Download Shuttle PV02 mounting kit

Product Specification
XG41 VESA Mount (PV02) – Quick Installation Guide
Please install with reference to the following
steps:
Due to safety reasons, please turn off your
computer completely first and unplug it
from the power supply.

 Please unpack the PV02 VESA mount
accessory and two screws.
 Fasten the VESA MOUNT at rear of LCD
monitor with two screws.

©2009 by Shuttle Computer Handels GmbH (Germany). All Information subject to change without notice. Pictures for illustration puposes only.
 As shown, install the XG41 in the VESA
MOUNT and push it towards the direction
as indicated by the red arrow.
 Slide the latch into the lock position.
 Check that it is properly aligned, then
tighten securely with one thumbscrew.



Page 2 | 11 August 2011
www.shuttle.com
Shu t tl e Computer Han dels GmbH
Fritz- Strassmann-S t r. 5
25337 Elmshorn | Germany
Tel. +49 (0) 4121-47 68 60
Fax +49 (0) 4121-47 69 00
[email protected]