Download Tecnoware EVO DSP PLUS 2.4 MM

ENGLISH
5.1.3 Acoustic Alarm
Note:
UPS status
Acoustic Alarm
OFF
Battery Mode
Beeping once every 4 seconds
YES
Low Battery
Beeping once every second
Overload
Beeping twice every second
Fault Mode
Beeping continuously
Bypass Mode
Beeping once every 10 seconds
OFF = YES : means that the buzzer can be muted or stopped, by pressing ON/MUTE button.
OFF = NO
5.2
NO
: means that the buzzer can NOT be muted or stopped
Rear Side
2
2
1
3
3
2
1
3
1
6
6
6
5
4
5
5
4
4
EVO DSP PLUS MM 1.2
EVO DSP PLUS MM 2.4
7
EVO DSP PLUS MM 3.6
Figure 4 – Rear Side
1.
Computer Interface (DB9 female connector): it is the communication RS-232 port.
2.
Computer Interface (USB connector): it is the communication USB port.
3.
Slot for SNMP Interface (optional)
4.
Grounded AC Input power socket: to connect the UPS to the AC utility line by the included power cord.
5.
Input Circuit Breaker: it goes off in Overload or short-circuit condition; push the external button of the
Circuit Breaker to reactivate it.
6.
Grounded Output Receptacles: IEC C13 type; to supply critical loads.
7.
Grounded
protected
Output Terminal Block: to connect an Output power line to supply all the devices to be
UPS EVO DSP PLUS MM
11
User’s manual