Transcript
PowerDsine PoE AF/AT Tester Easy-to-use Power over Ethernet Tester Tester Specifications Input RJ-45 Connector Dimensions 22 mm (H) x 24 mm (W) x 76 mm (L) 0.87 in (H) x 0.94 in (W) x 2.99 in (L) Weight 15 g Indicators Midspan LED display (Green/Blue) Environmental Conditions Operating Ambient Temperature: 32º to 104ºF (0 to 40ºC) Operating Humidity: Max 90%, Non-condensing Storage Temperature: –4º to 158ºF (–20º to 70ºC) Storage Humidity: Max 95%, Non-condensing RegulatoryCE Compliance Ordering Information Overview Check your RJ-45 outlet for power using the PoE AF/AT Tester. The Power over Ethernet (PoE) Tester, connected to an RJ-45 outlet, tests the cabling infrastructure for the presence of power, either IEEE802.3af or IEEE802.3at (2-pairs 30W or 4-pairs 60W). The PoE Tester also identifies the existence and type of Power Sourcing Equipment (either Endspan* or Midspan) in your network. Part Number Name PD-AFAT-Tester Power over Ethernet Tester for RJ-45 Outlet For More Information North America Features [email protected] • Tests RJ-45 outlet for Power over Ethernet existence LATAM (Latin America) [email protected] • Indicates the type of power source • Detects: EMEA (Europe, Middle East, Africa) - IEEE 802.3af [email protected] - IEEE 802.3at - 4-pairs PSE • Compact design specifically tailored for system integrators and installers • Plug and play, simple to use * The Tester will detect 802.3at switches that have implemented “2-event” classification (802.3at switches without “2-event” or non-standard compliant switches will be detected as af). APAC (Asia Pacific) [email protected] ©2012 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners. MSC-PD-Tester
