Download APC Smoke Sensor

Smoke Sensor—AP9323
3. Route the cable through the hole on the mounting bracket.
4. Secure the sensor to the base— rotate it clockwise and lock it in place.
5. Choose a location in the enclosure for the sensor. It may be mounted at any unused position
along one of the front or rear vertical mounting rails.
6. Install two caged nuts (provided with the enclosure) above and below a notched hole on one
vertical mounting rail in your chosen location.
The sensor occupies two U-spaces. A notched hole on the enclosure’s vertical rail
denotes the middle of a U-space.
Note
2U
2
Smoke Sensor — AP9323