Transcript
Installation Instructions AC-AP-2010 Adapter plate 200x100mm Component Checklist Hardware M4x6mm (x4) M4x8mm (x4) M4x10mm (x4) TOOLS REQUIRED: • Phillips Head Screwdriver Adapter Plate Installation Procedure ! IMPORTANT - Install Adapter Plate as per Installation Instructions. ! Compatible with VESA mounting head with hole configuration of 75 x 75mm (3”x3”), converting to 200 x 100mm (8”x4”). ! The Manufacturer accepts no responsibility for incorrect installation. Step. 1 Check Components Check you have received all parts against the Component Checklist and Hardware above. Step. 2 Attaching the Adapter Plate to your Mount Head Use appropriate Mounting Screws (supplied) to suit your Mount Head, either Visidec, Spacedec or Telehook. Visidec Spacedec Adapter Plate M4x8mm Telehook M4x6mm Mounting Screws (x4) Back of Display M4x8mm Step. 3 Attaching the Adapter Plate to your Display Fix your Display to the Adapter Plate using the Mounting Screws supplied with your existing TV/monitor mount. Installation Complete. No portion of this document or any artwork contained here in should be reproduced in any way without the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 04.03.09 c