Download Samsung SHD-300C
Transcript
INSTALLATION MANUAL – SHD-200C / SHD-300C Corner Mount Unpacking Unpack carefully. This is mechanical equipment and should be handled with care. If an item appears to have been damaged in shipment, replace it properly in its carton and notify the shipper. If any items are missing, notify Broadsight Systems, Inc. The shipping carton is the safest container in which the unit may be transported. Save it for possible future use. Service If the unit ever needs repair service, the customer should contact Broadsight Systems, Inc. for a return materials authorization (RMA) and shipping instructions. Care and Maintenance Perform routine maintenance to keep the unit dust free. Model Designation SHD-200C Large Corner Mount SHD-300C Small Corner Mount Description The Corner Mount Camera Brackets are designed to allow a Samsung Techwin miniature camera to be installed in the corner of a room. Figure 1 - SHD-300C Small Corner Mount Hardware Kit 2 x Screw, #10 x 1-1/4 Pan Head Phillips 2 x Wall Anchor 1 x Wrench, Torx Tamper Resistant Tools Required #2 Phillips Head Screwdriver Certification Camera installation should be performed by a licensed professional and conform to the National Electrical Code (NEC) and any applicable local codes. Installation 1. Remove cover by removing two (2) tamper resistant screws using wrench provided. Set cover aside. 2. Use corner mount backbox as a template to mark installation hole locations. Drill surface using appropriate sized drill bit. Fasteners provided in kit are not ideal for all installation types. 3. Drill hole for cable entry into backbox. Route cables/camera into backbox and attach power/data cable(s). 4. Use appropriate wall anchors and screws to attach backbox to installation surface. 5. Orient camera as needed to achieve desired field of view. 6. Replace cover to complete installation. Made in the USA by Broadsight Systems, Inc. for Samsung Techwin Figure 2 - SHD-200C Large Corner Mount Page 1 of 2 4.4” 112mm 3.7” 95mm 2.0” 51mm 6.0” 152mm 8.4” 213mm 3.6” 92mm 6.0” 152mm 3.4” 86mm 3.6” 92mm 6.0” 152mm SHD-300C SHD-200C Dimensional Drawing Dimensional Drawing Made in the USA by Broadsight Systems, Inc. for Samsung Techwin Page 2 of 2