Download Panasonic ET-D75LE10 projection lense
Transcript
S P E C F I L E ET-D75LE10 Zoom Lens for DLP ™ Projectors This zoom lens is designed for use with the PT-DZ8700, PT-DZ110X or other 3-chip DLP ™ projector. The lens makes it possible to vary the projection distance by changing the focal distance. NOTE: Please use the lens only on the specified Panasonic 3-chip DLP ™ projector. Specifications F value: Focal distance (f): Throw ratio: 2.5 27.4 mm – 35.4 mm 1.3 – 1.7:1 for PT-DZ12000/DZ8700 (16:10 aspect ratio), 1.4 – 1.8:1 for PT-D12000/DS8500 (4:3 aspect ratio), 1.4 – 1.9:1 for PT-DW100/DW8300 (16:9 aspect ratio) 150 × 150 × 269 mm (5-29/32˝ × 5-29/32˝ × 10-19/32˝) 6.1 kg (13.4 lbs) Dimensions (W × H × D): Weight: The throw ratio is an approximate value calculated by dividing the screen width by the projection distance. DLP and the DLP logo are trademarks of Texas Instruments. Weights and dimensions shown are approximate. Specifications subject to change without notice. ∅150 ( 5-29/32) Dimensions 269 (10-19/32) The illustration shows the lens attached to the PT-DZ12000/D12000/DW100. 73 (2-7/8) 607 (23-29/32) The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X. 125 (4-29/32) As of September 2010 SFD10A001-1 540 (21-1/4) unit : mm (inch) NOTE: This illustration is not drawn to scale. 1/1 S P E C F I L E ET-D75LE20 Zoom Lens for DLP ™ Projectors This zoom lens is designed for use with the PT-DZ8700, PT-DZ110X or other 3-chip DLP ™ projector. The lens makes it possible to vary the projection distance by changing the focal distance. NOTE: Please use the lens only on the specified Panasonic 3-chip DLP ™ projector. Specifications F value: Focal distance (f): Throw ratio: 2.5 35.0 mm – 50.9 mm 1.7 – 2.4:1 for PT-DZ12000/DZ8700 (16:10 aspect ratio), 1.8 – 2.6:1 for PT-D12000/DS8500 (4:3 aspect ratio), 1.8 – 2.7:1 for PT-DW100/DW8300 (16:9 aspect ratio) 134 × 134 × 265 mm (5-9/32˝ × 5-9/32˝ × 10-7/16˝) 5.2 kg (11.5 lbs) Dimensions (W × H × D): Weight: The throw ratio is an approximate value calculated by dividing the screen width by the projection distance. DLP and the DLP logo are trademarks of Texas Instruments. Weights and dimensions shown are approximate. Specifications subject to change without notice. ∅134 ( 5-9/32) Dimensions 265 (10-7/16 ) The illustration shows the lens attached to the PT-DZ12000/D12000/DW100. 69 (2-23/32) 607 (23-29/32) The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X. 121 (4-3/4) As of September 2010 SFD10A002-1 540 (21-1/4) unit : mm (inch) NOTE: This illustration is not drawn to scale. 1/1 S P E C F I L E ET-D75LE30 Zoom Lens for DLP ™ Projectors This zoom lens is designed for use with the PT-DZ8700, PT-DZ110X or other 3-chip DLP ™ projector. The lens makes it possible to vary the projection distance by changing the focal distance. NOTE: Please use the lens only on the specified Panasonic 3-chip DLP ™ projector. Specifications F value: Focal distance (f): Throw ratio: 2.5 50.5 mm – 97.9 mm 2.4 – 4.7:1 for PT-DZ12000/DZ8700 (16:10 aspect ratio), 2.6 – 5.1:1 for PT-D12000/DS8500 (4:3 aspect ratio), 2.7 – 5.2:1 for PT-DW100/DW8300 (16:9 aspect ratio) 134 × 134 × 265 mm (5-9/32˝ × 5-9/32˝ × 10-7/16˝) 5.2 kg (11.5 lbs) Dimensions (W × H × D): Weight: The throw ratio is an approximate value calculated by dividing the screen width by the projection distance. DLP and the DLP logo are trademarks of Texas Instruments. Weights and dimensions shown are approximate. Specifications subject to change without notice. ∅134 ( 5-9/32) Dimensions 265 (10-7/16 ) The illustration shows the lens attached to the PT-DZ12000/D12000/DW100. 69 (2-23/32) 607 (23-29/32) The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X. 121 (4-3/4) As of September 2010 SFD10A003-1 540 (21-1/4) unit : mm (inch) NOTE: This illustration is not drawn to scale. 1/1 S P E C F I L E ET-D75LE40 Zoom Lens This zoom lens is designed for use with Panasonic’s applicable projectors. The lens makes it possible to vary the projection distance by changing the focal distance. NOTE: Please use the lens only on the specified Panasonic projector. Specifications F value: Focal distance (f): Throw ratio: 2.5 96.6 – 154.1 mm 4.6 – 7.4:1 for PT-DZ21K/DZ8700/DZ110X (16:10 aspect ratio), 5.0 – 8.0:1 for PT-DS20K/DS8500/DS100X (4:3 aspect ratio), 5.1– 8.2:1 for PT-DW17K/DW8300/DW90X (16:9 aspect atio) 130 × 130 × 268 mm (5-1/8 × 5-1/8 × 10-9/16 inches) Approximately 5.0 kg* (11.0 lbs*) PT-DZ21K/DS20K/DW17K/DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X Dimensions (W × H × D): Weight: Applicable projector: * Average value. May differ depending on the actual unit. The throw ratio is an approximate value calculated by dividing the screen width by the projection distance. ∅130 ( 5-1/8 ) Dimensions 268 (10-9/16 ) The illustration shows the lens attached to the PT-DZ21K/DS21K/DW17K. 124 (4-7/8 ) 730 (28-7/8 ) The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X. 124 (4-7/8 ) 540 (21-1/4) unit : mm (inch) NOTE: This illustration is not drawn to scale. NOTE: Please read the projector’s instruction manual for throw distances. Weights and dimensions shown are approximate. Specifications subject to change without notice. As of April 2012 SFD12A008 1/1 S P E C F I L E ET-D75LE50 Fixed-Focus Lens This fixed-focus lens is designed for use with Panasonic’s applicable projectors. The short-throw lens is ideal for rear projection. NOTE: Please use the lens only on the specified Panasonic projector. Specifications F value: Focal distance (f): Throw ratio: 2.5 14.8 mm 0.7:1 for PT-DZ21K/DZ8700/DZ110X (16:10 aspect ratio), 0.8:1 for PT-DS20K/DS8500/DS100X (4:3 aspect ratio), 0.8:1 for PT-DW17K/DW8300/DW90X (16:9 aspect atio) 160 × 160 × 347 mm (6-5/16 × 6-5/16 × 13-21/32 inches) Approximately 7.1 kg* (15.7 lbs*) PT-DZ21K/DS20K/DW17K/DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X Dimensions (W × H × D): Weight: Applicable projector: * Average value. May differ depending on the actual unit. The throw ratio is an approximate value calculated by dividing the screen width by the projection distance. ∅160 ( 6-5/16 ) Dimensions 347 (13-21/32) The illustration shows the lens attached to the PT-DZ21K/DS21K/DW17K. 203 (8) 730 (28-3/4) The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X. 203 (8) 540 (21-1/4) unit : mm (inch) NOTE: This illustration is not drawn to scale. NOTE: Please read the projector’s instruction manual for throw distances. Weights and dimensions shown are approximate. Specifications subject to change without notice. As of April 2012 SFD12A009 1/1 S P E C F I L E ET-D75LE6 Zoom Lens for DLP ™ Projectors This zoom lens is designed for use with the PT-DZ8700, PT-DZ110X or other 3-chip DLP ™ projector. The lens makes it possible to vary the projection distance by changing the focal distance. NOTE: Please use the lens only on the specified Panasonic 3-chip DLP ™ projector. Specifications F value: Focal distance (f): Throw ratio: 2.5 19.63 mm – 23.54 mm 0.9 – 1.1:1 for PT-DZ12000/DZ8700 (16:10 aspect ratio), 1.0 – 1.2:1 for PT-D12000/DS8500 (4:3 aspect ratio), 1.0 – 1.2:1 for PT-DW100/DW8300 (16:9 aspect ratio) 160 × 160 × 356.5 mm (6-5/16˝ × 6-5/16˝ × 14-1/32˝) 8.7 kg (19.2 lbs) Dimensions (W × H × D): Weight: The throw ratio is an approximate value calculated by dividing the screen width by the projection distance. DLP and the DLP logo are trademarks of Texas Instruments. Weights and dimensions shown are approximate. Specifications subject to change without notice. ∅160 ( 6-5/16 ) Dimensions 356.5 (14-1/32) The illustration shows the lens attached to the PT-DZ12000/D12000/DW100. OUT IN REMOTE 1 R/PR OUT VIDEO 160 ( 6-5/16 ) RS-232C IN REMOTE 2 IN IN G/Y SYNC/HD S-VIDEO IN RGB 1 IN RS-422 IN SERIAL RS-422 OUT LAN B/PB VD RGB 2 IN DVI-D IN 607 (23-29/32) The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X. 212 ( 8-11/32) As of September 2010 SFD10A006-1 540 (21-1/4) unit : mm (inch) NOTE: This illustration is not drawn to scale. 1/1 S P E C F I L E ET-D75LE8 Zoom Lens for DLP ™ Projectors This zoom lens is designed for use with the PT-DZ8700, PT-DZ110X or other 3-chip DLP ™ projector. The lens makes it possible to vary the projection distance by changing the focal distance. NOTE: Please use the lens only on the specified Panasonic 3-chip DLP ™ projector. Specifications F value: Focal distance (f): Throw ratio: 2.5 – 2.7 154 mm – 289 mm 7.3 – 13.8:1 for PT-DZ12000/DZ8700 (16:10 aspect ratio), 7.9 – 15.0:1 for PT-D12000/DS8500 (4:3 aspect ratio), 8.2 – 15.4:1 for PT-DW100/DW8300 (16:9 aspect ratio) 150 × 150 × 404 mm (5-29/32˝ × 5-29/32˝ × 15-29/32˝) 8.5 kg (18.7 lbs) Dimensions (W × H × D): Weight: The throw ratio is an approximate value calculated by dividing the screen width by the projection distance. DLP and the DLP logo are trademarks of Texas Instruments. Weights and dimensions shown are approximate. Specifications subject to change without notice. ∅150 ( 5-29/32) Dimensions 404 (15-29/32) The illustration shows the lens attached to the PT-DZ12000/D12000/DW100. IN OUT REMOTE 1 R/PR OUT VIDEO 202.5 (7-31/32) RS-232C IN REMOTE 2 IN IN G/Y SYNC/HD S-VIDEO IN RGB 1 IN RS-422 IN SERIAL RS-422 OUT LAN B/PB VD RGB 2 IN DVI-D IN 607 (23-29/32) The illustration shows the lens attached to the PT-DZ8700/DS8500/DW8300/DZ110X/DS100X/DW90X. 254 (10) As of September 2010 SFD10A007-1 540 (21-1/4) unit : mm (inch) NOTE: This illustration is not drawn to scale. 1/1