Download Atdec VISIDEC Focus Articulated Arm Double
Transcript
Technical Specifications A General Features Maximum Load: 6kg (13lbs) per display. Included Hardware: All fasteners and mounting hardware are included. Display Compatibility: Visidec Focus Double is compatible with most Flat Panel Displays between 12” and 21” (30cm and 53.5cm) that feature either 75mm x 75mm (3” x 3”) or 100mm x 100mm (4” x 4”) VESA mounting hole patterns. Tools Required: Power drill, 9mm (³/8”) drill bit, Phillips Head screwdriver. Mounting Options: Visidec Focus Double includes Bolt Through and Desk Clamp mounting options. NOTE: Desk Clamp mounting option is only suitable for displays in side by side configuration. • Bolt Through Suits desktop thicknesses of 12mm - 40mm (1/2” - 11/2”) Colour: Polished Silver. IMPORTANT: Please read the Installation Instructions before mounting Visidec Focus Double • Desk Clamp Suits desktop thicknesses of 12mm - 38mm (1/2” - 11/2”) B Cable Management: Cable management system includes cable slot and cable management clips. Range of Movement 2 1 5 3 4 6 1 +/-70° tilt adjustment 2 +/-95° portrait/landscape adjustment 3 180° pan adjustment 4 360° articulation of arms 5 240° rotation at shoulder 6 355mm (14”) height adjustment NOTE: The back to back monitor configuration shown can only be used in conjunction with the Bolt Through mounting option. The range of movement shown here applies to both arms of Visidec Focus Double. C Overall Dimensions 68mm (211/16”) NOTE: The back to back monitor configuration shown can only be used in conjunction with the Bolt Through mounting option. 467mm (183/8”) 150mm (57/8”) 195mm (711/16”) 54mm (2¹/8”) The range of movement shown here applies to both arms of Visidec Focus Double. 439mm (17¼”) D VESA Display Mounting Options E Min/Max Display Distance VESA Mounting Plate in 100mm x 100mm (4”x 4”) position 90mm (39/16”) 934mm (36¾”) VESA Mounting Plate in 75mm x 75mm (3”x 3”) position 90mm (39/16”) 75mm (3”) Min. Max. 100mm (4”) NOTE: The Visidec Focus Double can be configured so that the displays are positioned side by side. 75mm (3”) The maximum distance from the pole to the back of the display will be determined by the size of the displays. 100mm (4”) F Max. Desk Mounting Options Desk Clamp Bolt Through Desk Clamp suits desktop thicknesses of 12mm - 38mm (½” - 1½”) Bolt Through suits desktop thicknesses of 12mm - 40mm (½” - 1½”) 39mm (1½”) 75mm (3”) 38mm (1½”) 12mm (½”) DESK 65mm (29/16”) 52mm (21/16”) 52mm (21/16”) As LCD Manufacturers are constantly releasing new monitor models, Atdec does not accept responsibility if the mounting hole pattern does not comply with the international VESA standards. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 06.07.07