Transcript
assembly instructions H okkaido 2300, 2301, 2302, 2300 bdiusa.com 2310, 2323 Component List 2301 2302 2310 2323 [email protected] Your Hokkaido Furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. A - Glass Panel x 1 NOTE: This instruction sheet is intended for the entire Hokkaido Table collection; model 2300 is shown for illustration. C - Short Metal Leg x 4 Placement and Maintenance Hokkaido Furniture is designed for indoor use on level floors. Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth. B - Wood Panel x 1 Step 1 Unpack and identify the parts listed. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces please contact BDI Customer Service at [email protected]. For all Step 2 other concerns, please contact your BDI Retailer. Lay Glass Panel (A) so that the pucks are facing up. D - Long Metal Leg x 4 Step 3 Install Short Metal Leg (C) to glass puck. Step 4 Lay Wood Panel (B) onto previously installed upper legs. NOTE: Finished wood side facing downward. Step 5 Install Long Metal Leg (D) through wood panel hole and into the threaded hole of Short Metal Leg (C). Step 6 Flip assembled unit over onto base leg position. D B C A Designed by Matthew Weatherly. ‘Hokkaido’ is a trademark of Becker Designed, Inc. All rights reserved. ©2008 Becker Designed, Inc. Made in China. 23002301230223102323REV102209v2 Glass Puck 1 assembly instructions bdiusa.com [email protected]