Transcript
FLASH DUPLICATION CopyWriter NEW! Flash Duplicators USB FLASH DUPLICATOR FEATURES Copy USB thumb drives in a flash with the Microboards CopyWriter Flash Duplicators. Available in 3, 7, or 11-stick configurations, users can make up to 11 copies at a time in a single system. Making copies with the CopyWriter Flash Duplicator is easy; simply insert your master thumb drive and up to 11 blank devices, then press the OK button. • Available in 3, 7, & 11 recording slots • Standalone—No PC required • 64 MB on-board memory for 3-stick system 256 MB on-board memory for 7 and 11-stick systems • Works with all popular USB drives • Record Speed: 10 MB/sec • Erase function removes data from flash drives • One-touch operation • One-year warranty • Power supply: 72W 90V ~ 240V AC 3, 7-SLOT SPECIFICATIONS Asynchronous copying technology and a large memory cache allows for every slot to operate independently. Copy jobs of any size (64 MB on-board memory with 3-stick configuration, 256 MB for 7- and 11-stick systems) and permit target devices to be unloaded and loaded on the fly. As soon as a slot signals ready, you can remove the finished, copied media and insert another blank device. • Product Weight: 4.54 kg • Product Dimensions: 17cm H x 19cm W x 29 cm D 11-SLOT SPECIFICATIONS • Product Weight: 7.71 kg Because these copiers operate without the help of a PC, they’re easy for anyone to use. Bit-level comparison ensures a successful copy every time. All current formats (Fat 16, Fat 32) are supported, and the unit is backed by Microboards’ industry-leading support with a one-year warranty and lifetime phone support. CopyWriter Flash Duplicators can also be used to erase content from flash devices, leaving you with a clean, unformatted device. • Product Dimensions: 26.5cm H x 19cm W x 43cm D Also available in 3-slot and 7-slot configurations! As the cost of flash memory comes down, the distribution of information on flash becomes more and more viable for companies in the following areas: Marketing, Sales Support, Education, Government, Engineering, Audio/Video, and more!