Transcript
datasheet Austin Taylor Communications Ltd Bethesda, Gwynedd, Ll57 3BX, UK RJ11 style Linejacks The Austin Taylor range of RJ11 style linejacks features 6 poisition, 6 conductor Western Electric style sockets. All variants are shuttered and use Krone style IDC terminals for fast and efficient installation. The 2 Series variant supports a single line and is supplied with a surface mount back-box. The 3 Series variant supports a single line and is suitable for surface or flush mounting onto a standard BS3662 size UA1 (LJ3) backbox. Technical Summary The 4 Series variant supports two separtate lines and is suitable for surface or flush mounting onto a standard BS3662 size UA1 (LJ3) backbox. Dimensions (2 Series) 86mm x 86mm x 21mm Dimensions (3&4 Series) 86mm x 86mm x 21mm Colour Bright white (BT 1P) Faceplate material ABS Wire termination Krone style IDC colour coded to T568B RJ11 sockets 6 position, 6 contact. Gold plated contacts Accessories (2 Series) Supplied with cable tie(s) & fixing screws for supplied backbox Accessories (3&4 Series) Supplied with cable tie(s) & fixing screws for standard backboxes (which are available separately) 2 Series RJ11 linejack supplied with backbox A subsidiary of Communications Systems Inc. UK Tel: 01248 602555 UK Fax: 01248 600370 Int. Tel: +44 1248 602555 Int. Fax: +44 1248 600370 http://www.austin-taylor.co.uk Ordering Information Description Part No. Carton Multiple 2 Series RJ11 linejack (WE 6/2/3A) 9LJU167260 200 3 Series RJ11 linejack (WE 6/3/3A) 9LJU163820 200 4 Series RJ11 linejack (WE 6/4/3A) 9LJU163880 200 BS EN ISO 9001 Reg No: Q5117 AUSTIN Copyright © 2001 Austin Taylor Communications Ltd, Revision Date 21st June 2001 Datasheet No: LJ08B Austin Taylor Communications Ltd reserves the right to change the specification of the products described in this datasheet without notice TAYLOR