No.
Qty.
1
2
3
123005
122400
824015
1
1
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
---
800051
131917
150207
154001
152000
153010
120730
150002
150110
150001
131931
151000
112050
150309
124103
124025
124030
122602
122700
122801
1
1
2
2
2
2
1
2
4
2
1
2
1
1
2
1
1
1
8
1
Telephone: (508) 678-9000
Description
Red Indicator Light - 24 VAC
Rocker Heat Selector Switch
Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 21)
Dual Timer Control Panel ONLY
Push-to-Start Relay - 24 VAC
#10-24 x 1/2” Phillips Pan Head Machine Screw
#10-24 Speed Nut
#6-32 Hex Nut
#6 Star Washer
30-Position Terminal Block
#6-32 x 1” Phillips Round Head Machine Screw
#8-32 x 1/4” Phillips Round Head Machine Screw
#6-32 x 1/2” Phillips Round Head Machine Screw
Dual Timer Relay - 24 VAC
#6-32 Pal Nut
Dual Timer Label ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Arrow Timer Knob
60 Minute Timer - 24 VAC
15 Minute Timer - 24 VAC
9-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool
Fax: (508) 678-9447
10
Dual Timer “Tap Touch” Controls
For Models Mfd. as of November 3, 2000
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
124030
124025
824175
122301
131932
120730
151000
882903
1
1
1
1
3
1
6
1
9
10
11
12
13
14
15
850392
153010
152000
150207
150110
112563
124104
124105
2
3
2
4
1
1
1
American Dryer Corporation
Description
15 Minute Timer - 24 VAC
60 Minute Timer - 24 VAC
Red Pilot Light - 24 VAC
“Tap Touch” Switch
Relay SPST 24v
30-Position Terminal Block
#6-32 Pal Nut
Dual Timer Panel Complete
(includes illus. nos. 1 through 15)
Dual Timer Panel ONLY
#6 Star Washer
#6-32 Hex Nut
#10-24 x 1/2” Phillips Pan Head Machine Screw
#8-32 x 1/4” Phillips Round Head Machine Screw
Dual Timer Panel Overlay
Pure Touch Knob with Red Pointer
Pure Touch Knob with Blue Pointer
88 Currant Road / Fall River, MA 02720-4781
11
Dual Timer Control Box Assembly
Illus. No.
1
2
3
4
5
6
7
8**
9
10
11
12
Part No.
Qty.
122603
122701
122801
315010
150300
150300
141403
1
8
1
1
2
2
1
132070
1
136008
136057
150301
150002
120715
151000
*
*
*
2
1
2
Description
9-Pin Socket Connector
Socket Terminal ONLY
Pin/Socket Extraction Tool
9-Pin Connector Bracket
#10 x 1/2” Hex Washer TEK Screw
#10 x 1/2” Hex Washer TEK Screw
Transformer - 24 VAC
(for ALL 120/208/240/380/416/480 volt gas and steam models)
(for 380/416/480 volt electric models)
Transformer - 24 VAC
(for 208/240 volt electric models)
Fuse Block/Strip ONLY
1/2-Amp (slo blo) Fuse ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6-32 x 1” Phillips Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
* As required.
** Check fuse rating for verification.
Telephone: (508) 678-9000
Fax: (508) 678-9447
12
“Plastic” Door Front Panel Assembly
Illus. No.
Part No.
Qty.
1
875302*
1
875313
1
2
3
4
5
154215
170330
150300
150313
2
1
1
8
6
150309
150318
121405
8
**
1
Description
Right Hand Insulated Front Panel Assembly Complete
(includes illus. nos. 1, 2, 3, and 6)
Stainless Steel Right Hand Insulated Front Panel Assembly Complete
(includes illus. nos. 1, 2, 3, and 6)
5/32 x 1/4” Rivet
Friction Door Latch
#10 x 1/2” Hex Washer TEK Screw
#10-16 x 1/2” TORX-Plus BTN, Type 1
(for models mfd. as of October 2, 2000)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
25IP Stick-Fit TORX-Plus Bit
Rubber Grommet
* Specify color when ordering.
** As required.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
13
Cold Rolled Steel (CRS) Door Front Panel
Illus. No.
Part No.
Qty.
1
881273*
1
881289
1
154215
170330
150300
150313
2
1
1
8
150309
150318
881152
881208
150445
150443
881151
881209
8
**
1
1
4
4
1
1
2
3
4
5
6
7
8
Description
Front Panel Assembly (cold rolled steel [CRS] door)
(includes illus. nos. 1 through 3)
Stainless Steel Front Panel Assembly (cold rolled steel [CRS] door)
(includes illus. nos. 1 through 3)
5/32 x 1/4” Rivet
Friction Door Latch
#10 x 1/2” Hex Washer TEK Screw
#10-16 x 1/2” TORX-Plus BTN, Type 1
(for models mfd. as of October 2, 2000)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
25IP Stick-Fit TORX-Plus Bit
Black Top Hinge Block Assembly
Stainless Steel Top Hinge Block Assembly
1/4-20 x 7/8” Black Cap Head Setscrew
1/4-20 x 7/8” Stainless Steel Cap Head Setscrew
Black Bottom Hinge Block Assembly
Stainless Steel Bottom Hinge Block Assembly
* Specify color when ordering.
** As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
14
Illus. No.
“Plastic” Door Main Door Switch Housing
Part No.
Qty.
1
2
3
4
5
6
152013
153008
137005
121028
154281
800448
2
2
1
2
2
1
7
8
9
10
153565
313218
150201
121405
2
1
2
1
American Dryer Corporation
Description
#6-32 Hex Nut 1/4” ATF Zinc Plated
#6 Lock Washer
Single-Pole Door Switch (SDS)
Insulated Terminal ONLY
3/8” Standard Nylon Spacer
12-1/2” Stainless Steel Main Door Hinge Assembly
(includes illus. nos. 6 and 7)
#6-32 x 1” Self Clinching Stud
Main Door Switch Housing
#10-32 x 1/4” Phillips Pan Head TEK Screw
Rubber Grommet
88 Currant Road / Fall River, MA 02720-4781
Main Door Switch Assembly Cold Rolled Steel (CRS) Door
Illus. No.
1
2
3
4
5
6
7
Part No.
153566
152013
153010
137005
122636
881211
150301
Qty.
2
2
2
1
2
1
2
Telephone: (508) 678-9000
15
Description
#6-32 x 7/8” Clinch Stud
#6-32 Hex Nut 1/4” ATF Zinc Plated
#6 Star Washer
Single-Pole Door Switch (SDS)
Flag Terminal
Main Door Switch Housing
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
16
American Dryer Corporation
Cold Rolled Steel (CRS) Main Door Assembly
88 Currant Road / Fall River, MA 02720-4781
17
Cold Rolled Steel (CRS) Main Door Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Part No.
Qty.
881150
1
881207
1
102354
170730
170731
881152
1
1
1
1
881208
1
150445
150443
153031
881151
2
2
1
1
881209
1
150445
150443
150683
150682
2
2
3
3
152014
151010
151009
150120
150683
150682
3
1
1
1
3
3
152014
881210
170333
102210
170730
3
1
1
1
1
Telephone: (508) 678-9000
Description
Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
Stainless Steel Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
Door Gasket
Clear Glass and Gasket Adhesive (10.3 oz. cartridge)
Black Glass and Gasket Adhesive (10.3 oz. cartridge)
Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
Stainless Steel Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
1/4-20 x 7/8” Black Cap Head Setscrew
1/4-20 x 7/8” Stainless Steel Cap Head Setscrew
1/4” Nylon Washer
Black Bottom Hinge Block Assembly
(includes illus. nos. 5, 6, and 7)
Stainless Steel Bottom Hinge Block Assembly
(includes illus. nos. 5, 6, and 7)
1/4-20 x 7/8” Black Cap Head Setscrew
1/4-20 x 7/8” Stainless Steel Cap Head Setscrew
1/4-20 x 5/8” Black Carriage Bolt
1/4-20 x 5/8” Stainless Steel Carriage Bolt
(for models with stainless steel doors)
1/4-20 Free Spin Wash Nut
#10-32 Black Hex Acorn Nut
#10-32 Stainless Steel Hex Acorn Nut
Door Latch Screw
1/4-20 x 5/8” Black Carriage Bolt
1/4-20 x 5/8” Stainless Steel Carriage Bolt
(for models with stainless steel doors)
1/4-20 Free Spin Wash Nut
Black Main Door Handle ONLY
Stainless Steel Main Handle ONLY
20-7/16” Door Glass
Clear Glass and Gasket Adhesive (10.3 oz. cartridge)
Fax: (508) 678-9447
18
Illus. No.
“Plastic” Main Door Assembly
Part No.
Qty.
1
881421
1
2
3
4
5
6
800448
150410
152014
102349
102212
170730
150448
170319
150431
4
4
4
1
1
1
4
4
1
7
8
9
American Dryer Corporation
Description
Gray Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9)
12-1/2” Stainless Steel Main Door Hinge Assembly
#10-24 x 3/8” Phillips Pan Head Taptite Screw
1/4-20 Free Spin Wash Nut
Main Door Gasket
20-7/16” Door Glass with (4) Holes
Clear Glass and Gasket Adhesive (10.3 oz. cartridge)
1/2” Stainless Steel Flat Head Allen Screw
Door Glass (nylon) Spacer
Main Door Latch Screw
(#10 x 7/16” dome hex head)
88 Currant Road / Fall River, MA 02720-4781
19
Basket (Tumbler)/Support Assemblies
Illus. No.
1*
Qty.
800708
800857
800816
1
1
1
800873
1
800819
1
800876
1
2
150413
150429
40
1
3
301308
301408
150500
100905
153004
800613
800615
152005
153005
153004
116000
401010
4
4
1
4
4
1
1
4
4
4
1
1
4
5
6
7
8
9
10
11
--*
Part No.
Description
Basket (tumbler) ONLY without Felt Collar
Stainless Steel Basket (tumbler) ONLY without Felt Collar
Non-Reversing Basket (tumbler) and Support Assembly Complete
(includes illus. nos. 1 through 10)
Stainless Steel Non-Reversing Basket (tumbler) and Support
Assembly Complete
(includes illus. nos. 1 through 10)
Reversing Basket (tumbler) and Support Assembly Complete
(includes illus. nos. 1 through 10)
Stainless Steel Reversing Basket (tumbler) and Support Assembly
Complete
(includes illus. nos. 1 through 10)
#10-16 x 1/2” TORX Crimptite
TORX Hand Driver
(for removal of TORX head screw)
Basket (tumbler) Rib ONLY
Stainless Steel Basket (tumbler) Rib ONLY
5/16-18 x 3/4” Socket Button Head Screw
3/8-16 x 37” Tie Rod
3/8” Flat Washer
Non-Reversing Basket (tumbler) Support ONLY
Reversing Basket (tumbler) Support ONLY
3/8” Hex Nut
3/8” Lock Washer
3/8” Flat Washer
Felt Collar ONLY
#847 Adhesive For Felt Collar
Felt collar is not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
20
Drop Lint Door Assembly Without Trim
For OPL (Non-Coin) Models
Illus. No.
1
Qty.
160001
160103
800150
1
1
1
2
160003
160104
160008
160009
150425
1
1
1
1
1
3
4
157000
802104*
1
1
882106
1
150201
117604
150419
108120
150418
6
7
2
1
1
5
6
7
8
*
Part No.
Description
AD-100 Lock Assembly with Key (for coin models Only)
AD-100 Key ONLY
Knob Latch Kit Assembly
(includes illus. nos. 1 and 2)
Dummy Lock ONLY (for non-coin models)
MK-100 Key ONLY (for dummy lock)
Lock Cam For AD-100 and Dummy Lock
Knob Latch Adjustable Cam ONLY
#12-24 x 3/8” Round Head Machine Screw ONLY
(screw for knob latch adjustable cam)
Drop Lint Door Spring
Insulated Drop Lint Door Assembly
(includes illus. nos. 4 through 8)
Stainless Steel Insulated Drop Lint Drawer Assembly
(includes illus. nos. 4 through 8)
#10-32 x 1/4” Phillips Pan Head TEK Screw
Neoprene Sponge Tape (sold by the foot)
#6 x 1/2” Tamperproof TEK Screw
Chain For Drop Lint Door (10-1/2” length)
Tamperproof Screw Hand Driver
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
21
Drop Lint Door Assembly With Trim
For ALL Coin Models
Illus. No.
1
Qty.
160001
160103
800150
1
1
1
2
160003
160104
160008
160009
150425
1
1
1
1
1
3
4
157000
800237*
1
1
880229
1
150201
117604
117603
180212
150419
108120
150418
6
7
3
1
2
1
1
5
6
7
8
9
10
--*
Part No.
Description
AD-100 Lock Assembly with Key (for coin models Only)
AD-100 Key ONLY
Knob Latch Kit Assembly
(includes illus. nos. 1 and 2)
Dummy Lock ONLY (for non-coin models)
MK-100 Key ONLY (for dummy lock)
Lock Cam For AD-100 and Dummy Lock
Knob Latch Adjustable Cam ONLY
#12-24 x 3/8” Round Head Machine Screw ONLY
(screw for knob latch adjustable cam)
Drop Lint Door Spring
Insulated Drop Lint Door Assembly
(includes illus. nos. 4 through 8)
Stainless Steel Insulated Drop Lint Drawer Assembly
(includes illus. nos. 4 through 8)
#10-32 x 1/4” Phillips Pan Head TEK Screw
Neoprene Sponge Tape (sold by the foot)
Suppressor Tape/Gasket (sold by the foot)
Mid Trim/Kick Plate - Gray (8-1/4” length)
#6 x 1/2” Tamperproof TEK Screw
Chain For Drop Lint Door (10-1/2” length)
Tamperproof Screw Hand Driver
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
22
American Dryer Corporation
Basket (Tumbler) Bearing Assembly
88 Currant Road / Fall River, MA 02720-4781
23
Basket (Tumbler) Bearing Assembly
Illus. No.
1
2
3
4
Part No.
Qty.
880220
153025
152050
882544
1
4
4
1
882545
1
882542
882543
1
1
5
880202
880779
1
1
6
7
8
9
10
11
12
13
14
15
16
17
150601
153004
153004
153005
152005
154326
152004
150621
153002
153004
150501
102120
2
2
2
2
2
2
2
2
4
6
4
1
18
19
824807
100735
1
1
20
101100
1
101118
1
21
101119
1
22
100108
100106
1
1
23
24
150610
152004
2
2
Telephone: (508) 678-9000
Description
1-3/4” Flange Bearing
9/16” Lock Washer
9/16-12 Hex Nut
Pillow Block Bearing Assembly Complete
(includes illus. nos. 4 through 17)
Pillow Block Bearing Assembly Complete with Rotational Sensor
(includes illus. nos. 4 through 18)
Pillow Block Bearing Platform ONLY
Pillow Block Bearing Platform ONLY
(for models with rotational sensor)
1-3/8” Pillow Block Bearing
1-3/8” Pillow Block Bearing
(for reversing models Only)
3/8-16 x 2” Hex Bolt
3/8” Flat Washer
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-24 x 3/8” Setscrew
5/16-18 Hex Nut
5/16-18 x 1-1/2” Tap Bolt Zinc
5/16” Lock Washer
3/8” Flat Washer
5/16-18 x 3/4” Tap Bolt Zinc
Sintered 8 Magnet
(for reversing models Only)
Rotational Sensor Assembly
Shaft Key
(for reversing models Only)
18” Pulley
(for non-reversing models Only)
18-3/4” Pulley
(for reversing models Only)
1-3/8” Taper Lock Bushing
(for reversing models Only)
5L-680 V-Belt (basket [tumbler] to idler)
5L-690 V-Belt
(for reversing gas and electric models Only)
5/16-18 x 1-1/2 Allen Setscrew
5/16-18 Hex Nut
Fax: (508) 678-9447
24
Lint Trap Assembly
Illus. No.
1
2
3
4
5
6
7
-
Part No.
Qty.
800440
1
800433
800441
1
1
800434
154200
304101
150300
800506
150419
108120
150418
1
7
1
3
1
2
1
1
American Dryer Corporation
Description
Non-Reversing Lint Trap Assembly Complete
(includes illus. nos. 1, 3, 4, and 5)
Non-Reversing Lint Trap ONLY
Reversing Lint Trap Assembly Complete
(includes illus. nos. 1, 3, 4, and 5)
Reversing Lint Trap ONLY
5/32” Pop Rivet
Lint Screen Holder ONLY
#10 x 1/2” Hex Washer TEK Screw
Lint Screen ONLY
#6 x 1/2” Tamperproof TEK Screw
Chain For Drop Lint Door (10-1/2” length)
Tamperproof Screw Hand Driver
88 Currant Road / Fall River, MA 02720-4781
25
Idler Bearing Assembly
Illus. No.
Part No.
Qty.
1
100108
100106
1
1
2
3
101140
100114
100109
1
1
1
4
5
6
154301
100705
882576
2
1
1
7
8
9
10
11
12
150617
153005
153004
801009
152004
150509
2
2
2
1
1
1
Telephone: (508) 678-9000
Description
5L-680 V-Belt
5L-690 V-Belt
(for reversing gas and electric models Only)
14” x 3” Compound Pulley
4L-630 V-Belt
4L-650 V-Belt
(for reversing steam models Only)
5/16-18 x 1” Allen Setscrew
3/16” x 3/16” x 1-3/8” Key
Idler Bearing Assembly Complete
(includes illus. nos. 5 through 12)
3/8-16 x 1” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
Idler Square Washer
5/16-18 Hex Nut
5/16-18 x 3” Hex Head Machine Bolt
Fax: (508) 678-9447
26
Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
Illus. No.
1
2
3
4
5
6
7*
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
*
Part No.
Qty.
100114
100701
101133
101130
150501
153002
153001
100073
1
1
1
1
4
4
4
1
122701
122801
137030
152004
153002
153001
117604
154000
800919
803992*
8
1
1
4
4
4
4
4
1
1
803953
1
803955*
1
803958*
1
153051
882670
100714
153050
152006
120200
100075*
1
1
1
2
2
1
1
100076
1
27
Description
4L-630 V-Belt (motor to idler)
3/16” x 3/16” x 1” Key
5/8” x 2-1/4” Motor Pulley (60 Hz Only)
5/8” x 2-1/2” Motor Pulley (60 Hz Only)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
1 HP 120/208/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor with Plug (56Z frame)
Socket Terminal ONLY
Pin/Socket Extraction Tool
8-Pin Housing Connector
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Neoprene Sponge Tape (sold by the foot)
5/16-18 Tinnerman Nut
Non-Reversing Motor Mount ONLY (56Z frame)
1 HP 120/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor Mount Assembly with Plug Complete
(includes illus. nos. 2 through 7 and 13 through 20)
3/4 HP 230v 1ø 50 Hz Non-Reversing Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor Mount Assembly Complete
(includes illus. nos. 2 through 6 and 13 through 22)
1 HP 230/380/460v 3ø 60 Hz Non-Reversing Totally Enclosed,
Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete
(includes illus. nos. 2 through 6 and 13 through 22)
1 HP 230/380/460v 3ø 50 Hz Non-Reversing Totally Enclosed,
Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete
(includes illus. nos. 2 through 6 and 13 through 22)
3/4” S.A.E. Flat Washer
16” Fab Fan Assembly (rivets)
3/16” x 3/16” x 1-7/8” Key
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
3/8” x 90° Connector
1 HP 208/230/240/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor
3/4 HP 230v 1ø Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor
56Z Frame (50 Hz Only)
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
28 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
Illus. No.
1
Part No.
Qty.
100114
1
100109
1
4
5
100701
101130
101139
120200
181003
1
1
1
1
1
6
7
8
9*
150501
153002
153001
100075
4
4
4
1
10
11
12
13
14
15
16
17
18
120200
150501
153002
153001
154000
152004
153002
153001
800920
803952**
1
4
4
4
8
7
7
7
1
1
803987**
1
19
117604
4
20
21
22
153051
100702
882670
881428
1
1
1
1
23
24
153050
152006
***
2
2
3
29
Description
4L-630 V-Belt (motor to idler)
For Reversing Gas and Electric Models ONLY
4L-650 V-Belt (motor to idler)
For Reversing Steam Models ONLY
3/16” x 3/16” x 1” Key
5/8” x 2-1/2” Motor Pulley (60 Hz Only)
5/8” x 2-3/4” Motor Pulley (50 Hz Only)
3/8” x 90° Connector
1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor (56Z frame)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
1 HP 208/230/240/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor with 3/4” Shaft (56Z frame)
3/8” x 90° Connector
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 Tinnerman Nut
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Reversing Motor Mount ONLY (56Z frame)
60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount
Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
50 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount
Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
Neoprene Sponge Tape (sold by the foot)
For Models Mfd. as of August 6, 1998
3/4” S.A.E. Flat Washer
1/8” x 1/8” x 1-1/2” Key
16” Fab Fan Assembly (rivets)
13” Impellor with 3/4” Bore
(for models mfd. prior to March 1, 1995)
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
* Check part number on motor data label to verify correct motor.
** Specify voltage when ordering.
*** As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
30
American Dryer Corporation
Sensor Bracket Assemblies
88 Currant Road / Fall River, MA 02720-4781
Sensor Bracket Assemblies
Illus. No.
Part No.
Qty.
1
880251
1
2
3
4
5
6
7
8
9
10
130301
153010
152000
121028
122701
122605
154007
150005
801425
1
2
2
2
4
1
2
2
1
11
12
13
14
15
16
17
18
19
20
21
22
23
24
305007
122604
122700
150301
150005
130111
130110
130301
130101
153010
152000
840065
121028
122701
122605
831702
1
1
4
2
5
1
1
1
1
5
5
1
8
4
1
1
25
801418
1
305007
122604
122700
122801
150301
1
1
4
1
2
26
27
28
Telephone: (508) 678-9000
31
Description
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 and 5 through 8)
225° Large Manual Reset Thermostat
#6 Star Washer
#6-32 Hex Nut
Insulated Terminal ONLY
Socket Terminal ONLY
4-Pin Socket Connector ONLY
1/4” Tinnerman Push On Fastener
#6-32 x 1/4” Phillips Round Head Machine Screw
Microprocessor Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 10)
Universal Sensor Bracket ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6-32 x 1/4” Phillips Round Head Machine Screw
130° Large Thermostat
150° Large Thermostat
225° Large Manual Reset Thermostat
180° Large Thermostat
#6 Star Washer
#6-32 Hex Nut
Sensor Jumper (4)
Insulated Terminal ONLY
Socket Terminal ONLY
4-Pin Socket Connector ONLY
Sensor (4) Bracket Harness Assembly
(includes illus. nos. 22 through 24)
Non-Computer Sensor (4) Bracket Assembly Complete - Includes Thermostats
(includes illus. nos. 14 through 25)
Universal Sensor Bracket ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
32
Electric Oven Assembly
ELECTRIC OVEN (FRONT VIEW)
ELECTRIC OVEN (REAR VIEW)
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
33
Electric Oven Assembly
Illus. No.
Part No.
Qty.
1
803005
---------*
---------*
150300
802800
802801
1
1
2
1
1
154004
150413
802799
122200
150303
105500
319202
154002
150300
803100
320611
150402
130400
150300
154001
121012
152014
---------*
---------*
120081
120080
152008
121011*
---------*
153009
320607
150402
1
2
1
1
2
1
1
1
2
1
1
2
1
2
1
1
3
1
1
1
2
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
*
Description
Large Electric Oven Box ONLY
Electric Oven Assembly Complete
Electric Element
#10 x 1/2” Hex Washer TEK Screw
Sail Switch Box with Bracket and Cover ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 4 through 12)
Twin Speed Nut
#10-16 x 1/2” TORX Crimptite
Sail Switch Box Cover and Bracket ONLY
Sail Switch ONLY
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
#10 x 1/2” Hex Washer TEK Screw
Electric Oven Front Cover ONLY
Large Relay Box Cover ONLY
#10-24 x 5/8” Slotted Truss Head Machine Screw
290° Hi-Limit
#10 x 1/2” Hex Washer TEK Screw
#10-24 Speed Nut
Terminal Lug For 110-8 Wire
1/4-20 Free Spin Wash Nut
Oven Relay
Oven Relay Replacement Coil
Internal Ceramic Insulator (2 per element)
External Ceramic Insulator (2 per element)
#10-32 Hex Nut (4 per element)
Bus Bar
Terminal Lug
#10 Star Washer (2 per element)
Large Electric Oven Right Side Cover ONLY
#10-24 x 5/8” Slotted Truss Head Machine Screw
Refer to Electric Oven Component Application Chart on page 45.
Telephone: (508) 678-9000
Fax: (508) 678-9447
34
American Dryer Corporation
4-Tube Burner Assembly
88 Currant Road / Fall River, MA 02720-4781
4-Tube Burner Assembly
Illus. No.
1
**
**
2
3
4
5
6*
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
-
Part No.
810047
882802
882801
141105
141210
318714
150300
140820
140805
150108
142707
151001
128927
150309
142506
152013
810030
128935
809309
142600
319704
151000
150001
130201
318700
143000
154004
802799
122200
150303
105500
319202
154002
142809
881231
Qty.
1
1
1
4
1
1
9
4
4
4
1
4
1
5
1
2
1
1
1
1
1
2
2
1
1
1
1
1
1
2
1
1
1
1
1
35
Description
Direct Spark Ignition (DSI) Burner Box 4-Tube Burner
Burner Assembly (4-tube) Natural Gas
Burner Assembly (4-tube) Liquid Propane (L.P.) Gas
Large Burner Tube
3/4” Direct Spark Ignition (DSI) Manifold (4-port)
Bracket For Horizontal Facing Gas Valve
#10 x 1/2” Hex Washer TEK Screw
Natural Orifice #29
Liquid Propane (L.P.) Gas Orifice #47
#8-32 x 1/2” Pan Head Machine Screw
1/2” x 1-1/2” B.I. Nipple
#8-32 Pal Nut
24 VAC Gas Valve
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/2” Street Elbow
#6-32 Hex Nut 1/4” ATF Zinc Plated
Johnson Controls Direct Spark Ignition (DSI) Module Mounting Bracket
Direct Spark Ignition (DSI) Module with Three Tries
Ignitor Probe Assembly with 19” Leads
1/2” Black Union
Hi-Limit Mounting Bracket
#6-32 Pal Nut
#6-32 x 1/2” Phillips Round Head Machine Screw
330º Hi-Limit Manual Reset
Pipe Bracket (bent)
3/4” to 1/2” Reducing Coupling
Twin Speed Nut
Sail Switch Box Cover and Bracket ONLY
Sail Switch ONLY
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
1/2” x 29-1/8” Pipe
AD-75D II Liquid Propane (L.P.) Conversion Kit ... Not Illustrated
* Orifices are at sea level for elevations above 2,000 feet. Consult the factory.
** Orifices are not included.
Telephone: (508) 678-9000
Fax: (508) 678-9447
36
Illus. No.
Single-Phase (1Ø) Motor, Electric Relay Panel Assembly
Part No.
Qty.
1
2
3
132475
150299
824828
1
2
1
-
322809
150301
1
4
American Dryer Corporation
Description
2-Pole Contactor - 24 VAC
#10 x 1” Hex Head TEK Screw
RC Network with Connectors
(for microprocessor controller [computer] models Only)
Back Electrical Box Cover ... Not Illustrated
#8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated
88 Currant Road / Fall River, MA 02720-4781
37
3-Phase (3Ø) Motor, Electric Relay Panel Assembly
Illus. No.
*
Part No.
Qty.
1
2
3
322812
132430
137015
1
1
1
4
5
6
7
8
9
10
11
-------
150103
151001
153002
152004
120701
150008
151000
121300
322809
150301
---------*
2
2
1
1
1
2
2
3
1
4
1
Description
Back Electrical Box Component Plate
Impellor Contactor (208/230/240v, 50/60 Hz) - 24 VAC
RC Network
(for microprocessor controller [computer] models Only)
#8-32 x 3/4” Phillips Round Head Machine Screw
#8-32 Pal Nut
5/16” Lock Washer
5/16-18 Hex Nut
4-Position Terminal Block
#6-32 x 1-1/4” Slotted Round Head Machine Screw
#6-32 Pal Nut
Open/Closed Bushing
Back Electrical Box Cover ... Not Illustrated
#8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated
Transformer
Refer to Step Down Transformer Usage Listing on page 46.
Telephone: (508) 678-9000
Fax: (508) 678-9447
38
Microprocessor Reversing Rear Control Box Assembly
For Gas, Electric, and Steam Models
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
------*
Part No.
Qty.
322812
137060
137013
882386
150103
151001
153002
152004
132430
150103
151001
120701
150008
151000
121300
322809
150301
---------*
1
1
4
1
2
2
1
1
1
2
2
1
2
2
3
1
4
1
Description
Back Electrical Box Component Plate
Arc Suppressor (A.S.) Board
Nylon Standoff
Reversing Contactor (208/230/240v, 50/60 Hz) - 24 VAC
#8-32 x 3/4” Phillips Round Head Machine Screw
#8-32 Pal Nut
5/16” Lock Washer
5/16-18 Hex Nut
Impellor Contactor (208/230/240v, 50/60 Hz) - 24 VAC
#8-32 x 3/4” Phillips Round Head Machine Screw
#8-32 Pal Nut
4-Position Terminal Block
#6-32 x 1-1/4” Slotted Round Head Machine Screw
#6-32 Pal Nut
Open/Closed Bushing
Back Electrical Box Cover ... Not Illustrated
#8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated
Transformer
Refer to Step Down Transformer Usage Listing on page 46.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
39
Dual Timer Reversing Rear Control Box Assembly
For Gas, Electric, and Steam Models
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
------*
Part No.
Qty.
322812
132198
150301
882386
150103
151001
153002
152004
132430
150103
151001
120701
150008
151000
121300
322809
150301
---------*
1
1
2
1
2
2
1
1
1
2
2
1
2
2
3
1
4
1
Description
Back Electrical Box Component Plate
Reversing Timer (50/60 Hz) - 24 VAC
#8-18 x 7/16” Phillips Pan Head TEK Screw
Reversing Contactor (208/230/240v, 50/60 Hz) - 24 VAC
#8-32 x 3/4” Phillips Round Head Machine Screw
#8-32 Pal Nut
5/16” Lock Washer
5/16-18 Hex Nut
Impellor Contactor (208/230/240v, 50/60 Hz) - 24 VAC
#8-32 x 3/4” Phillips Round Head Machine Screw
#8-32 Pal Nut
4-Position Terminal Block
#6-32 x 1-1/4” Slotted Round Head Machine Screw
#6-32 Pal Nut
Open/Closed Bushing
Back Electrical Box Cover ... Not Illustrated
#8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated
Transformer
Refer to Step Down Transformer Usage Listing on page 46.
Telephone: (508) 678-9000
Fax: (508) 678-9447
40
American Dryer Corporation
Air Operated Steam Damper Assembly
88 Currant Road / Fall River, MA 02720-4781
Air Operated Steam Damper Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
165009
153002
152004
152002
153007
820321
803415
1
6
6
4
4
2
1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
153007
152002
115995
102350
151007
152007
100497
100492
152002
153007
100472
143110
100472
100496
143238
100498
150002
153010
152000
330987
152002
153007
100520
4
4
108
1
1
1
1
1
4
4
1
1
1
1
1
1
2
2
2
1
2
2
1
Telephone: (508) 678-9000
41
Description
Steam Coil Assembly
5/16” Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4” Lock Washer
Steam Damper Hinge Assembly
Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
1/4” Lock Washer
1/4-20 Hex Nut
Steam Damper Gasket (sold by the inch)
Steam Damper Foam (68-1/2” length)
7/16-20 Stainless Steel Acorn Nut
7/16-20 Hex Nut
1-1/4” Bore x 3” Stroke Piston
Piston Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/4” x 1/8” Connector
1/4” Tubing (sold by the foot)
1/4” x 1/8” Connector
1/8” Needle Valve
1/8” Close Nipple
3-Way Micro Valve - 24 VAC
#6-32 x 1” Phillips Round Head Machine Screw
#6 Star Washer
#6-32 Hex Nut
Micro Valve Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/8” N.P.T. Silencer (muffler)
Fax: (508) 678-9447
42
Outer Top/Back Guard Assemblies
For Gas and Electric Models ONLY
Illus. No.
1
2
3
4
5
6
7
8
9
Part No.
322809
150301
323738
150301
150301
312527
314526
150301
103500
Qty.
1
5
1
6
8
1
1
10
4
American Dryer Corporation
Description
Back Electrical Box Cover
#8-18 x 7/16” Phillips Pan Head TEK Screw
Top Back Guard
#8-18 x 7/16” Phillips Pan Head TEK Screw
#8-18 x 7/16” Phillips Pan Head TEK Screw
Outer Top Guard
Lower Back Guard
#8-18 x 7/16” Phillips Pan Head TEK Screw
Leveling Leg
88 Currant Road / Fall River, MA 02720-4781
43
Back Guard Assembly
For Steam Models ONLY
Illus. No.
1
2
3
4
5
Part No.
314511
150300
150301
322809
150301
103500
Qty.
1
2
8
1
4
4
Telephone: (508) 678-9000
Description
Bottom Back Guard
#10 x 1/2” Hex Washer TEK Screw
#8-18 x 7/16” Phillips Pan Head TEK Screw
Back Electrical Box Cover
#8-18 x 7/16” Phillips Pan Head TEK Screw
Leveling Leg
Fax: (508) 678-9447
44
Microprocessor Coin Acceptors Listing
NOTE: Coin acceptors listed include optical switch.
Replacement optic switch for Hanke acceptors is Part No. 881143.
Replacement optic switch for Greenwald acceptors is Part No. 137056.
Single Coin*
ADC Part No.
Nation
882689
United States
125100
U.S. and Canada
125107
881768
881604
125103
125121
125133
Australia
Australia
Japan
----Hong Kong
Description
25¢ Hanke Optic Coin Acceptor
(includes optic switch PN-881143)
For Models Mfd. as of June 15, 2000
25¢ Optic Coin Acceptor
(for models mfd. prior to June 15, 2000)
20¢ Greenwald Australian Optic Coin Acceptor
$1 Hanke Australian Optic Coin Acceptor
100 Yen Hanke Optic Coin Acceptor
0.882 Token Greenwald Optic Coin Acceptor
0.800 Token Greenwald Optic Coin Acceptor
$1 Greenwald Hong Kong Optic Coin Acceptor
Dual Coin*
881508
881842
881542
881846
881541
*
U.S. and Canada
Canada
United Kingdom
France
Netherlands
10¢ / 25¢ Hanke Dual Optic Coin Acceptor
25¢ / $1 Hanke Dual Optic Coin Acceptor
1£ / 20 Pence Hanke Dual Optic Coin Acceptor
2 / 5 Franc Hanke Dual Optic Coin Acceptor
25¢ / 1 Guilder Hanke Dual Optic Coin Acceptor
Consult factory for coin acceptors not listed.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Phase Wire
Elements
Oven Assembly*
Part No.
Qty. Size Part No.
Oven Wire
Terminal Lug
Qty. Size Part No.
Qty. Part No.
B u s B ar
P/N 121011
Oven Relay
Volt
40
416
3ø
3 or 4
824822
6
6.6
120027
4
#6
13 3 2 0 0
9
121010
1
DFAG
131361
36
208
3ø
3 or 4
824921
6
6
120015
4
#2
133302
4
121012
1
GEAJ
131385
36
230
3ø
3
824920
6
6
120014
4
#2
13 3 3 0 2
9
121012
1
FEAJ
131375
36
416
3ø
3 or 4
824921
6
6
120015
4
#4
133300
4
121012
1
DFAG
131361
36
460/480
3ø
3 or 4
824920
6
6
120014
4
#2
133302
9
121012
1
DPA43
131357
33
380
3ø
3 or 4
825078
6
6.6
120015
5
#2
--------
4
121012**
1
DFAJ
131361
30
208
3ø
3 or 4
8 2 4 9 18
6
5
120012
6
#4
133300
3
121012
1
FEAJ
131375
30
230
3ø
3
824935
6
5
120013
3
#4
133300
4
121012
1
FEAJ
131375
30
416
3ø
3 or 4
824947
6
5
120012
4
#8
133100
6
121010
2
DPA43
131357
30
460/480
3ø
3 or 4
824953
6
5
120013
4
#8
133100
6
121010
2
BFAJ
131351
25
380
3ø
3 or 4
824940
6
5
120012
4
#8
133100
6
121010
2
BFAJ
131351
24
208
3ø
3 or 4
8 2 4 9 16
6
4
120010
3
#4
133300
4
121012
1
DPA63
131369
24
230
3ø
3
824933
6
4
120011
3
#6
133200
3
121010
1
DFAG
131361
24
416
3ø
3 or 4
824946
6
4
120010
4
#8
133100
6
121010
2
BFAJ
131351
24
460/480
3ø
3 or 4
824952
6
4
120011
4
#10
133000
6
121010
2
BFAJ
131351
20
208
1ø
2
824904
5
4
120010
2
#4
133300
2
121010
2
GEAJ
13 13 8 5
20
230
1ø
2
824926
5
4
120011
2
#4
133300
3
121010
2
FEAJ
131375
20
380
3ø
3 or 4
824939
6
4
120010
4
#10
133000
6
121010
2
BFAJ
131351
Cat. No. Part No.
*
Oven assembly complete does not include oven relay. This item must be ordered separately. When ordering Oven Assembly Complete, specify 3
wire or 4 wire when applicable, as well as if dryer has microprocessor controller (computer) or non-microprocessor controls.
** Wire is included with the terminal lugs.
45
Fax: (508) 678-9447
Kw
Electric Oven Component Application Chart
Telephone: (508) 678-9000
ADE-75D II
46
Step Down Transformer Usage Listing
S TEP DOW N TRANSFORM ER
USAGE L ISTING
Voltage
Wire
Service
Transformer
Part No.
380
3
132059
380
4
132059
GAS
416
3
132062
ELECTRIC
STEAM
416
4
132062
460/480
3
132053
460/480
4
132053
575
3
132050
Heat
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Additional Parts Available
Part No.
112039
112280
112041
112534
114006
120100
120300
120400
120500
120600
120800
120802
120902
120903
121014
121499
121500
121503
122804
404500
404502
404506
404507
410001
880200
880884
47
Description
“Black/White/Green Ground” Label
“Clean Lint Screen” Label
“CAUTION - Exhaust” Label
“Phase 5 OPL Program Location Summary” Label
“WARNING - Fire Hazards” Label
3/8” Straight (BX) Connector
3/8” x 45° (BX) Connector
3/8” Red Jacket (BX) Insulator
3/8” Jiffy Clip (BX retainer clip)
3/8” Greenfield (BX)
1/4” In-Line Connector
Red Butt Connector
#74B Wire Nut
Closed End Connector
1/4” Insulated (female) Terminal
5-1/2” Harness Tie
7” Harness Tie
Harness Tie Mounting Clip
Manometer (hydro gauge) For Measuring Gas Pressure
Almond Brush-In-Cap Bottle Touch-Up Paint
White Brush-In-Cap Bottle Touch-Up Paint
Almond “B” Brush-In-Cap Bottle Touch-Up Paint
Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
1/2” Allen Wrench (for removal of shutoff valve tail piece)
Electrical Terminal (assortment) Kit
Basket (tumbler) Bearing Puller
Telephone: (508) 678-9000
Fax: (508) 678-9447
ADC 450432
1 - 12/11/00-25
2 * 09/10/01-25