Download GP Batteries NiMH rechargeable batteries GP's NiMH rechargeable batteries 9V series

Transcript
Data Sheet
`Type
Nominal Dimension
(with Sleeve)
Applications
Model No.: GP17R8H
: Rechargeable Nickel Metal Hydride
Cylindrical Cell
15.7 mm(l) x 26.5 mm(w) x 48.5 mm(h)
: Recommended discharge current
17 to 510 mA
Fast Charge (charge control required)
11.2
: 8.4V
9.8
Capacity
: Minimum: 170 mAh
Typical: 175 mAh
when discharged at 0.2C to 1.0V at 20oC
: 17 mA for 16 hrs at 20oC
9.1
: 85 mA to 170 mA (0.5 to 1C)
charge termination control recommended
control parameters:
-∆V : 0 - 35mV
DT/dt ** : 0.8oC/min (0.5 to 0.9C)
: 0.8 - 1oC/min (1C)
TCO ** : 45 - 50oC
Timer **: 105% nominal input
** For reference only
7.7
Fast Charge
Service Life
Continuous
Overcharge
Weight
Internal Resistance
: >500 cycles (IEC standard)
Up to 1000 cycle (noy less than 60% of
Nominal at 0.1C charge / 0.2C Discharge)
: 17 mA maximum current for 1 year
No conspicuous deformation
and/or leakage
: 32.0 g
: Maximum 2000 mΩupon fully charged
at 1000HZ
Max. Charging Voltage : 10.5V at 17 mA charging
Ambient Temperature : Standard Charging
Range
Fast Charging
Discharging
Storage
:
:
:
:
0 to 45oC
10 to 45oC
-20 to 50oC
-20 to 35oC
170mA
(1C)
10.5
Nominal Voltage
Charging Condition
Voltage (V)
85mA
(0.5C)
8.4
0
20
60
80
100 120 140 160
Capacity Input (%)
Low Rate Discharge
10.5
9.8
9.1
8.4
7.7
7
6.3
5.6
4.9
Voltage (V)
Charge: 17mA x 16hrs at 20oC
85mA
(0.5C)
0
2
34mA
(0.2C)
4
6
17mA
(0.1C)
8
10
12
14
Discharge Time (Hrs)
High Rate Discharge
10.5
Voltage (V)
9.8
Charge: 17mA x 16hrs at 20oC
9.1
8.4
7.7
12.7mm
7
15.7mm
6.3
510mA
(3C)
5.6
0
10
170mA
(1C)
340mA
(2C)
20
30
40
50
60
70
Discharge Time (Mins)
48.50mm
46.00mm
4.9
Unit: mm
26.50mm
40
* The information (subject to change without prior
notice) contained in this document is for
reference only and should not be used as a
basis for product guarantee or warranty. For
applications other than those described here,
please consult your nearest GP Sales and
Marketing Office or Distributors.
Manufacturer reserves the right to alter or amend the design, model and specification without prior notice.
TRS0204 Rev.11