Download Eaton S-Series 42U
Transcript
Eaton.com/S-Series Eaton S-Series Rack Unmatched reliability and service for your critical IT electronics and servers Designed for small and medium-sized businesses, the Eaton S-Series Rack with rack hygiene supports and optimizes IT equipment. These standard configured racks are scalable and integrate an array of options including cable management, power distribution and backup power to provide a full network solution. Features • • • • • • • • • • Enhanced frame ensures zero leakage around the front perimeter and also features oval grommets in front frame verticals for cable pass-thru between racks. High flow single front door with 75 percent open perforation pattern High flow split rear door with 75 percent open perforation pattern Top panel with two six inch wide brushed openings for cable egress Standard models available with side or divider panels 19 inch EIA-310 vertical mounting rails (quantity four) with U-markings Vertical blanking panels (quantity two) with cable passthru for 30 inch wide models only Integrated cable trough for overhead cable distribution Grounding pre-installed Color: Black To interact with the Eaton S-Series rack, please visit Eaton.com/S-Series EATON S-SERIES RACKS Catalog Number Configuration Height U Width, in Depth, in Approx. Unit Weight, lb Casters ETN-ENC422442SB With side panels (2) 42 24 42 367 Yes ETN-ENC422442S With divider panel (1) 42 24 42 309 Yes ETN-ENC423042S With divider panel (1) 42 30 42 351 Yes ETN-ENC422448S With divider panel (1) 42 24 48 321 Yes ETN-ENC423048S With divider panel (1) 42 30 48 364 Yes ETN-ENC422442SE Without panels and doors 42 24 42 171 No ETN-ENC482442S With divider panel (1) 48 24 42 336 Yes ETN-ENC483042S With divider panel (1) 48 30 42 380 Yes ETN-ENC482448S With divider panel (1) 48 24 48 350 Yes ETN-ENC483048S With divider panel (1) 48 30 48 394 Yes Standard feature Optional accessories* Cable management Solid side panel Accomodates large cable quantities and provides unmatched rack-to-rack, raised floor, and overhead cable access. A solid side panel kit (qty. 1) is available to further enclose your rack where end-of-row or single-rack aesthetics are necessary. SOLID SIDE PANELS Optional accessories* Cable rings Allows for vertical cable management with flexible mounting to multiple points. Catalog Number Height Width ETN-ACC4842SP 48U 42" ETN-ACC4848SP 48U 48" ETN-ACC4242SP 42U 42" ETN-ACC4248SP 42U 48" Blanking panels Lacing bars Flexible management bar for attaching/mounting cables and power strips. Tool-less plastic blanking panels prevent air recirculation. Floor grommet Allows maximum pressure to be maintained in the sub-floor plenum when cables are installed. Lifetime warranty Eaton Corporation Electrical Sector 8609 Six Forks Road Raleigh, NC 27615 800-356-5794 Eaton.com/powerquality © 2012 Eaton Corporation All Rights Reserved Publication No. ITRACK03FXA/0512 Eaton S-Series racks are backed by a limited lifetime warranty. *For a complete listing of available accessories, please visit Eaton.com/S-Series and click on the options tab.