Download Smeg DOSC36X

Instructions for the installer
12.2 Cable replacement
•
Unscrew the securing screws
from the cover terminal;
•
Remove the tabs
•
cover terminals;
Loosen the cable securing screws
from the lower part of the rear of the
oven
•
•
•
from the
;
Loosen the terminal cables;
Replace the cable securing it to the
terminal as described on the label
on the rear of the appliance;
When the cable has been replaced
repeat the steps described above in
reverse.
1
2
3
Make sure that the cables follow the best route in order to avoid any contact with
the oven.
WARNING: The tightening torque of the screws of the terminal supply wires
must be 1.5 - 2 Nm.
86